#include <math.h>
#include "moldyn.h"
+#include "report/report.h"
int moldyn_init(t_moldyn *moldyn,int argc,char **argv) {
+ printf("[moldyn] init\n");
+
memset(moldyn,0,sizeof(t_moldyn));
rand_init(&(moldyn->random),NULL,1);
int moldyn_shutdown(t_moldyn *moldyn) {
printf("[moldyn] shutdown\n");
+
moldyn_log_shutdown(moldyn);
link_cell_shutdown(moldyn);
rand_close(&(moldyn->random));
int set_int_alg(t_moldyn *moldyn,u8 algo) {
+ printf("[moldyn] integration algorithm: ");
+
switch(algo) {
case MOLDYN_INTEGRATE_VERLET:
moldyn->integrate=velocity_verlet;
+ printf("velocity verlet\n");
break;
default:
printf("unknown integration algorithm: %02x\n",algo);
+ printf("unknown\n");
return -1;
}
moldyn->cutoff=cutoff;
+ printf("[moldyn] cutoff [A]: %f\n",moldyn->cutoff);
+
return 0;
}
moldyn->t_ref=t_ref;
+ printf("[moldyn] temperature [K]: %f\n",moldyn->t_ref);
+
return 0;
}
moldyn->p_ref=p_ref;
+ printf("[moldyn] pressure [bar]: %f\n",moldyn->p_ref/BAR);
+
return 0;
}
moldyn->t_tc=ttc;
moldyn->p_tc=ptc;
+ printf("[moldyn] p/t scaling:\n");
+
+ printf(" p: %s",ptype?"yes":"no ");
+ if(ptype)
+ printf(" | type: %02x | factor: %f",ptype,ptc);
+ printf("\n");
+
+ printf(" t: %s",ttype?"yes":"no ");
+ if(ttype)
+ printf(" | type: %02x | factor: %f",ttype,ttc);
+ printf("\n");
+
return 0;
}
moldyn->vis.dim.z=z;
}
+ moldyn->dv=0.000001*moldyn->volume;
+
printf("[moldyn] dimensions in A and A^3 respectively:\n");
printf(" x: %f\n",moldyn->dim.x);
printf(" y: %f\n",moldyn->dim.y);
printf(" z: %f\n",moldyn->dim.z);
printf(" volume: %f\n",moldyn->volume);
- printf(" visualize simulation box: %s\n",visualize?"on":"off");
+ printf(" visualize simulation box: %s\n",visualize?"yes":"no");
+ printf(" delta volume (pressure calc): %f\n",moldyn->dv);
return 0;
}
int set_pbc(t_moldyn *moldyn,u8 x,u8 y,u8 z) {
+ printf("[moldyn] periodic boundary conditions:\n");
+
if(x)
moldyn->status|=MOLDYN_STAT_PBX;
if(z)
moldyn->status|=MOLDYN_STAT_PBZ;
+ printf(" x: %s\n",x?"yes":"no");
+ printf(" y: %s\n",y?"yes":"no");
+ printf(" z: %s\n",z?"yes":"no");
+
return 0;
}
-int set_potential1b(t_moldyn *moldyn,pf_func1b func,void *params) {
+int set_potential1b(t_moldyn *moldyn,pf_func1b func) {
moldyn->func1b=func;
- moldyn->pot1b_params=params;
return 0;
}
-int set_potential2b(t_moldyn *moldyn,pf_func2b func,void *params) {
+int set_potential2b(t_moldyn *moldyn,pf_func2b func) {
moldyn->func2b=func;
- moldyn->pot2b_params=params;
return 0;
}
-int set_potential2b_post(t_moldyn *moldyn,pf_func2b_post func,void *params) {
+int set_potential3b_j1(t_moldyn *moldyn,pf_func2b func) {
+
+ moldyn->func3b_j1=func;
+
+ return 0;
+}
+
+int set_potential3b_j2(t_moldyn *moldyn,pf_func2b func) {
+
+ moldyn->func3b_j2=func;
+
+ return 0;
+}
+
+int set_potential3b_j3(t_moldyn *moldyn,pf_func2b func) {
+
+ moldyn->func3b_j3=func;
+
+ return 0;
+}
+
+int set_potential3b_k1(t_moldyn *moldyn,pf_func3b func) {
+
+ moldyn->func3b_k1=func;
+
+ return 0;
+}
+
+int set_potential3b_k2(t_moldyn *moldyn,pf_func3b func) {
- moldyn->func2b_post=func;
- moldyn->pot2b_params=params;
+ moldyn->func3b_k2=func;
return 0;
}
-int set_potential3b(t_moldyn *moldyn,pf_func3b func,void *params) {
+int set_potential_params(t_moldyn *moldyn,void *params) {
- moldyn->func3b=func;
- moldyn->pot3b_params=params;
+ moldyn->pot_params=params;
+
+ return 0;
+}
+
+int set_avg_skip(t_moldyn *moldyn,int skip) {
+
+ printf("[moldyn] skip %d steps before starting average calc\n",skip);
+ moldyn->avg_skip=skip;
return 0;
}
return 0;
}
+
+int moldyn_set_report(t_moldyn *moldyn,char *author,char *title) {
+
+ strncpy(moldyn->rauthor,author,63);
+ strncpy(moldyn->rtitle,title,63);
+
+ return 0;
+}
int moldyn_set_log(t_moldyn *moldyn,u8 type,int timer) {
char filename[128];
int ret;
+ printf("[moldyn] set log: ");
+
switch(type) {
case LOG_TOTAL_ENERGY:
moldyn->ewrite=timer;
return moldyn->efd;
}
dprintf(moldyn->efd,"# total energy log file\n");
+ printf("total energy (%d)\n",timer);
break;
case LOG_TOTAL_MOMENTUM:
moldyn->mwrite=timer;
return moldyn->mfd;
}
dprintf(moldyn->efd,"# total momentum log file\n");
+ printf("total momentum (%d)\n",timer);
+ break;
+ case LOG_PRESSURE:
+ moldyn->pwrite=timer;
+ snprintf(filename,127,"%s/pressure",moldyn->vlsdir);
+ moldyn->pfd=open(filename,
+ O_WRONLY|O_CREAT|O_EXCL,
+ S_IRUSR|S_IWUSR);
+ if(moldyn->pfd<0) {
+ perror("[moldyn] pressure log file\n");
+ return moldyn->pfd;
+ }
+ dprintf(moldyn->pfd,"# pressure log file\n");
+ printf("pressure (%d)\n",timer);
+ break;
+ case LOG_TEMPERATURE:
+ moldyn->twrite=timer;
+ snprintf(filename,127,"%s/temperature",moldyn->vlsdir);
+ moldyn->tfd=open(filename,
+ O_WRONLY|O_CREAT|O_EXCL,
+ S_IRUSR|S_IWUSR);
+ if(moldyn->tfd<0) {
+ perror("[moldyn] temperature log file\n");
+ return moldyn->tfd;
+ }
+ dprintf(moldyn->tfd,"# temperature log file\n");
+ printf("temperature (%d)\n",timer);
break;
case SAVE_STEP:
moldyn->swrite=timer;
+ printf("save file (%d)\n",timer);
break;
case VISUAL_STEP:
moldyn->vwrite=timer;
printf("[moldyn] visual init failure\n");
return ret;
}
+ printf("visual file (%d)\n",timer);
+ break;
+ case CREATE_REPORT:
+ snprintf(filename,127,"%s/report.tex",moldyn->vlsdir);
+ moldyn->rfd=open(filename,
+ O_WRONLY|O_CREAT|O_EXCL,
+ S_IRUSR|S_IWUSR);
+ if(moldyn->rfd<0) {
+ perror("[moldyn] report fd open");
+ return moldyn->rfd;
+ }
+ printf("report -> ");
+ if(moldyn->efd) {
+ snprintf(filename,127,"%s/e_plot.scr",
+ moldyn->vlsdir);
+ moldyn->epfd=open(filename,
+ O_WRONLY|O_CREAT|O_EXCL,
+ S_IRUSR|S_IWUSR);
+ if(moldyn->epfd<0) {
+ perror("[moldyn] energy plot fd open");
+ return moldyn->epfd;
+ }
+ dprintf(moldyn->epfd,e_plot_script);
+ close(moldyn->epfd);
+ printf("energy ");
+ }
+ if(moldyn->pfd) {
+ snprintf(filename,127,"%s/pressure_plot.scr",
+ moldyn->vlsdir);
+ moldyn->ppfd=open(filename,
+ O_WRONLY|O_CREAT|O_EXCL,
+ S_IRUSR|S_IWUSR);
+ if(moldyn->ppfd<0) {
+ perror("[moldyn] p plot fd open");
+ return moldyn->ppfd;
+ }
+ dprintf(moldyn->ppfd,pressure_plot_script);
+ close(moldyn->ppfd);
+ printf("pressure ");
+ }
+ if(moldyn->tfd) {
+ snprintf(filename,127,"%s/temperature_plot.scr",
+ moldyn->vlsdir);
+ moldyn->tpfd=open(filename,
+ O_WRONLY|O_CREAT|O_EXCL,
+ S_IRUSR|S_IWUSR);
+ if(moldyn->tpfd<0) {
+ perror("[moldyn] t plot fd open");
+ return moldyn->tpfd;
+ }
+ dprintf(moldyn->tpfd,temperature_plot_script);
+ close(moldyn->tpfd);
+ printf("temperature ");
+ }
+ dprintf(moldyn->rfd,report_start,
+ moldyn->rauthor,moldyn->rtitle);
+ printf("\n");
break;
default:
- printf("[moldyn] unknown log mechanism: %02x\n",type);
