4 * author: frank zirkelbach (frank.zirkelbach@physik.uni-augsburg.de)
6 * this program tries helping to understand the amorphous depuration
7 * and recrystallization of SiCx while ion implantation at temperatures
8 * below 400 degree celsius.
9 * hopefully the program will simulate the stabilization of the
10 * selforganizing lamella structure in the observed behaviour.
13 * - J. K. N. Lindner. Habilationsschrift, Universitaet Augsburg.
14 * - Maik Haeberlen. Diplomarbeit, Universitaet Augsburg.
16 * Copyright (C) 2004 Frank Zirkelbach
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License as published by
20 * the Free Software Foundation; either version 2 of the License, or
21 * (at your option) any later version.
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
38 #include <sys/types.h>
48 #define MAKE_AMORPH(N) *(N)|=AMORPH
49 #define MAKE_CRYST(N) *(N)&=~AMORPH
55 puts("-n \t\t no user interaction");
56 puts("-Z \t\t cryst -> amorph c diffusion in z direction");
57 puts("-i \t\t no cryst to cryst diffusion");
58 printf("-a <value> \t slope of nuclear energy loss (default %f)\n",A_EL);
59 printf("-b <value> \t nuclear energy loss offset (default %f)\n",B_EL);
60 printf("-x <value> \t # x cells (default %d)\n",X);
61 printf("-y <value> \t # y cells (default %d)\n",Y);
62 printf("-z <value> \t # z cells (default %d)\n",Z);
63 printf("-s <value> \t steps (default %d)\n",STEPS);
64 printf("-d <value> \t refresh display (default %d)\n",REFRESH);
65 printf("-r <value> \t amorphous influence range (default %d)\n",RANGE);
66 printf("-f <value> \t pressure = <value> * 1/distance^2 (default %f)\n",A_AP);
67 printf("-p <value> \t pressure offset (default %f)\n",B_AP);
68 printf("-F <value> \t proportionality constant between c conc and ability to get amorphous (default %f)\n",A_CP);
69 printf("-A <value> \t slope of linear c distribution (default %f)\n",A_CD);
70 printf("-B <value> \t linear c distribution offset (default %f)\n",B_CD);
71 printf("-D <value> \t diffusion rate from cryst to amorph cells (default %f)\n",DR_AC);
72 printf("-c <value> \t diffusion rate in cryst cells (default %f)\n",DR_CC);
73 printf("-e <value> \t do diffusion every <value> steps (default %d)\n",DIFF_RATE);
74 puts("-g <file> <step> continue simulation from file and step (step > 0)!");
75 printf("-W <value> \t write every <value> steps to save file (default %d)\n",RESAVE);
76 puts("-C <file> \t convert file to gnuplot format");
77 puts("-L <file> \t load from file");
78 puts("-S <file> \t save to file");
79 puts("-R <file> \t read from random file");
80 puts("-P <file> \t specify implantation profile file");
81 printf("-H <value> \t collisions per ion in simulation window (default %d)\n",CPI);
86 int process_cell(d3_lattice *d3_l,u32 x,u32 y,u32 z,info *my_info)
