From: hackbard Date: Wed, 22 Dec 2010 14:47:19 +0000 (+0100) Subject: basically finished bulk growth X-Git-Url: https://hackdaworld.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=8d59c1c0d63bd9732a6608dcd59e626e9ace9e6e;p=lectures%2Flatex.git basically finished bulk growth --- diff --git a/bibdb/bibdb.bib b/bibdb/bibdb.bib index 2ca9532..c0c26e9 100644 --- a/bibdb/bibdb.bib +++ b/bibdb/bibdb.bib @@ -3354,3 +3354,22 @@ notes = "comparison 6h 3c sic, cvd of 3c and 6h on single 6h substrate", } + +@Article{schulze98, + author = "N. Schulze and D. L. Barrett and G. Pensl", + collaboration = "", + title = "Near-equilibrium growth of micropipe-free 6{H}-Si{C} + single crystals by physical vapor transport", + publisher = "AIP", + year = "1998", + journal = "Applied Physics Letters", + volume = "72", + number = "13", + pages = "1632--1634", + keywords = "silicon compounds; semiconductor materials; + semiconductor growth; crystal growth from vapour; + photoluminescence; Hall mobility", + URL = "http://link.aip.org/link/?APL/72/1632/1", + doi = "10.1063/1.121136", + notes = "micropipe free 6h-sic pvt growth", +} diff --git a/posic/thesis/sic.tex b/posic/thesis/sic.tex index 9039f7d..b6e17d1 100644 --- a/posic/thesis/sic.tex +++ b/posic/thesis/sic.tex @@ -142,9 +142,13 @@ This refined versions of the physical vapor transport (PVT) technique enabled th Although significant advances have been achieved in the field of SiC bulk crystal growth, a variety of problems remain. The high temperatures required in PVT growth processes limit the range of materials used in the hot zones of the reactors, for which mainly graphite is used. -The porous material constitutes a severe source of contamination ... - -These defects include growth spirals (stepped screw dislocations), subgrain boundaries as well as micropipes (micron sized voids extending along the c axis of the crystal) in the hexagonal polytypes. +The porous material constitutes a severe source of contamination, e.g. with the dopants N, B and Al, which is exceptionally effective at low temperatures due to the low growth rate. +Since the vapor pressure of Si is much higher than that of C, a careful manipulation of the Si vapor content above the seed crystal is required. +Additionally, to preserve epitaxial growth conditions, graphitization of the seed crystal has to be avoided. +Avoiding defects constitutes a mojor difficulty. +These defects include growth spirals (stepped screw dislocations), subgrain boundaries and twins as well as micropipes (micron sized voids extending along the c axis of the crystal) and 3C inclusions at the seed crystal in hexagonal growth systems. +Micropipe-free growth of 6H-SiC has been realized by a reduction of the temperature gradient in the sublimation furnace resulting in near-equilibrium growth conditions in order to avoid stresses, which is, however, accompanied by a reduction of the growth rate \cite{schulze98}. +Further efforts have to be expended to find relations between the growth parameters, the kind of polytype and the occurrence and concentration of defects, which are of fundamental interest and might help to improve the purity of the bulk materials. \subsection{SiC epitaxial thin film growth}