+ printf("unknown log type: %02x\n",type);
return -1;
}
int moldyn_log_shutdown(t_moldyn *moldyn) {
+ char sc[256];
+
printf("[moldyn] log shutdown\n");
- if(moldyn->efd) close(moldyn->efd);
+ if(moldyn->efd) {
+ close(moldyn->efd);
+ if(moldyn->rfd) {
+ dprintf(moldyn->rfd,report_energy);
+ snprintf(sc,255,"cd %s && gnuplot e_plot.scr",
+ moldyn->vlsdir);
+ system(sc);
+ }
+ }
if(moldyn->mfd) close(moldyn->mfd);
+ if(moldyn->pfd) {
+ close(moldyn->pfd);
+ if(moldyn->rfd)
+ dprintf(moldyn->rfd,report_pressure);
+ snprintf(sc,255,"cd %s && gnuplot pressure_plot.scr",
+ moldyn->vlsdir);
+ system(sc);
+ }
+ if(moldyn->tfd) {
+ close(moldyn->tfd);
+ if(moldyn->rfd)
+ dprintf(moldyn->rfd,report_temperature);
+ snprintf(sc,255,"cd %s && gnuplot temperature_plot.scr",
+ moldyn->vlsdir);
+ system(sc);
+ }
+ if(moldyn->rfd) {
+ dprintf(moldyn->rfd,report_end);
+ close(moldyn->rfd);
+ snprintf(sc,255,"cd %s && pdflatex report >/dev/null 2>&1",
+ moldyn->vlsdir);
+ system(sc);
+ snprintf(sc,255,"cd %s && pdflatex report >/dev/null 2>&1",
+ moldyn->vlsdir);
+ system(sc);
+ snprintf(sc,255,"cd %s && dvipdf report >/dev/null 2>&1",
+ moldyn->vlsdir);
+ system(sc);
+ }
if(&(moldyn->vis)) visual_tini(&(moldyn->vis));
return 0;
*/
int create_lattice(t_moldyn *moldyn,u8 type,double lc,int element,double mass,
- u8 attr,u8 brand,int a,int b,int c) {
+ u8 attr,u8 brand,int a,int b,int c,t_3dvec *origin) {
int new,count;
int ret;
- t_3dvec origin;
+ t_3dvec orig;
void *ptr;
t_atom *atom;
count=moldyn->count;
/* how many atoms do we expect */
+ if(type==CUBIC) new*=1;
if(type==FCC) new*=4;
if(type==DIAMOND) new*=8;
}
moldyn->atom=ptr;
atom=&(moldyn->atom[count]);
-
- v3_zero(&origin);
+
+ /* no atoms on the boundaries (only reason: it looks better!) */
+ if(!origin) {
+ orig.x=0.5*lc;
+ orig.y=0.5*lc;
+ orig.z=0.5*lc;
+ }
+ else {
+ orig.x=origin->x;
+ orig.y=origin->y;
+ orig.z=origin->z;
+ }
switch(type) {
+ case CUBIC:
+ set_nn_dist(moldyn,lc);
+ ret=cubic_init(a,b,c,lc,atom,&orig);
+ break;
case FCC:
- ret=fcc_init(a,b,c,lc,atom,&origin);
+ if(!origin)
+ v3_scale(&orig,&orig,0.5);
+ set_nn_dist(moldyn,0.5*sqrt(2.0)*lc);
+ ret=fcc_init(a,b,c,lc,atom,&orig);
break;
case DIAMOND:
- ret=diamond_init(a,b,c,lc,atom,&origin);
+ if(!origin)
+ v3_scale(&orig,&orig,0.25);
+ set_nn_dist(moldyn,0.25*sqrt(3.0)*lc);
+ ret=diamond_init(a,b,c,lc,atom,&orig);
break;
default:
printf("unknown lattice type (%02x)\n",type);
check_per_bound(moldyn,&(atom[ret].r));
}
+ /* update total system mass */
+ total_mass_calc(moldyn);
+
return ret;
}
+/* cubic init */
+int cubic_init(int a,int b,int c,double lc,t_atom *atom,t_3dvec *origin) {
+
+ int count;
+ t_3dvec r;
+ int i,j,k;
+ t_3dvec o;
+
+ count=0;
+ if(origin)
+ v3_copy(&o,origin);
+ else
+ v3_zero(&o);
+
+ r.x=o.x;
+ for(i=0;i<a;i++) {
+ r.y=o.y;
+ for(j=0;j<b;j++) {
+ r.z=o.z;
+ for(k=0;k<c;k++) {
+ v3_copy(&(atom[count].r),&r);
+ count+=1;
+ r.z+=lc;
+ }
+ r.y+=lc;
+ }
+ r.x+=lc;
+ }
+
+ for(i=0;i<count;i++) {
+ atom[i].r.x-=(a*lc)/2.0;
+ atom[i].r.y-=(b*lc)/2.0;
+ atom[i].r.z-=(c*lc)/2.0;
+ }
+
+ return count;
+}
+
/* fcc lattice init */
int fcc_init(int a,int b,int c,double lc,t_atom *atom,t_3dvec *origin) {
int count;
- int i,j;
+ int i,j,k,l;
t_3dvec o,r,n;
t_3dvec basis[3];
- double help[3];
- double x,y,z;
-
- x=a*lc;
- y=b*lc;
- z=c*lc;
- if(origin) v3_copy(&o,origin);
- else v3_zero(&o);
+ count=0;
+ if(origin)
+ v3_copy(&o,origin);
+ else
+ v3_zero(&o);
/* construct the basis */
- for(i=0;i<3;i++) {
- for(j=0;j<3;j++) {
- if(i!=j) help[j]=0.5*lc;
- else help[j]=.0;
- }
- v3_set(&basis[i],help);
- }
+ memset(basis,0,3*sizeof(t_3dvec));
+ basis[0].x=0.5*lc;
+ basis[0].y=0.5*lc;
+ basis[1].x=0.5*lc;
+ basis[1].z=0.5*lc;
+ basis[2].y=0.5*lc;
+ basis[2].z=0.5*lc;
- v3_zero(&r);
- count=0;
-
/* fill up the room */
r.x=o.x;
- while(r.x<x) {
+ for(i=0;i<a;i++) {
r.y=o.y;
- while(r.y<y) {
+ for(j=0;j<b;j++) {
r.z=o.z;
- while(r.z<z) {
+ for(k=0;k<c;k++) {
+ /* first atom */
v3_copy(&(atom[count].r),&r);
- atom[count].element=1;
count+=1;
- for(i=0;i<3;i++) {
- v3_add(&n,&r,&basis[i]);
- if((n.x<x+o.x)&&
- (n.y<y+o.y)&&
- (n.z<z+o.z)) {
- v3_copy(&(atom[count].r),&n);
- count+=1;
- }
+ r.z+=lc;
+ /* the three face centered atoms */
+ for(l=0;l<3;l++) {
+ v3_add(&n,&r,&basis[l]);
+ v3_copy(&(atom[count].r),&n);
+ count+=1;
}
- r.z+=lc;
}
r.y+=lc;
}
r.x+=lc;
}
-
+
/* coordinate transformation */
- help[0]=x/2.0;
- help[1]=y/2.0;
- help[2]=z/2.0;
- v3_set(&n,help);
- for(i=0;i<count;i++)
- v3_sub(&(atom[i].r),&(atom[i].r),&n);
-
+ for(i=0;i<count;i++) {
+ atom[i].r.x-=(a*lc)/2.0;
+ atom[i].r.y-=(b*lc)/2.0;
+ atom[i].r.z-=(c*lc)/2.0;
+ }
+
return count;
}
atom[count].tag=count;
atom[count].attr=attr;
+ /* update total system mass */
+ total_mass_calc(moldyn);
+
return 0;
}
atom=moldyn->atom;
random=&(moldyn->random);
+ printf("[moldyn] thermal init (equi init: %s)\n",equi_init?"yes":"no");
+
/* gaussian distribution of velocities */
v3_zero(&p_total);
for(i=0;i<moldyn->count;i++) {
return 0;
}
+double total_mass_calc(t_moldyn *moldyn) {
+
+ int i;
+
+ moldyn->mass=0.0;
+
+ for(i=0;i<moldyn->count;i++)
+ moldyn->mass+=moldyn->atom[i].mass;
+
+ return moldyn->mass;
+}
+
+double temperature_calc(t_moldyn *moldyn) {
+
+ /* assume up to date kinetic energy, which is 3/2 N k_B T */
+
+ moldyn->t=(2.0*moldyn->ekin)/(3.0*K_BOLTZMANN*moldyn->count);
+
+ return moldyn->t;
+}
+
+double get_temperature(t_moldyn *moldyn) {
+
+ return moldyn->t;
+}
+
int scale_velocity(t_moldyn *moldyn,u8 equi_init) {
int i;
count=0;
for(i=0;i<moldyn->count;i++) {
if((equi_init&TRUE)||(atom[i].attr&ATOM_ATTR_HB)) {
- e+=0.5*atom[i].mass*v3_absolute_square(&(atom[i].v));
+ e+=atom[i].mass*v3_absolute_square(&(atom[i].v));
count+=1;
}
}
+ e*=0.5;
if(count!=0) moldyn->t=e/(1.5*count*K_BOLTZMANN);
else return 0; /* no atoms involved in scaling! */
return 0;
}
+double ideal_gas_law_pressure(t_moldyn *moldyn) {
+
+ double p;
+
+ p=moldyn->count*moldyn->t*K_BOLTZMANN/moldyn->volume;
+
+ return p;
+}
+
+double virial_sum(t_moldyn *moldyn) {
+
+ int i;
+ double v;
+ t_virial *virial;
+
+ /* virial (sum over atom virials) */
+ v=0.0;
+ for(i=0;i<moldyn->count;i++) {
+ virial=&(moldyn->atom[i].virial);
+ v+=(virial->xx+virial->yy+virial->zz);
+ }
+ moldyn->virial=v;
+
+ /* global virial (absolute coordinates) */
+ virial=&(moldyn->gvir);
+ moldyn->gv=virial->xx+virial->yy+virial->zz;
+
+ return moldyn->virial;
+}
+
+double pressure_calc(t_moldyn *moldyn) {
+
+ /*
+ * PV = NkT + <W>
+ * with W = 1/3 sum_i f_i r_i (- skipped!)