94 thiz=d3_l->status+x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
95 conc=d3_l->extra+x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
96 p=my_info->b_ap*URAND_MAX;
97 for(i=-(my_info->range);i<=my_info->range;i++)
99 for(j=-(my_info->range);j<=my_info->range;j++)
103 off=((x+d3_l->max_x+i)%d3_l->max_x)+((y+d3_l->max_y+j)%d3_l->max_x)*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
104 if(*(d3_l->status+off)&AMORPH) p+=my_info->a_ap*(*(d3_l->extra+off))*URAND_MAX/(i*i+j*j);
108 p+=*conc*my_info->a_cp*URAND_MAX;
111 if(get_rand(URAND_MAX)<=p) MAKE_AMORPH(thiz);
114 /* assume 1-p probability */
115 if(get_rand(URAND_MAX)>p) MAKE_CRYST(thiz);
121 int distrib_c(d3_lattice *d3_l,info *my_info,int step,double c_ratio,u32 rj_m,u32 *rj_g)
128 /* put one c ion somewhere in the lattice */
129 if(my_info->cc<c_ratio*step)
131 x=get_rand(d3_l->max_x);
132 y=get_rand(d3_l->max_y);
133 // printf("nd: %d %d\n",x,y);
134 // z=get_rand_lgp(d3_l->max_z,my_info->a_cd,my_info->b_cd);
135 z=get_rand_reject(d3_l->max_z,rj_m,rj_g);
137 *(d3_l->extra+x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y)+=1;
141 if(step%my_info->diff_rate==0)
144 for(i=0;i<d3_l->max_x;i++)
146 for(j=0;j<d3_l->max_y;j++)
148 for(k=0;k<d3_l->max_z;k++)
150 offset=i+j*d3_l->max_x+k*d3_l->max_x*d3_l->max_y;
151 /* case amorph: amorph <- cryst diffusion */
152 if(*(d3_l->status+offset)&AMORPH)
158 off=((i+d3_l->max_x+c)%d3_l->max_x)+j*d3_l->max_x+k*d3_l->max_x*d3_l->max_y;
160 if(!(*(d3_l->status+off)&AMORPH)) carry=(int)(my_info->dr_ac*(*(d3_l->extra+off)));
163 *(d3_l->extra+offset)+=carry;
164 *(d3_l->extra+off)-=carry;
172 off=i+((j+c+d3_l->max_y)%d3_l->max_y)*d3_l->max_x+k*d3_l->max_x*d3_l->max_y;
174 if(!(*(d3_l->status+off)&AMORPH)) carry=(int)(my_info->dr_ac*(*(d3_l->extra+off)));
177 *(d3_l->extra+offset)+=carry;
178 *(d3_l->extra+off)-=carry;
186 off=i+j*d3_l->max_x+(k-1)*d3_l->max_x*d3_l->max_y;
188 if(!*(d3_l->status+off)&AMORPH) carry=(int)(my_info->dr_ac*(*(d3_l->extra+off)));
191 *(d3_l->extra+off)-=carry;
192 *(d3_l->extra+offset)+=carry;
197 off=i+j*d3_l->max_x+(k+1)*d3_l->max_x*d3_l->max_y;
199 if(!*(d3_l->status+off)&AMORPH) carry=(int)(my_info->dr_ac*(*(d3_l->extra+off)));
202 *(d3_l->extra+off)-=carry;
203 *(d3_l->extra+offset)+=carry;
208 /* case not amorph: cryst <-> cryst diffusion */
209 if(my_info->c_diff) {
210 /* if there is c diff, no diff in z-direction */
216 off=i+((j+c+d3_l->max_y)%d3_l->max_y)*d3_l->max_x+k*d3_l->max_x*d3_l->max_y;
218 if(!(*(d3_l->status+off)&AMORPH))
220 carry=(int)(my_info->dr_cc*(*(d3_l->extra+off)-*(d3_l->extra+offset))/2);
223 *(d3_l->extra+offset)+=carry;
224 *(d3_l->extra+off)-=carry;
233 off=((i+c+d3_l->max_x)%d3_l->max_x)+j*d3_l->max_x+k*d3_l->max_x*d3_l->max_y;
235 if(!(*(d3_l->status+off)&AMORPH))
237 carry=(int)(my_info->dr_cc*(*(d3_l->extra+off)-*(d3_l->extra+offset))/2);
240 *(d3_l->extra+offset)+=carry;
241 *(d3_l->extra+off)-=carry;
254 } /* if step modulo diff_rate == 0 */
259 int calc_pressure(d3_lattice *d3_l,int range)
265 for(x=0;x<d3_l->max_x;x++)
267 for(y=0;y<d3_l->max_y;y++)
269 for(z=0;z<d3_l->max_z;z++)
272 for(i=-range;i<=range;i++)
274 for(j=-range;j<=range;j++)
278 off=((x+d3_l->max_x+i)%d3_l->max_x)+((y+d3_l->max_y+j)%d3_l->max_x)*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
279 if(*(d3_l->status+off)&AMORPH) count+=((double)*(d3_l->extra+off))/(i*i+j*j);
283 if(count>max) max=count;
288 for(x=0;x<d3_l->max_x;x++)
290 for(y=0;y<d3_l->max_y;y++)
292 for(z=0;z<d3_l->max_z;z++)
295 for(i=-range;i<=range;i++)
297 for(j=-range;j<=range;j++)
301 off=((x+d3_l->max_x+i)%d3_l->max_x)+((y+d3_l->max_y+j)%d3_l->max_x)*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
302 if(*(d3_l->status+off)&AMORPH) count+=((double)*(d3_l->extra+off))/(i*i+j*j);
306 *(unsigned char *)(d3_l->v_ptr+x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y)=(unsigned char)(count*255/max);
314 int calc_max_extra(d3_lattice *d3_l)
319 for(x=0;x<d3_l->max_x;x++)
321 for(y=0;y<d3_l->max_y;y++)
323 for(z=0;z<d3_l->max_z;z++)
325 off=x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
326 if(*(d3_l->extra+off)>max) max=*(d3_l->extra+off);
334 int write_ac_distr(d3_lattice *d3_l,int ac_distr)
340 if(ac_distr==1) strcpy(file,"a.plot");
341 if(ac_distr==2) strcpy(file,"c.plot");
342 if(ac_distr==3) strcpy(file,"b.plot");
344 if((fd=open(file,O_WRONLY|O_CREAT))<0)
346 puts("cannot open plot file");
350 for(z=0;z<d3_l->max_z;z++)
352 for(x=0;x<d3_l->max_x;x++)
354 for(y=0;y<d3_l->max_y;y++)
356 offset=x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y;
358 if(*(d3_l->status+offset)&AMORPH) count+=*(d3_l->extra+offset);
360 if(!(*(d3_l->status+offset)&AMORPH)) count+=*(d3_l->extra+offset);
361 if(ac_distr==3) count+=*(d3_l->extra+offset);
364 dprintf(fd,"%d %d\n",z,count);
371 int write_bmp(d3_lattice *d3_l,int window,u32 x,u32 y,u32 z)
373 int fd,i,j,size=0,foo=0,end=0;
374 int width=0,height=0;
375 char bmpfile[MAX_CHARS];
378 if(((window==4)||(window==5))&&(d3_l->max_z<FFT_HEIGHT) )
380 puts("error: z < FFT_HEIGHT!");
381 puts("not writing bmp file ...");
387 sprintf(bmpfile,"x-z_%d.bmp",y);
391 size=(foo+(4-foo%4))*d3_l->max_z;
396 size=(foo+(4-foo%4))*FFT_HEIGHT;
397 end=d3_l->max_z-FFT_HEIGHT;
404 sprintf(bmpfile,"y-z_%d.bmp",x);
408 size=(foo+(4-foo%4))*d3_l->max_z;
413 size=(foo+(4-foo%4))*FFT_HEIGHT;
414 end=d3_l->max_z-FFT_HEIGHT;
421 sprintf(bmpfile,"x-y_%d.bmp",z);
423 size=(foo+(4-foo%4))*d3_l->max_y;
428 if((fd=open(bmpfile,O_WRONLY|O_CREAT))<0)
430 puts("cannot open bmp file");
435 buf[0]='B'; /* std header start */
437 buf[2]=(size+0x36)&0xff; /* file size */