+ * virial = sum_i f_i r_i
+ *
+ * => P = (2 Ekin + virial) / (3V)
+ */
+
+ /* assume up to date virial & up to date kinetic energy */
+
+ /* pressure (atom virials) */
+ moldyn->p=2.0*moldyn->ekin+moldyn->virial;
+ moldyn->p/=(3.0*moldyn->volume);
+
+ /* pressure (absolute coordinates) */
+ moldyn->gp=2.0*moldyn->ekin+moldyn->gv;
+ moldyn->gp/=(3.0*moldyn->volume);
+
+ return moldyn->p;
+}
+
+int average_and_fluctuation_calc(t_moldyn *moldyn) {
+
+ if(moldyn->total_steps<moldyn->avg_skip)
+ return 0;
+
+ int denom=moldyn->total_steps+1-moldyn->avg_skip;
+
+ /* assume up to date energies, temperature, pressure etc */
+
+ /* kinetic energy */
+ moldyn->k_sum+=moldyn->ekin;
+ moldyn->k2_sum+=(moldyn->ekin*moldyn->ekin);
+ moldyn->k_avg=moldyn->k_sum/denom;
+ moldyn->k2_avg=moldyn->k2_sum/denom;
+ moldyn->dk2_avg=moldyn->k2_avg-(moldyn->k_avg*moldyn->k_avg);
+
+ /* potential energy */
+ moldyn->v_sum+=moldyn->energy;
+ moldyn->v2_sum+=(moldyn->energy*moldyn->energy);
+ moldyn->v_avg=moldyn->v_sum/denom;
+ moldyn->v2_avg=moldyn->v2_sum/denom;
+ moldyn->dv2_avg=moldyn->v2_avg-(moldyn->v_avg*moldyn->v_avg);
+
+ /* temperature */
+ moldyn->t_sum+=moldyn->t;
+ moldyn->t_avg=moldyn->t_sum/denom;
+
+ /* virial */
+ moldyn->virial_sum+=moldyn->virial;
+ moldyn->virial_avg=moldyn->virial_sum/denom;
+ moldyn->gv_sum+=moldyn->gv;
+ moldyn->gv_avg=moldyn->gv_sum/denom;
+
+ /* pressure */
+ moldyn->p_sum+=moldyn->p;
+ moldyn->p_avg=moldyn->p_sum/denom;
+ moldyn->gp_sum+=moldyn->gp;
+ moldyn->gp_avg=moldyn->gp_sum/denom;
+
+ return 0;
+}
+
+int get_heat_capacity(t_moldyn *moldyn) {
+
+ double temp2,ighc;
+
+ /* averages needed for heat capacity calc */
+ if(moldyn->total_steps<moldyn->avg_skip)
+ return 0;
+
+ /* (temperature average)^2 */
+ temp2=moldyn->t_avg*moldyn->t_avg;
+ printf("[moldyn] specific heat capacity for T=%f K [J/(kg K)]\n",
+ moldyn->t_avg);
+
+ /* ideal gas contribution */
+ ighc=3.0*moldyn->count*K_BOLTZMANN/2.0;
+ printf(" ideal gas contribution: %f\n",
+ ighc/moldyn->mass*KILOGRAM/JOULE);
+
+ /* specific heat for nvt ensemble */
+ moldyn->c_v_nvt=moldyn->dv2_avg/(K_BOLTZMANN*temp2)+ighc;
+ moldyn->c_v_nvt/=moldyn->mass;
+
+ /* specific heat for nve ensemble */
+ moldyn->c_v_nve=ighc/(1.0-(moldyn->dv2_avg/(ighc*K_BOLTZMANN*temp2)));
+ moldyn->c_v_nve/=moldyn->mass;
+
+ printf(" NVE: %f\n",moldyn->c_v_nve*KILOGRAM/JOULE);
+ printf(" NVT: %f\n",moldyn->c_v_nvt*KILOGRAM/JOULE);
+printf(" --> <dV2> sim: %f experimental: %f\n",moldyn->dv2_avg,1.5*moldyn->count*K_B2*moldyn->t_avg*moldyn->t_avg*(1.0-1.5*moldyn->count*K_BOLTZMANN/(700*moldyn->mass*JOULE/KILOGRAM)));
+
+ return 0;
+}
+
+double thermodynamic_pressure_calc(t_moldyn *moldyn) {
+
+ t_3dvec dim,*tp;
+ double u_up,u_down,dv;
+ double scale,p;
+ t_atom *store;
+
+ /*
+ * dU = - p dV
+ *
+ * => p = - dU/dV
+ *
+ */
+
+ scale=0.00001;
+ dv=8*scale*scale*scale*moldyn->volume;
+
+ store=malloc(moldyn->count*sizeof(t_atom));
+ if(store==NULL) {
+ printf("[moldyn] allocating store mem failed\n");
+ return -1;
+ }
+
+ /* save unscaled potential energy + atom/dim configuration */
+ memcpy(store,moldyn->atom,moldyn->count*sizeof(t_atom));
+ dim=moldyn->dim;
+
+ /* scale up dimension and atom positions */
+ scale_dim(moldyn,SCALE_UP,scale,TRUE,TRUE,TRUE);
+ scale_atoms(moldyn,SCALE_UP,scale,TRUE,TRUE,TRUE);
+ link_cell_shutdown(moldyn);
+ link_cell_init(moldyn,QUIET);
+ potential_force_calc(moldyn);
+ u_up=moldyn->energy;
+
+ /* restore atomic configuration + dim */
+ memcpy(moldyn->atom,store,moldyn->count*sizeof(t_atom));
+ moldyn->dim=dim;
+
+ /* scale down dimension and atom positions */
+ scale_dim(moldyn,SCALE_DOWN,scale,TRUE,TRUE,TRUE);
+ scale_atoms(moldyn,SCALE_DOWN,scale,TRUE,TRUE,TRUE);
+ link_cell_shutdown(moldyn);
+ link_cell_init(moldyn,QUIET);
+ potential_force_calc(moldyn);
+ u_down=moldyn->energy;
+
+ /* calculate pressure */
+ p=-(u_up-u_down)/dv;
+printf("-------> %.10f %.10f %f\n",u_up/EV/moldyn->count,u_down/EV/moldyn->count,p/BAR);
+
+ /* restore atomic configuration + dim */
+ memcpy(moldyn->atom,store,moldyn->count*sizeof(t_atom));
+ moldyn->dim=dim;
+
+ /* restore energy */
+ potential_force_calc(moldyn);
+
+ link_cell_shutdown(moldyn);
+ link_cell_init(moldyn,QUIET);
+
+ return p;
+}
+
+double get_pressure(t_moldyn *moldyn) {
+
+ return moldyn->p;
+
+}
+
+int scale_dim(t_moldyn *moldyn,u8 dir,double scale,u8 x,u8 y,u8 z) {
+
+ t_3dvec *dim;
+
+ dim=&(moldyn->dim);
+
+ if(dir==SCALE_UP)
+ scale=1.0+scale;
+
+ if(dir==SCALE_DOWN)
+ scale=1.0-scale;
+
+ if(x) dim->x*=scale;
+ if(y) dim->y*=scale;
+ if(z) dim->z*=scale;
+
+ return 0;
+}
+
+int scale_atoms(t_moldyn *moldyn,u8 dir,double scale,u8 x,u8 y,u8 z) {
+
+ int i;
+ t_3dvec *r;
+
+ if(dir==SCALE_UP)
+ scale=1.0+scale;
+
+ if(dir==SCALE_DOWN)
+ scale=1.0-scale;
+
+ for(i=0;i<moldyn->count;i++) {
+ r=&(moldyn->atom[i].r);
+ if(x) r->x*=scale;
+ if(y) r->y*=scale;
+ if(z) r->z*=scale;
+ }
+
+ return 0;
+}
+
int scale_volume(t_moldyn *moldyn) {
- t_atom *atom;
t_3dvec *dim,*vdim;
- double scale,v;
- t_virial virial;
+ double scale;
t_linkcell *lc;
- int i;
- atom=moldyn->atom;
- dim=&(moldyn->dim);
vdim=&(moldyn->vis.dim);
+ dim=&(moldyn->dim);
lc=&(moldyn->lc);
- memset(&virial,0,sizeof(t_virial));
+ /* scaling factor */
+ if(moldyn->pt_scale&P_SCALE_BERENDSEN) {
+ scale=1.0-(moldyn->p_ref-moldyn->p)/moldyn->p_tc;
+ scale=pow(scale,ONE_THIRD);
+ }
+ else {
+ scale=pow(moldyn->p/moldyn->p_ref,ONE_THIRD);
+ }
+moldyn->debug=scale;
+
+ /* scale the atoms and dimensions */
+ scale_atoms(moldyn,SCALE_DIRECT,scale,TRUE,TRUE,TRUE);
+ scale_dim(moldyn,SCALE_DIRECT,scale,TRUE,TRUE,TRUE);
- for(i=0;i<moldyn->count;i++) {
- virial.xx+=atom[i].virial.xx;
- virial.yy+=atom[i].virial.yy;
- virial.zz+=atom[i].virial.zz;
- virial.xy+=atom[i].virial.xy;
- virial.xz+=atom[i].virial.xz;
- virial.yz+=atom[i].virial.yz;
+ /* visualize dimensions */
+ if(vdim->x!=0) {
+ vdim->x=dim->x;
+ vdim->y=dim->y;
+ vdim->z=dim->z;
}
- /* just a guess so far ... */
- v=virial.xx+virial.yy+virial.zz;
-
-printf("%f\n",v);
- /* get pressure from virial */
- moldyn->p=moldyn->count*K_BOLTZMANN*moldyn->t+ONE_THIRD*v;
- moldyn->p/=moldyn->volume;
-printf("%f | %f\n",moldyn->p/(ATM),moldyn->p_ref/ATM);
-
- /* scale factor */
- if(moldyn->pt_scale&P_SCALE_BERENDSEN)