438 buf[3]=(size+0x36)>>8;
440 buf[10]=0x36; /* offset to data */
442 buf[14]=0x28; /* length of bmp info header */
444 buf[18]=width&0xff; /* width and height */
450 buf[26]=1; /* # planes -> 1 */
452 buf[28]=24; /* bits per pixel -> 2^24 (true color) */
454 memset(buf+30,0,4); /* compression -> none */
455 buf[34]=size&0xff; /* data size */
458 buf[38]=0x12; /* res: pixel/meter */
464 memset(buf+46,0,8); /* no colors, no important colors */
466 if(write(fd,buf,54)<54)
468 puts("failed writing bmp header");
473 for(j=0;j<d3_l->max_z-end;j++)
475 for(i=0;i<d3_l->max_x;i++)
477 if(*(d3_l->status+i+y*d3_l->max_x+(d3_l->max_z-j-1)*d3_l->max_x*d3_l->max_y)&RED) memset(buf,0xff,3);
478 else memset(buf,0,3);
479 if(write(fd,buf,3)<3)
481 puts("failed writing rgb values to bmp file");
487 memset(buf,0,4-foo%4);
488 if(write(fd,buf,4-foo%4)<4-foo%4)
490 puts("failed writing 4 byte ending");
498 for(j=0;j<d3_l->max_z-end;j++)
500 for(i=0;i<d3_l->max_y;i++)
502 if(*(d3_l->status+x+i*d3_l->max_x+(d3_l->max_z-j-1)*d3_l->max_x*d3_l->max_y)&RED) memset(buf,0xff,3);
503 else memset(buf,0,3);
504 if(write(fd,buf,3)<3)
506 puts("failed writing rgb values to bmp file");
512 memset(buf,0,4-foo%4);
513 if(write(fd,buf,4-foo%4)<4-foo%4)
515 puts("failed writing 4 byte ending");
523 for(j=0;j<d3_l->max_y;j++)
525 for(i=0;i<d3_l->max_x;i++)
527 if(*(d3_l->status+i+(d3_l->max_y-j-1)*d3_l->max_x+z*d3_l->max_x*d3_l->max_y)&RED) memset(buf,0xff,3);
528 else memset(buf,0,3);
529 if(write(fd,buf,3)<3)
531 puts("failed writing rgb values to bmp file");
537 memset(buf,0,4-foo%4);
538 if(write(fd,buf,4-foo%4)<4-foo%4)
540 puts("failed writing 4 byte ending");
551 int save_to_file(char *sf,d3_lattice *d3_l,info *my_inf)
555 if((sf_fd=open(sf,O_WRONLY|O_CREAT))<0)
557 puts("cannot open save file");
560 if(write(sf_fd,d3_l,sizeof(d3_lattice))<sizeof(d3_lattice))
562 puts("failed saving d3 lattice struct");
565 if(write(sf_fd,my_inf,sizeof(info))<sizeof(info))
567 puts("failed saving info struct");
570 c=d3_l->max_x*d3_l->max_y*d3_l->max_z;
571 if(write(sf_fd,d3_l->status,c*sizeof(unsigned char))<c*sizeof(unsigned char))
573 puts("failed saving status of d3 lattice sites");
576 if(write(sf_fd,d3_l->extra,c*sizeof(int))<c*sizeof(int))
578 puts("failed saving sites concentration");
586 int load_from_file(char *lf,d3_lattice *d3_l,info *my_inf)
590 if((lf_fd=open(lf,O_RDONLY))<0)
592 puts("cannot open load file");
595 if(read(lf_fd,d3_l,sizeof(d3_lattice))<sizeof(d3_lattice))
597 puts("failed reading d3 lattice struct");
600 if(read(lf_fd,my_inf,sizeof(info))<sizeof(info))
602 puts("failed reading info struct");
605 c=d3_l->max_x*d3_l->max_y*d3_l->max_z;
606 if((d3_l->status=(unsigned char*)malloc(c*sizeof(unsigned char)))==NULL)
608 puts("cannot allocate status buffer");