- scale=3*sqrt(1-(moldyn->p_ref-moldyn->p)/moldyn->p_tc);
- else
- /* should actually never be used */
- scale=pow(moldyn->p/moldyn->p_ref,1.0/3.0);
-
-printf("scale = %f\n",scale);
- /* actual scaling */
- dim->x*=scale;
- dim->y*=scale;
- dim->z*=scale;
- if(vdim->x) vdim->x=dim->x;
- if(vdim->y) vdim->y=dim->y;
- if(vdim->z) vdim->z=dim->z;
- moldyn->volume*=(scale*scale*scale);
-
- /* check whether we need a new linkcell init */
- if((dim->x/moldyn->cutoff!=lc->nx)||
- (dim->y/moldyn->cutoff!=lc->ny)||
- (dim->z/moldyn->cutoff!=lc->nx)) {
+ /* recalculate scaled volume */
+ moldyn->volume=dim->x*dim->y*dim->z;
+
+ /* adjust/reinit linkcell */
+ if(((int)(dim->x/moldyn->cutoff)!=lc->nx)||
+ ((int)(dim->y/moldyn->cutoff)!=lc->ny)||
+ ((int)(dim->z/moldyn->cutoff)!=lc->nx)) {
link_cell_shutdown(moldyn);
- link_cell_init(moldyn);
+ link_cell_init(moldyn,QUIET);
+ } else {
+ lc->x*=scale;
+ lc->y*=scale;
+ lc->z*=scale;
}
return 0;
}
-double get_e_kin(t_moldyn *moldyn) {
+double e_kin_calc(t_moldyn *moldyn) {
int i;
t_atom *atom;
return moldyn->ekin;
}
-double get_e_pot(t_moldyn *moldyn) {
-
- return moldyn->energy;
-}
-
-double update_e_kin(t_moldyn *moldyn) {
-
- return(get_e_kin(moldyn));
-}
-
double get_total_energy(t_moldyn *moldyn) {
return(moldyn->ekin+moldyn->energy);
/* linked list / cell method */
-int link_cell_init(t_moldyn *moldyn) {
+int link_cell_init(t_moldyn *moldyn,u8 vol) {
t_linkcell *lc;
int i;
lc->cells=lc->nx*lc->ny*lc->nz;
lc->subcell=malloc(lc->cells*sizeof(t_list));
- printf("[moldyn] initializing linked cells (%d)\n",lc->cells);
+ if(lc->cells<27)
+ printf("[moldyn] FATAL: less then 27 subcells!\n");
+
+ if(vol) {
+ printf("[moldyn] initializing linked cells (%d)\n",lc->cells);
+ printf(" x: %d x %f A\n",lc->nx,lc->x);
+ printf(" y: %d x %f A\n",lc->ny,lc->y);
+ printf(" z: %d x %f A\n",lc->nz,lc->z);
+ }
for(i=0;i<lc->cells;i++)
list_init_f(&(lc->subcell[i]));
i=((atom[count].r.x+(moldyn->dim.x/2))/lc->x);
j=((atom[count].r.y+(moldyn->dim.y/2))/lc->y);
k=((atom[count].r.z+(moldyn->dim.z/2))/lc->z);
- list_add_immediate_f(&(moldyn->lc.subcell[i+j*nx+k*nx*ny]),
+ list_add_immediate_f(&(lc->subcell[i+j*nx+k*nx*ny]),
&(atom[count]));
}
schedule->tau=ptr;
schedule->tau[count-1]=tau;
+ printf("[moldyn] schedule added:\n");
+ printf(" number: %d | runs: %d | tau: %f\n",count-1,runs,tau);
+
+
return 0;
}
-int moldyn_set_schedule_hook(t_moldyn *moldyn,void *hook,void *hook_params) {
+int moldyn_set_schedule_hook(t_moldyn *moldyn,set_hook hook,void *hook_params) {
moldyn->schedule.hook=hook;
moldyn->schedule.hook_params=hook_params;
int moldyn_integrate(t_moldyn *moldyn) {
int i;
- unsigned int e,m,s,v;
- t_3dvec p;
+ unsigned int e,m,s,v,p,t;
+ t_3dvec momentum;
t_moldyn_schedule *sched;
t_atom *atom;
int fd;
char dir[128];
double ds;
+ double energy_scale;
+ //double tp;
sched=&(moldyn->schedule);
atom=moldyn->atom;
/* initialize linked cell method */
- link_cell_init(moldyn);
+ link_cell_init(moldyn,VERBOSE);
/* logging & visualization */
e=moldyn->ewrite;
m=moldyn->mwrite;
s=moldyn->swrite;
v=moldyn->vwrite;
+ p=moldyn->pwrite;
+ t=moldyn->twrite;
/* sqaure of some variables */
moldyn->tau_square=moldyn->tau*moldyn->tau;
moldyn->cutoff_square=moldyn->cutoff*moldyn->cutoff;
+ /* energy scaling factor */
+ energy_scale=moldyn->count*EV;
+
/* calculate initial forces */
potential_force_calc(moldyn);
+#ifdef DEBUG
+return 0;
+#endif
/* some stupid checks before we actually start calculating bullshit */
if(moldyn->cutoff>0.5*moldyn->dim.x)
/* zero absolute time */
moldyn->time=0.0;
+ moldyn->total_steps=0;
/* debugging, ignore */
moldyn->debug=0;
+ /* tell the world */
+ printf("[moldyn] integration start, go get a coffee ...\n");
+
/* executing the schedule */
- for(sched->count=0;sched->count<sched->total_sched;sched->count++) {
+ sched->count=0;
+ while(sched->count<sched->total_sched) {
/* setting amount of runs and finite time step size */
moldyn->tau=sched->tau[sched->count];
/* integration step */
moldyn->integrate(moldyn);
+ /* calculate kinetic energy, temperature and pressure */
+ e_kin_calc(moldyn);
+ temperature_calc(moldyn);
+ virial_sum(moldyn);
+ pressure_calc(moldyn);
+ average_and_fluctuation_calc(moldyn);
+
/* p/t scaling */
if(moldyn->pt_scale&(T_SCALE_BERENDSEN|T_SCALE_DIRECT))
scale_velocity(moldyn,FALSE);
if(!(i%e))
dprintf(moldyn->efd,
"%f %f %f %f\n",
- moldyn->time,update_e_kin(moldyn),
- moldyn->energy,
- get_total_energy(moldyn));
+ moldyn->time,moldyn->ekin/energy_scale,
+ moldyn->energy/energy_scale,
+ get_total_energy(moldyn)/energy_scale);
}
if(m) {
if(!(i%m)) {
- p=get_total_p(moldyn);
+ momentum=get_total_p(moldyn);
dprintf(moldyn->mfd,
- "%f %f\n",moldyn->time,v3_norm(&p));
+ "%f %f %f %f %f\n",moldyn->time,
+ momentum.x,momentum.y,momentum.z,
+ v3_norm(&momentum));
+ }
+ }
+ if(p) {
+ if(!(i%p)) {
+ dprintf(moldyn->pfd,
+ "%f %f %f %f %f\n",moldyn->time,
+ moldyn->p/BAR,moldyn->p_avg/BAR,
+ moldyn->gp/BAR,moldyn->gp_avg/BAR);
+ }
+ }
+ if(t) {
+ if(!(i%t)) {
+ dprintf(moldyn->tfd,
+ "%f %f %f\n",
+ moldyn->time,moldyn->t,moldyn->t_avg);
}
}
if(s) {
if(!(i%v)) {
visual_atoms(&(moldyn->vis),moldyn->time,
moldyn->atom,moldyn->count);
- printf("\rsched: %d, steps: %d, debug: %d",
- sched->count,i,moldyn->debug);
- fflush(stdout);
}
}
+ /* display progress */
+ if(!(i%10)) {
+ printf("\rsched:%d, steps:%d, T:%3.1f/%3.1f P:%4.1f/%4.1f V:%6.1f",
+ sched->count,i,
+ moldyn->t,moldyn->t_avg,
+ moldyn->p_avg/BAR,moldyn->p/BAR,
+ moldyn->volume);
+ fflush(stdout);
+ }
+
/* increase absolute time */
moldyn->time+=moldyn->tau;
+ moldyn->total_steps+=1;
}
/* check for hooks */
- if(sched->hook)
+ if(sched->hook) {
+ printf("\n ## schedule hook %d/%d start ##\n",
+ sched->count+1,sched->total_sched-1);
sched->hook(moldyn,sched->hook_params);
+ printf(" ## schedule hook end ##\n");
+ }
- /* get a new info line */
- printf("\n");
+ /* increase the schedule counter */
+ sched->count+=1;
}
int velocity_verlet(t_moldyn *moldyn) {
int i,count;
- double tau,tau_square;
+ double tau,tau_square,h;
t_3dvec delta;
t_atom *atom;
for(i=0;i<count;i++) {
/* new positions */
+ h=0.5/atom[i].mass;
v3_scale(&delta,&(atom[i].v),tau);
v3_add(&(atom[i].r),&(atom[i].r),&delta);
- v3_scale(&delta,&(atom[i].f),0.5*tau_square/atom[i].mass);
+ v3_scale(&delta,&(atom[i].f),h*tau_square);
v3_add(&(atom[i].r),&(atom[i].r),&delta);
check_per_bound(moldyn,&(atom[i].r));
- /* velocities */
- v3_scale(&delta,&(atom[i].f),0.5*tau/atom[i].mass);
+ /* velocities [actually v(t+tau/2)] */
+ v3_scale(&delta,&(atom[i].f),h*tau);
v3_add(&(atom[i].v),&(atom[i].v),&delta);
}
potential_force_calc(moldyn);
for(i=0;i<count;i++) {
- /* again velocities */
+ /* again velocities [actually v(t+tau)] */
v3_scale(&delta,&(atom[i].f),0.5*tau/atom[i].mass);
v3_add(&(atom[i].v),&(atom[i].v),&delta);
}
/*
*
- * potentials & corresponding forces
+ * potentials & corresponding forces & virial routine
*
*/
/* reset energy */
moldyn->energy=0.0;
-
- /* get energy and force of every atom */
+
+ /* reset global virial */
+ memset(&(moldyn->gvir),0,sizeof(t_virial));
+
+ /* reset force, site energy and virial of every atom */
for(i=0;i<count;i++) {
/* reset force */
v3_zero(&(itom[i].f));
- /* reset viral of atom i */
- virial=&(itom[i].virial);
+ /* reset virial */
+ virial=(&(itom[i].virial));
virial->xx=0.0;
virial->yy=0.0;
virial->zz=0.0;
virial->xy=0.0;
virial->xz=0.0;
virial->yz=0.0;
-
+
/* reset site energy */
itom[i].e=0.0;
+ }
+
+ /* get energy, force and virial of every atom */
+
+ /* first (and only) loop over atoms i */
+ for(i=0;i<count;i++) {
+
/* single particle potential/force */
if(itom[i].attr&ATOM_ATTR_1BP)
- moldyn->func1b(moldyn,&(itom[i]));
+ if(moldyn->func1b)
+ moldyn->func1b(moldyn,&(itom[i]));
if(!(itom[i].attr&(ATOM_ATTR_2BP|ATOM_ATTR_3BP)))
continue;
dnlc=lc->dnlc;
+ /* first loop over atoms j */
+ if(moldyn->func2b) {
+ for(j=0;j<27;j++) {
+
+ this=&(neighbour_i[j]);
+ list_reset_f(this);
+
+ if(this->start==NULL)
+ continue;
+
+ bc_ij=(j<dnlc)?0:1;
+
+ do {
+ jtom=this->current->data;
+
+ if(jtom==&(itom[i]))
+ continue;
+
+ if((jtom->attr&ATOM_ATTR_2BP)&
+ (itom[i].attr&ATOM_ATTR_2BP)) {
+ moldyn->func2b(moldyn,
+ &(itom[i]),
+ jtom,
+ bc_ij);
+ }
+ } while(list_next_f(this)!=L_NO_NEXT_ELEMENT);
+
+ }
+ }
+
+ /* 3 body potential/force */
+
+ if(!(itom[i].attr&ATOM_ATTR_3BP))
+ continue;
+
+ /* copy the neighbour lists */
+ memcpy(neighbour_i2,neighbour_i,27*sizeof(t_list));
+
+ /* second loop over atoms j */
for(j=0;j<27;j++) {
this=&(neighbour_i[j]);
if(jtom==&(itom[i]))
continue;
- if((jtom->attr&ATOM_ATTR_2BP)&
- (itom[i].attr&ATOM_ATTR_2BP)) {
- moldyn->func2b(moldyn,
- &(itom[i]),
- jtom,
- bc_ij);
- }
+ if(!(jtom->attr&ATOM_ATTR_3BP))
+ continue;
- /* 3 body potential/force */
+ /* reset 3bp run */
+ moldyn->run3bp=1;
- if(!(itom[i].attr&ATOM_ATTR_3BP)||
- !(jtom->attr&ATOM_ATTR_3BP))
- continue;
+ if(moldyn->func3b_j1)
+ moldyn->func3b_j1(moldyn,
+ &(itom[i]),
+ jtom,
+ bc_ij);
- /* copy the neighbour lists */
- memcpy(neighbour_i2,neighbour_i,
- 27*sizeof(t_list));
+ /* in first j loop, 3bp run can be skipped */
+ if(!(moldyn->run3bp))
+ continue;
+
+ /* first loop over atoms k */
+ if(moldyn->func3b_k1) {
- /* get neighbours of i */
for(k=0;k<27;k++) {
that=&(neighbour_i2[k]);
if(ktom==&(itom[i]))
continue;
- moldyn->func3b(moldyn,
- &(itom[i]),
- jtom,
- ktom,
- bc_ik|bc_ij);
+ moldyn->func3b_k1(moldyn,
+ &(itom[i]),
+ jtom,
+ ktom,
+ bc_ik|bc_ij);
} while(list_next_f(that)!=\
L_NO_NEXT_ELEMENT);
}
- /* 2bp post function */
- if(moldyn->func2b_post) {
- moldyn->func2b_post(moldyn,
- &(itom[i]),
- jtom,bc_ij);
}
-
- } while(list_next_f(this)!=L_NO_NEXT_ELEMENT);
-
- }
-
- }
-#ifdef DEBUG
-printf("\n\n");
-#endif
-#ifdef VDEBUG
-printf("\n\n");
-#endif
-
- return 0;
-}
-
-/*
- * periodic boundayr checking
- */
-
-inline int check_per_bound(t_moldyn *moldyn,t_3dvec *a) {
-
- double x,y,z;
- t_3dvec *dim;
-
- dim=&(moldyn->dim);
-
- x=dim->x/2;
- y=dim->y/2;
- z=dim->z/2;
-
- if(moldyn->status&MOLDYN_STAT_PBX) {
- if(a->x>=x) a->x-=dim->x;
- else if(-a->x>x) a->x+=dim->x;
- }
- if(moldyn->status&MOLDYN_STAT_PBY) {
- if(a->y>=y) a->y-=dim->y;
- else if(-a->y>y) a->y+=dim->y;
- }
- if(moldyn->status&MOLDYN_STAT_PBZ) {
- if(a->z>=z) a->z-=dim->z;
- else if(-a->z>z) a->z+=dim->z;
- }
-
- return 0;
-}
-
-
-/*
- * example potentials
- */
-
-/* harmonic oscillator potential and force */
-
-int harmonic_oscillator(t_moldyn *moldyn,t_atom *ai,t_atom *aj,u8 bc) {
-
- t_ho_params *params;
- t_3dvec force,distance;
- double d;
- double sc,equi_dist;
-
- params=moldyn->pot2b_params;
- sc=params->spring_constant;
- equi_dist=params->equilibrium_distance;
-
- v3_sub(&distance,&(aj->r),&(ai->r));
-
- if(bc) check_per_bound(moldyn,&distance);
- d=v3_norm(&distance);
- if(d<=moldyn->cutoff) {
- /* energy is 1/2 (d-d0)^2, but we will add this twice ... */
- moldyn->energy+=(0.25*sc*(d-equi_dist)*(d-equi_dist));
- /* f = -grad E; grad r_ij = -1 1/r_ij distance */
- v3_scale(&force,&distance,sc*(1.0-(equi_dist/d)));
- v3_add(&(ai->f),&(ai->f),&force);
- }
-
- return 0;
-}
-
-/* lennard jones potential & force for one sort of atoms */
-
-int lennard_jones(t_moldyn *moldyn,t_atom *ai,t_atom *aj,u8 bc) {
-
- t_lj_params *params;
- t_3dvec force,distance;
- double d,h1,h2;
- double eps,sig6,sig12;
-
- params=moldyn->pot2b_params;
- eps=params->epsilon4;
- sig6=params->sigma6;
- sig12=params->sigma12;
-
- v3_sub(&distance,&(aj->r),&(ai->r));
- if(bc) check_per_bound(moldyn,&distance);
- d=v3_absolute_square(&distance); /* 1/r^2 */
- if(d<=moldyn->cutoff_square) {
- d=1.0/d; /* 1/r^2 */
- h2=d*d; /* 1/r^4 */
- h2*=d; /* 1/r^6 */
- h1=h2*h2; /* 1/r^12 */
- /* energy is eps*..., but we will add this twice ... */
- moldyn->energy+=0.5*eps*(sig12*h1-sig6*h2);
- h2*=d; /* 1/r^8 */
- h1*=d; /* 1/r^14 */
- h2*=6*sig6;
- h1*=12*sig12;
- d=+h1-h2;
- d*=eps;
- v3_scale(&force,&distance,-1.0*d); /* f = - grad E */
- v3_add(&(ai->f),&(ai->f),&force);
- }
-
- return 0;
-}
-
-/*
- * tersoff potential & force for 2 sorts of atoms
- */
-
-/* create mixed terms from parameters and set them */
-int tersoff_mult_complete_params(t_tersoff_mult_params *p) {
-
- printf("[moldyn] tersoff parameter completion\n");
- p->S2[0]=p->S[0]*p->S[0];
- p->S2[1]=p->S[1]*p->S[1];
- p->Smixed=sqrt(p->S[0]*p->S[1]);
- p->S2mixed=p->Smixed*p->Smixed;
- p->Rmixed=sqrt(p->R[0]*p->R[1]);
- p->Amixed=sqrt(p->A[0]*p->A[1]);
- p->Bmixed=sqrt(p->B[0]*p->B[1]);
- p->lambda_m=0.5*(p->lambda[0]+p->lambda[1]);
- p->mu_m=0.5*(p->mu[0]+p->mu[1]);
-
- printf("[moldyn] tersoff mult parameter info:\n");