611 if((d3_l->extra=(int *)malloc(c*sizeof(int)))==NULL)
613 puts("cannot allocate concentration buffer");
616 if(read(lf_fd,d3_l->status,c*sizeof(unsigned char))<c*sizeof(unsigned char))
618 puts("failed reading status of d3 lattice sites");
621 if(read(lf_fd,d3_l->extra,c*sizeof(int))<c*sizeof(int))
623 puts("failed reading sites concentration");
631 int convert_file(char *cf,d3_lattice *d3_l)
636 if((c_fd=open(cf,O_WRONLY|O_CREAT))<0)
638 puts("cannot open convert file");
641 dprintf(c_fd,"# created by nlsop (gnuplot format)\n");
642 for(x=0;x<d3_l->max_x;x++)
644 for(y=0;y<d3_l->max_y;y++)
646 for(z=0;z<d3_l->max_z;z++)
648 if(*(d3_l->status+x+y*d3_l->max_x+z*d3_l->max_x*d3_l->max_y)&AMORPH) dprintf(c_fd,"%d %d %d\n",x,y,z);
657 int get_c_ratio(double *c_ratio,char *pfile,info *my_info,d3_lattice *d3_l)
662 unsigned char buf[32];
666 if((p_fd=open(pfile,O_RDONLY))<0)
668 puts("cannot open profile file");
685 a=atof(p)/10; /* nm */
688 if(a>my_info->b_cd*CELL_LENGTH && a<(my_info->b_cd+d3_l->max_z)*CELL_LENGTH) d+=b;
698 u32 get_reject_graph(info *my_info,d3_lattice *d3_l,char *file,u32 *graph) {
707 if((fd=open(file,O_RDONLY))<0)
709 puts("cannot open file to calculate rejection graph");
712 if((flag=(unsigned char *)malloc(d3_l->max_z))==NULL)
714 puts("cannot malloc flag memory for rejection graph");
717 memset(flag,0,d3_l->max_z);
718 memset(graph,0,d3_l->max_z*sizeof(u32));
725 k=read(fd,&buf[i],1);
726 if((buf[i]=='\n')||(k==0)) break;
731 a=atof(p)/10; /* nm */
734 if(a>d3_l->max_z*CELL_LENGTH) k=0;
737 graph[(int)(a/CELL_LENGTH)]=(int)(URAND_MAX*b);
738 flag[(int)(a/CELL_LENGTH)]=1;
742 /* do (linear) interpolation here! */
750 while(flag[i]==0&&i<d3_l->max_z) i++;
751 for(k=j+1;k<i;k++) graph[k]=(int)((k-j)*((int)graph[i]-(int)graph[j])/(i-j))+graph[j];
752 if(graph[i]>max) max=graph[i];
757 // printf("debug: (interpolated c profile)\n");
758 // for(i=0;i<d3_l->max_z;i++) printf("%d %d\n",i,graph[i]);
763 int main(int argc,char **argv)
765 u32 x,y,z,x_c,y_c,z_c;
766 int i,j,quit,escape,switchmode,nowait,bmp,ac_distr;
769 char s_file[MAX_CHARS];
770 char s_file_tmp[MAX_CHARS];
771 char l_file[MAX_CHARS];
772 char c_file[MAX_CHARS];
773 char p_file[MAX_CHARS];
775 char r_file[MAX_CHARS];
777 char xyz_txt[MAX_TXT];
778 char status_txt[MAX_TXT];
779 char conc_txt[MAX_TXT];
780 char steps_txt[MAX_TXT];
781 char cc_txt[MAX_TXT];
784 char ap_txt[MAX_TXT];
785 char el_txt[MAX_TXT];
786 char cd_txt[MAX_TXT];
788 char cp_txt[MAX_TXT];
789 char zdiff_txt[MAX_TXT];
790 char diff_txt[MAX_TXT];
791 char dr_ac_txt[MAX_TXT];
792 char dr_cc_txt[MAX_TXT];
793 char dose_txt[MAX_TXT];
794 char mode_txt[MAX_TXT];
795 char *arg_v[MAX_ARGV];
827 my_info.diff_rate=DIFF_RATE;
837 strcpy(p_file,IMP_PROFILE);
857 my_info.a_el=atof(argv[++i]);
860 my_info.b_el=atof(argv[++i]);