- printf(" S (A) | %f | %f | %f\n",p->S[0],p->S[1],p->Smixed);
- printf(" R (A) | %f | %f | %f\n",p->R[0],p->R[1],p->Rmixed);
- printf(" A (eV) | %f | %f | %f\n",p->A[0]/EV,p->A[1]/EV,p->Amixed/EV);
- printf(" B (eV) | %f | %f | %f\n",p->B[0]/EV,p->B[1]/EV,p->Bmixed/EV);
- printf(" lambda | %f | %f | %f\n",p->lambda[0],p->lambda[1],
- p->lambda_m);
- printf(" mu | %f | %f | %f\n",p->mu[0],p->mu[1],p->mu_m);
- printf(" beta | %.10f | %.10f\n",p->beta[0],p->beta[1]);
- printf(" n | %f | %f\n",p->n[0],p->n[1]);
- printf(" c | %f | %f\n",p->c[0],p->c[1]);
- printf(" d | %f | %f\n",p->d[0],p->d[1]);
- printf(" h | %f | %f\n",p->h[0],p->h[1]);
- printf(" chi | %f \n",p->chi);
-
- return 0;
-}
-/* tersoff 1 body part */
-int tersoff_mult_1bp(t_moldyn *moldyn,t_atom *ai) {
+ if(moldyn->func3b_j2)
+ moldyn->func3b_j2(moldyn,
+ &(itom[i]),
+ jtom,
+ bc_ij);
- int brand;
- t_tersoff_mult_params *params;
- t_tersoff_exchange *exchange;
-
- brand=ai->brand;
- params=moldyn->pot1b_params;
- exchange=&(params->exchange);
+ /* second loop over atoms k */
+ if(moldyn->func3b_k2) {
- /*
- * simple: point constant parameters only depending on atom i to
- * their right values
- */
+ for(k=0;k<27;k++) {
- exchange->beta_i=&(params->beta[brand]);
- exchange->n_i=&(params->n[brand]);
- exchange->c_i=&(params->c[brand]);
- exchange->d_i=&(params->d[brand]);
- exchange->h_i=&(params->h[brand]);
+ that=&(neighbour_i2[k]);
+ list_reset_f(that);
+
+ if(that->start==NULL)
+ continue;
- exchange->betaini=pow(*(exchange->beta_i),*(exchange->n_i));
- exchange->ci2=params->c[brand]*params->c[brand];
- exchange->di2=params->d[brand]*params->d[brand];
- exchange->ci2di2=exchange->ci2/exchange->di2;
+ bc_ik=(k<dnlc)?0:1;
- return 0;
-}
-
-/* tersoff 2 body part */
-int tersoff_mult_2bp(t_moldyn *moldyn,t_atom *ai,t_atom *aj,u8 bc) {
-
- t_tersoff_mult_params *params;
- t_tersoff_exchange *exchange;
- t_3dvec dist_ij,force;
- double d_ij,d_ij2;
- double A,B,R,S,S2,lambda,mu;
- double f_r,df_r;
- double f_c,df_c;
- int brand;
- double s_r;
- double arg;
-
- params=moldyn->pot2b_params;
- brand=aj->brand;
- exchange=&(params->exchange);
-
- /* clear 3bp and 2bp post run */
- exchange->run3bp=0;
- exchange->run2bp_post=0;
-
- /* reset S > r > R mark */
- exchange->d_ij_between_rs=0;
-
- /*
- * calc of 2bp contribution of V_ij and dV_ij/ji
- *
- * for Vij and dV_ij we need:
- * - f_c_ij, df_c_ij
- * - f_r_ij, df_r_ij
- *
- * for dV_ji we need:
- * - f_c_ji = f_c_ij, df_c_ji = df_c_ij
- * - f_r_ji = f_r_ij; df_r_ji = df_r_ij
- *
- */
+ do {
- /* constants */
- if(brand==ai->brand) {
- S=params->S[brand];
- S2=params->S2[brand];
- R=params->R[brand];
- A=params->A[brand];
- B=params->B[brand];
- lambda=params->lambda[brand];
- mu=params->mu[brand];
- exchange->chi=1.0;
- }
- else {
- S=params->Smixed;
- S2=params->S2mixed;
- R=params->Rmixed;
- A=params->Amixed;
- B=params->Bmixed;
- lambda=params->lambda_m;
- mu=params->mu_m;
- params->exchange.chi=params->chi;
- }
+ ktom=that->current->data;
- /* dist_ij, d_ij */
- v3_sub(&dist_ij,&(aj->r),&(ai->r));
- if(bc) check_per_bound(moldyn,&dist_ij);
- d_ij2=v3_absolute_square(&dist_ij);
+ if(!(ktom->attr&ATOM_ATTR_3BP))
+ continue;
- /* if d_ij2 > S2 => no force & potential energy contribution */
- if(d_ij2>S2)
- return 0;
+ if(ktom==jtom)
+ continue;
- /* now we will need the distance */
- //d_ij=v3_norm(&dist_ij);
- d_ij=sqrt(d_ij2);
-
- /* save for use in 3bp */
- exchange->d_ij=d_ij;
- exchange->d_ij2=d_ij2;
- exchange->dist_ij=dist_ij;
-
- /* more constants */
- exchange->beta_j=&(params->beta[brand]);
- exchange->n_j=&(params->n[brand]);
- exchange->c_j=&(params->c[brand]);
- exchange->d_j=&(params->d[brand]);
- exchange->h_j=&(params->h[brand]);
- if(brand==ai->brand) {
- exchange->betajnj=exchange->betaini;
- exchange->cj2=exchange->ci2;
- exchange->dj2=exchange->di2;
- exchange->cj2dj2=exchange->ci2di2;
- }
- else {
- exchange->betajnj=pow(*(exchange->beta_j),*(exchange->n_j));
- exchange->cj2=params->c[brand]*params->c[brand];
- exchange->dj2=params->d[brand]*params->d[brand];
- exchange->cj2dj2=exchange->cj2/exchange->dj2;
- }
+ if(ktom==&(itom[i]))
+ continue;
- /* f_r_ij = f_r_ji, df_r_ij = df_r_ji */
- f_r=A*exp(-lambda*d_ij);
- df_r=lambda*f_r/d_ij;
-
- /* f_a, df_a calc (again, same for ij and ji) | save for later use! */
- exchange->f_a=-B*exp(-mu*d_ij);
- exchange->df_a=mu*exchange->f_a/d_ij;
-
- /* f_c, df_c calc (again, same for ij and ji) */
- if(d_ij<R) {
- /* f_c = 1, df_c = 0 */
- f_c=1.0;
- df_c=0.0;
- /* two body contribution (ij, ji) */
- v3_scale(&force,&dist_ij,-df_r);
- }
- else {
- s_r=S-R;
- arg=M_PI*(d_ij-R)/s_r;
- f_c=0.5+0.5*cos(arg);
- df_c=0.5*sin(arg)*(M_PI/(s_r*d_ij));
- /* two body contribution (ij, ji) */
- v3_scale(&force,&dist_ij,-df_c*f_r-df_r*f_c);
- /* tell 3bp that S > r > R */
- exchange->d_ij_between_rs=1;
- }
+ moldyn->func3b_k2(moldyn,
+ &(itom[i]),
+ jtom,
+ ktom,
+ bc_ik|bc_ij);
- /* add forces of 2bp (ij, ji) contribution
- * dVij = dVji and we sum up both: no 1/2) */
- v3_add(&(ai->f),&(ai->f),&force);
+ } while(list_next_f(that)!=\
+ L_NO_NEXT_ELEMENT);
- /* virial */
- ai->virial.xx-=force.x*dist_ij.x;
- ai->virial.yy-=force.y*dist_ij.y;
- ai->virial.zz-=force.z*dist_ij.z;
- ai->virial.xy-=force.x*dist_ij.y;
- ai->virial.xz-=force.x*dist_ij.z;
- ai->virial.yz-=force.y*dist_ij.z;
+ }
+
+ }
+ /* 2bp post function */
+ if(moldyn->func3b_j3) {
+ moldyn->func3b_j3(moldyn,
+ &(itom[i]),
+ jtom,bc_ij);
+ }
+
+ } while(list_next_f(this)!=L_NO_NEXT_ELEMENT);
+
+ }
+
#ifdef DEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVij, dVji (2bp) contrib:\n");
- printf("%f | %f\n",force.x,ai->f.x);
- printf("%f | %f\n",force.y,ai->f.y);
- printf("%f | %f\n",force.z,ai->f.z);
-}
+ //printf("\n\n");
#endif
#ifdef VDEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVij, dVji (2bp) contrib:\n");
- printf("%f | %f\n",force.x*dist_ij.x,ai->virial.xx);
- printf("%f | %f\n",force.y*dist_ij.y,ai->virial.yy);
- printf("%f | %f\n",force.z*dist_ij.z,ai->virial.zz);
-}
+ printf("\n\n");
#endif
- /* energy 2bp contribution (ij, ji) is 0.5 f_r f_c ... */
- moldyn->energy+=(0.5*f_r*f_c);
-
- /* save for use in 3bp */
- exchange->f_c=f_c;
- exchange->df_c=df_c;
-
- /* enable the run of 3bp function and 2bp post processing */