863 d3_l.max_x=atoi(argv[++i]);
866 d3_l.max_y=atoi(argv[++i]);
869 d3_l.max_z=atoi(argv[++i]);
879 my_info.steps=atoi(argv[++i]);
882 refresh=atoi(argv[++i]);
885 my_info.range=atoi(argv[++i]);
888 my_info.a_ap=atof(argv[++i]);
891 my_info.b_ap=atof(argv[++i]);
894 my_info.a_cp=atof(argv[++i]);
897 my_info.a_cd=atof(argv[++i]);
900 my_info.b_cd=atof(argv[++i]);
903 resave=atoi(argv[++i]);
906 strcpy(l_file,argv[++i]);
907 if(i<argc-1) if(argv[i+1][0]!='-') strcpy(c_file,argv[++i]);
911 my_info.dr_ac=atof(argv[++i]);
914 my_info.dr_cc=atof(argv[++i]);
917 my_info.diff_rate=atoi(argv[++i]);
920 strcpy(l_file,argv[++i]);
923 strcpy(s_file,argv[++i]);
926 strcpy(r_file,argv[++i]);
929 strcpy(p_file,argv[++i]);
932 strcpy(l_file,argv[++i]);
933 if(i<argc-1) if(argv[i+1][0]!='-') c_step=atoi(argv[++i]);
936 my_info.cpi=atoi(argv[++i]);
950 if(!strcmp(s_file,""))
952 puts("NODFB defined, run with -S option");
957 if(!strcmp(r_file,"")) rand_init(NULL);
958 else rand_init(r_file);
960 if(!strcmp(l_file,""))
962 i=d3_l.max_x*d3_l.max_y*d3_l.max_z;
964 d3_lattice_init(&argc,argv,&d3_l);
966 if((d3_l.status=(unsigned char *)malloc(i*sizeof(unsigned char)))==NULL)
968 puts("failed allocating status buffer");
971 memset(d3_l.status,0,i*sizeof(unsigned char));
972 if((d3_l.extra=(int *)malloc(i*sizeof(int)))==NULL)
974 puts("failed allocating concentration buffer");
977 memset(d3_l.extra,0,i*sizeof(int));
980 load_from_file(l_file,&d3_l,&my_info);
983 if(!strcmp(c_file,"")) sprintf(c_file,"%s_gnuplot",l_file);
984 printf("converting file %s to %s\n",l_file,c_file);
985 convert_file(c_file,&d3_l);
990 else d3_lattice_init(&argc,argv,&d3_l);
995 d3_event_init(&d3_l);
999 strcpy(a_txt,"args:");
1000 sprintf(s_txt,"steps: %d",my_info.steps);
1001 sprintf(dose_txt,"dose: %.2fe+17 C/cm²",my_info.steps*1.0/(d3_l.max_x*d3_l.max_y*CELL_LENGTH*CELL_LENGTH*1000));
1002 sprintf(r_txt,"pressure range: %d",my_info.range);
1003 sprintf(ap_txt,"a_ap: %.4f b_ap: %.3f",my_info.a_ap,my_info.b_ap);
1004 sprintf(el_txt,"a_el: %.3f b_el: %.3f",my_info.a_el,my_info.b_el);
1005 sprintf(cd_txt,"a_cd: %.3f b_cd: %.3f",my_info.a_cd,my_info.b_cd);
1006 sprintf(cp_txt,"a_cp: %.5f",my_info.a_cp);
1007 sprintf(dr_ac_txt,"a/c diffusion rate: %.4f",my_info.dr_ac);
1008 if(my_info.c_diff!=0) sprintf(dr_cc_txt,"c/c diffusion rate: %.4f",my_info.dr_cc);
1009 else sprintf(dr_cc_txt,"c/c diffusion rate: none");
1010 sprintf(zdiff_txt,"diffusion in z direction: %c",my_info.z_diff?'y':'n');
1011 sprintf(diff_txt,"diffusion every %d steps",my_info.diff_rate);
1012 strcpy(mode_txt,"view: a/c mode");
1015 arg_v[3]=status_txt;
1024 arg_v[12]=zdiff_txt;
1036 arg_v[24]=dr_ac_txt;
1037 arg_v[25]=dr_cc_txt;
1040 if((!strcmp(l_file,""))||(c_step))
1042 /* calculate ratio of c_simwindow / c_total */
1043 if(get_c_ratio(&c_ratio,p_file,&my_info,&d3_l)!=1)
1045 puts("failed calculating ratio");
1048 /* compute graphs for random number rejection method */
1049 if((c_profile=(u32 *)malloc(d3_l.max_z*sizeof(unsigned int)))==NULL)
1051 puts("failed allocating memory for carbon profile graph");
1054 if((n_e_loss=(u32 *)malloc(d3_l.max_z*sizeof(unsigned int)))==NULL)
1056 puts("failed allocating memory for nuclear energy loss graph");
1059 ip_max=get_reject_graph(&my_info,&d3_l,p_file,c_profile);
1064 printf("%d\n",get_rand_reject(d3_l.max_z,ip_max,c_profile));
1068 i=(c_step?c_step:0);
1069 while((i<my_info.steps) && (quit==0) && (escape==0))
1071 for(j=0;j<my_info.cpi;j++)
1073 x_c=get_rand(d3_l.max_x);
1074 y_c=get_rand(d3_l.max_y);
1075 z_c=get_rand_lgp(d3_l.max_z,my_info.a_el,my_info.b_el);
1077 process_cell(&d3_l,x_c,y_c,z_c,&my_info);
1079 distrib_c(&d3_l,&my_info,i,c_ratio,ip_max,c_profile);
1083 sprintf(xyz_txt,"x: %d y: %d z: %d",x+1,y+1,z+1);
1084 sprintf(status_txt,"status: %c",(*(d3_l.status+x+y*d3_l.max_x+z*d3_l.max_x*d3_l.max_y)&AMORPH)?'a':'c');
1085 sprintf(conc_txt,"conc: %d",*(d3_l.extra+x+y*d3_l.max_x+z*d3_l.max_x*d3_l.max_y));
1086 sprintf(steps_txt,"step: %d",i);
1087 sprintf(cc_txt,"total c: %d",my_info.cc);
1088 d3_lattice_draw(&d3_l,x,y,z,25,arg_v,mode,0);
1091 if(i%resave==0 && strcmp(s_file,"") && resave!=0 && i!=0)
1093 sprintf(s_file_tmp,"%s_%d_of_%d",s_file,i,my_info.steps);
1094 save_to_file(s_file_tmp,&d3_l,&my_info);
1096 printf("saved %s\n",s_file_tmp);
1103 if(strcmp(s_file,""))
1105 printf("saved %s\n",s_file);
1106 save_to_file(s_file,&d3_l,&my_info);
1110 /* allocating buffer for pressure values */
1111 if((d3_l.v_ptr=malloc(d3_l.max_x*d3_l.max_y*d3_l.max_z*sizeof(unsigned char)))==NULL)
1113 puts("cannot allocate buffer for pressure values");
1117 calc_pressure(&d3_l,my_info.range);
1118 max_extra=calc_max_extra(&d3_l);
1120 while((quit==0) && (escape==0) && (nowait==0))
1123 if(switchmode==0) mode=0;
1124 if(switchmode==1) mode=1;
1125 if(switchmode==2) mode=2;
1127 sprintf(xyz_txt,"x: %d y: %d z: %d",x+1,y+1,z+1);
1128 sprintf(status_txt,"status: %c",(*(d3_l.status+x+y*d3_l.max_x+z*d3_l.max_x*d3_l.max_y)&AMORPH)?'a':'c');
1129 sprintf(conc_txt,"conc: %d",*(d3_l.extra+x+y*d3_l.max_x+z*d3_l.max_x*d3_l.max_y));
1130 sprintf(steps_txt,"step: end");
1131 sprintf(cc_txt,"total c: %d",my_info.cc);
1132 if(switchmode==0) strcpy(mode_txt,"view: a/c mode");
1133 if(switchmode==1) strcpy(mode_txt,"view: c conc mode");
1134 if(switchmode==2) strcpy(mode_txt,"view: a pressure mode");
1135 d3_lattice_draw(&d3_l,x,y,z,25,arg_v,mode,max_extra);
1138 scan_event(&d3_l,&x,&y,&z,&quit,&escape,&switchmode,&bmp,&ac_distr);
1139 if(bmp) write_bmp(&d3_l,bmp,x,y,z);
1140 if(ac_distr) write_ac_distr(&d3_l,ac_distr);
1143 d3_lattice_release(&d3_l);