- exchange->run3bp=1;
- exchange->run2bp_post=1;
-
- /* reset 3bp sums */
- exchange->zeta_ij=0.0;
- exchange->zeta_ji=0.0;
- v3_zero(&(exchange->dzeta_ij));
- v3_zero(&(exchange->dzeta_ji));
-
- return 0;
-}
-
-/* tersoff 2 body post part */
-
-int tersoff_mult_post_2bp(t_moldyn *moldyn,t_atom *ai,t_atom *aj,u8 bc) {
-
- /*
- * here we have to allow for the 3bp sums
- *
- * that is:
- * - zeta_ij, dzeta_ij
- * - zeta_ji, dzeta_ji
- *
- * to compute the 3bp contribution to:
- * - Vij, dVij
- * - dVji
- *
- */
-
- t_tersoff_mult_params *params;
- t_tersoff_exchange *exchange;
-
- t_3dvec force,temp;
- t_3dvec *dist_ij;
- double b,db,tmp;
- double f_c,df_c,f_a,df_a;
- double chi,ni,betaini,nj,betajnj;
- double zeta;
-
- params=moldyn->pot2b_params;
- exchange=&(params->exchange);
-
- /* we do not run if f_c_ij was detected to be 0! */
- if(!(exchange->run2bp_post))
- return 0;
-
- f_c=exchange->f_c;
- df_c=exchange->df_c;
- f_a=exchange->f_a;
- df_a=exchange->df_a;
- betaini=exchange->betaini;
- betajnj=exchange->betajnj;
- ni=*(exchange->n_i);
- nj=*(exchange->n_j);
- chi=exchange->chi;
- dist_ij=&(exchange->dist_ij);
-
- /* Vij and dVij */
- zeta=exchange->zeta_ij;
- if(zeta==0.0) {
- moldyn->debug++; /* just for debugging ... */
- db=0.0;
- b=chi;
- v3_scale(&force,dist_ij,df_a*b*f_c);
}
- else {
- tmp=betaini*pow(zeta,ni-1.0); /* beta^n * zeta^n-1 */
- b=(1+zeta*tmp); /* 1 + beta^n zeta^n */
- db=chi*pow(b,-1.0/(2*ni)-1); /* x(...)^(-1/2n - 1) */
- b=db*b; /* b_ij */
- db*=-0.5*tmp; /* db_ij */
- v3_scale(&force,&(exchange->dzeta_ij),f_a*db);
- v3_scale(&temp,dist_ij,df_a*b);
- v3_add(&force,&force,&temp);
- v3_scale(&force,&force,f_c);
- }
- v3_scale(&temp,dist_ij,df_c*b*f_a);
- v3_add(&force,&force,&temp);
- v3_scale(&force,&force,-0.5);
-
- /* add force */
- v3_add(&(ai->f),&(ai->f),&force);
-
- /* virial */
- ai->virial.xx-=force.x*dist_ij->x;
- ai->virial.yy-=force.y*dist_ij->y;
- ai->virial.zz-=force.z*dist_ij->z;
- ai->virial.xy-=force.x*dist_ij->y;
- ai->virial.xz-=force.x*dist_ij->z;
- ai->virial.yz-=force.y*dist_ij->z;
#ifdef DEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVij (3bp) contrib:\n");
- printf("%f | %f\n",force.x,ai->f.x);
- printf("%f | %f\n",force.y,ai->f.y);
- printf("%f | %f\n",force.z,ai->f.z);
-}
+ printf("\nATOM 0: %f %f %f\n\n",itom->f.x,itom->f.y,itom->f.z);
#endif
-#ifdef VDEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVij (3bp) contrib:\n");
- printf("%f | %f\n",force.x*dist_ij->x,ai->virial.xx);
- printf("%f | %f\n",force.y*dist_ij->y,ai->virial.yy);
- printf("%f | %f\n",force.z*dist_ij->z,ai->virial.zz);
-}
-#endif
-
- /* add energy of 3bp sum */
- moldyn->energy+=(0.5*f_c*b*f_a);
- /* dVji */
- zeta=exchange->zeta_ji;
- if(zeta==0.0) {
- moldyn->debug++;
- b=chi;
- v3_scale(&force,dist_ij,df_a*b*f_c);
- }
- else {
- tmp=betajnj*pow(zeta,nj-1.0); /* beta^n * zeta^n-1 */
- b=(1+zeta*tmp); /* 1 + beta^n zeta^n */
- db=chi*pow(b,-1.0/(2*nj)-1); /* x(...)^(-1/2n - 1) */
- b=db*b; /* b_ij */
- db*=-0.5*tmp; /* db_ij */
- v3_scale(&force,&(exchange->dzeta_ji),f_a*db);
- v3_scale(&temp,dist_ij,df_a*b);
- v3_add(&force,&force,&temp);
- v3_scale(&force,&force,f_c);
+ /* calculate global virial */
+ for(i=0;i<count;i++) {
+ moldyn->gvir.xx+=moldyn->atom[i].r.x*moldyn->atom[i].f.x;
+ moldyn->gvir.yy+=moldyn->atom[i].r.y*moldyn->atom[i].f.y;
+ moldyn->gvir.zz+=moldyn->atom[i].r.z*moldyn->atom[i].f.z;
+ moldyn->gvir.xy+=moldyn->atom[i].r.y*moldyn->atom[i].f.x;
+ moldyn->gvir.xz+=moldyn->atom[i].r.z*moldyn->atom[i].f.x;
+ moldyn->gvir.yz+=moldyn->atom[i].r.z*moldyn->atom[i].f.y;
}
- v3_scale(&temp,dist_ij,df_c*b*f_a);
- v3_add(&force,&force,&temp);
- v3_scale(&force,&force,-0.5);
-
- /* add force */
- v3_add(&(ai->f),&(ai->f),&force);
-
- /* virial - plus sign, as dist_ij = - dist_ji - (really??) */
- ai->virial.xx+=force.x*dist_ij->x;
- ai->virial.yy+=force.y*dist_ij->y;
- ai->virial.zz+=force.z*dist_ij->z;
- ai->virial.xy+=force.x*dist_ij->y;
- ai->virial.xz+=force.x*dist_ij->z;
- ai->virial.yz+=force.y*dist_ij->z;
-
-#ifdef DEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVji (3bp) contrib:\n");
- printf("%f | %f\n",force.x,ai->f.x);
- printf("%f | %f\n",force.y,ai->f.y);
- printf("%f | %f\n",force.z,ai->f.z);
-}
-#endif
-#ifdef VDEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVji (3bp) contrib:\n");
- printf("%f | %f\n",force.x*dist_ij->x,ai->virial.xx);
- printf("%f | %f\n",force.y*dist_ij->y,ai->virial.yy);
- printf("%f | %f\n",force.z*dist_ij->z,ai->virial.zz);
-}
-#endif
return 0;
}
-/* tersoff 3 body part */
-
-int tersoff_mult_3bp(t_moldyn *moldyn,t_atom *ai,t_atom *aj,t_atom *ak,u8 bc) {
-
- t_tersoff_mult_params *params;
- t_tersoff_exchange *exchange;
- t_3dvec dist_ij,dist_ik,dist_jk;
- t_3dvec temp1,temp2;
- t_3dvec *dzeta;
- double R,S,S2,s_r;
- double B,mu;
- double d_ij,d_ik,d_jk,d_ij2,d_ik2,d_jk2;
- double rr,dd;
- double f_c,df_c;
- double f_c_ik,df_c_ik,arg;
- double f_c_jk;
- double n,c,d,h;
- double c2,d2,c2d2;
- double cos_theta,d_costheta1,d_costheta2;
- double h_cos,d2_h_cos2;
- double frac,g,zeta,chi;
- double tmp;
- int brand;
-
- params=moldyn->pot3b_params;
- exchange=&(params->exchange);
-
- if(!(exchange->run3bp))
- return 0;
-
- /*
- * calc of 3bp contribution of V_ij and dV_ij/ji/jk &
- * 2bp contribution of dV_jk
- *
- * for Vij and dV_ij we still need:
- * - b_ij, db_ij (zeta_ij)
- * - f_c_ik, df_c_ik, constants_i, cos_theta_ijk, d_costheta_ijk
- *
- * for dV_ji we still need:
- * - b_ji, db_ji (zeta_ji)
- * - f_c_jk, d_c_jk, constants_j, cos_theta_jik, d_costheta_jik
- *
- * for dV_jk we need:
- * - f_c_jk
- * - f_a_jk
- * - db_jk (zeta_jk)
- * - f_c_ji, df_c_ji, constants_j, cos_theta_jki, d_costheta_jki
- *
- */
-
- /*
- * get exchange data
- */
+/*
+ * virial calculation
+ */
- /* dist_ij, d_ij - this is < S_ij ! */
- dist_ij=exchange->dist_ij;
- d_ij=exchange->d_ij;
- d_ij2=exchange->d_ij2;
+//inline int virial_calc(t_atom *a,t_3dvec *f,t_3dvec *d) {
+int virial_calc(t_atom *a,t_3dvec *f,t_3dvec *d) {
- /* f_c_ij, df_c_ij (same for ji) */
- f_c=exchange->f_c;
- df_c=exchange->df_c;
+ a->virial.xx+=f->x*d->x;
+ a->virial.yy+=f->y*d->y;
+ a->virial.zz+=f->z*d->z;
+ a->virial.xy+=f->x*d->y;
+ a->virial.xz+=f->x*d->z;
+ a->virial.yz+=f->y*d->z;
- /*
- * calculate unknown values now ...
- */
+ return 0;
+}
- /* V_ij and dV_ij stuff (in b_ij there is f_c_ik) */
+/*
+ * periodic boundary checking
+ */
- /* dist_ik, d_ik */
- v3_sub(&dist_ik,&(ak->r),&(ai->r));
- if(bc) check_per_bound(moldyn,&dist_ik);
- d_ik2=v3_absolute_square(&dist_ik);
+//inline int check_per_bound(t_moldyn *moldyn,t_3dvec *a) {
+int check_per_bound(t_moldyn *moldyn,t_3dvec *a) {
+
+ double x,y,z;
+ t_3dvec *dim;
- /* ik constants */
- brand=ai->brand;
- if(brand==ak->brand) {
- R=params->R[brand];
- S=params->S[brand];
- S2=params->S2[brand];
- }
- else {
- R=params->Rmixed;
- S=params->Smixed;
- S2=params->S2mixed;
- }
+ dim=&(moldyn->dim);
- /* zeta_ij/dzeta_ij contribution only for d_ik < S */
- if(d_ik2<S2) {
-
- /* now we need d_ik */
- d_ik=sqrt(d_ik2);
-
- /* get constants_i from exchange data */
- n=*(exchange->n_i);
- c=*(exchange->c_i);
- d=*(exchange->d_i);
- h=*(exchange->h_i);
- c2=exchange->ci2;
- d2=exchange->di2;
- c2d2=exchange->ci2di2;
-
- /* cosine of theta_ijk by scalaproduct */
- rr=v3_scalar_product(&dist_ij,&dist_ik);
- dd=d_ij*d_ik;
- cos_theta=rr/dd;
-
- /* d_costheta */
- tmp=1.0/dd;
- d_costheta1=cos_theta/d_ij2-tmp;
- d_costheta2=cos_theta/d_ik2-tmp;
-
- /* some usefull values */
- h_cos=(h-cos_theta);
- d2_h_cos2=d2+(h_cos*h_cos);
- frac=c2/(d2_h_cos2);
-
- /* g(cos_theta) */
- g=1.0+c2d2-frac;
-
- /* d_costheta_ij and dg(cos_theta) - needed in any case! */
- v3_scale(&temp1,&dist_ij,d_costheta1);
- v3_scale(&temp2,&dist_ik,d_costheta2);
- v3_add(&temp1,&temp1,&temp2);
- v3_scale(&temp1,&temp1,-2.0*frac*h_cos/d2_h_cos2); /* dg */
-
- /* f_c_ik & df_c_ik + {d,}zeta contribution */
- dzeta=&(exchange->dzeta_ij);
- if(d_ik<R) {
- /* {d,}f_c_ik */
- // => f_c_ik=1.0;
- // => df_c_ik=0.0; of course we do not set this!
-
- /* zeta_ij */
- exchange->zeta_ij+=g;
-
- /* dzeta_ij */
- v3_add(dzeta,dzeta,&temp1);
- }
- else {
- /* {d,}f_c_ik */
- s_r=S-R;
- arg=M_PI*(d_ik-R)/s_r;
- f_c_ik=0.5+0.5*cos(arg);
- df_c_ik=0.5*sin(arg)*(M_PI/(s_r*d_ik));
-
- /* zeta_ij */
- exchange->zeta_ij+=f_c_ik*g;
-
- /* dzeta_ij */
- v3_scale(&temp1,&temp1,f_c_ik);
- v3_scale(&temp2,&dist_ik,g*df_c_ik);
- v3_add(&temp1,&temp1,&temp2);
- v3_add(dzeta,dzeta,&temp1);
- }
- }
+ x=dim->x/2;
+ y=dim->y/2;
+ z=dim->z/2;
- /* dV_ji stuff (in b_ji there is f_c_jk) + dV_jk stuff! */
-
- /* dist_jk, d_jk */
- v3_sub(&dist_jk,&(ak->r),&(aj->r));
- if(bc) check_per_bound(moldyn,&dist_jk);
- d_jk2=v3_absolute_square(&dist_jk);
-
- /* jk constants */
- brand=aj->brand;
- if(brand==ak->brand) {
- R=params->R[brand];
- S=params->S[brand];
- S2=params->S2[brand];
- B=params->B[brand];
- mu=params->mu[brand];
- chi=1.0;
+ if(moldyn->status&MOLDYN_STAT_PBX) {
+ if(a->x>=x) a->x-=dim->x;
+ else if(-a->x>x) a->x+=dim->x;
}
- else {
- R=params->Rmixed;
- S=params->Smixed;
- S2=params->S2mixed;
- B=params->Bmixed;
- mu=params->mu_m;
- chi=params->chi;
+ if(moldyn->status&MOLDYN_STAT_PBY) {
+ if(a->y>=y) a->y-=dim->y;
+ else if(-a->y>y) a->y+=dim->y;
}
-
- /* zeta_ji/dzeta_ji contribution only for d_jk < S_jk */
- if(d_jk2<S2) {
-
- /* now we need d_ik */
- d_jk=sqrt(d_jk2);
-
- /* constants_j from exchange data */
- n=*(exchange->n_j);
- c=*(exchange->c_j);
- d=*(exchange->d_j);
- h=*(exchange->h_j);
- c2=exchange->cj2;
- d2=exchange->dj2;
- c2d2=exchange->cj2dj2;
-
- /* cosine of theta_jik by scalaproduct */
- rr=-v3_scalar_product(&dist_ij,&dist_jk); /* -1, as ij -> ji */
- dd=d_ij*d_jk;
- cos_theta=rr/dd;
-
- /* d_costheta */
- d_costheta1=1.0/dd;
- d_costheta2=cos_theta/d_ij2;
-
- /* some usefull values */
- h_cos=(h-cos_theta);
- d2_h_cos2=d2+(h_cos*h_cos);
- frac=c2/(d2_h_cos2);
-
- /* g(cos_theta) */
- g=1.0+c2d2-frac;
-
- /* d_costheta_jik and dg(cos_theta) - needed in any case! */
- v3_scale(&temp1,&dist_jk,d_costheta1);
- v3_scale(&temp2,&dist_ij,-d_costheta2); /* ji -> ij => -1 */
- //v3_add(&temp1,&temp1,&temp2);
- v3_sub(&temp1,&temp1,&temp2); /* there is a minus! */
- v3_scale(&temp1,&temp1,-2.0*frac*h_cos/d2_h_cos2); /* dg */
-
- /* store dg in temp2 and use it for dVjk later */
- v3_copy(&temp2,&temp1);
-
- /* f_c_jk + {d,}zeta contribution (df_c_jk = 0) */
- dzeta=&(exchange->dzeta_ji);
- if(d_jk<R) {
- /* f_c_jk */
- f_c_jk=1.0;
-
- /* zeta_ji */
- exchange->zeta_ji+=g;
-
- /* dzeta_ji */
- v3_add(dzeta,dzeta,&temp1);
- }
- else {
- /* f_c_jk */
- s_r=S-R;
- arg=M_PI*(d_jk-R)/s_r;
- f_c_jk=0.5+0.5*cos(arg);
-
- /* zeta_ji */
- exchange->zeta_ji+=f_c_jk*g;
-
- /* dzeta_ji */
- v3_scale(&temp1,&temp1,f_c_jk);
- v3_add(dzeta,dzeta,&temp1);
- }
-
- /* dV_jk stuff | add force contribution on atom i immediately */
- if(exchange->d_ij_between_rs) {
- zeta=f_c*g;
- v3_scale(&temp1,&temp2,f_c);
- v3_scale(&temp2,&dist_ij,df_c*g);
- v3_add(&temp2,&temp2,&temp1); /* -> dzeta_jk in temp2 */
- }
- else {
- zeta=g;
- // dzeta_jk is simply dg, which is stored in temp2
- }
- /* betajnj * zeta_jk ^ nj-1 */
- tmp=exchange->betajnj*pow(zeta,(n-1.0));
- tmp=-chi/2.0*pow((1+tmp*zeta),(-1.0/(2.0*n)-1))*tmp;
- v3_scale(&temp2,&temp2,tmp*B*exp(-mu*d_jk)*f_c_jk*0.5);
- v3_add(&(ai->f),&(ai->f),&temp2); /* -1 skipped in f_a calc ^ */
- /* scaled with 0.5 ^ */
-
- /* virial */
- ai->virial.xx-=temp2.x*dist_jk.x;
- ai->virial.yy-=temp2.y*dist_jk.y;
- ai->virial.zz-=temp2.z*dist_jk.z;
- ai->virial.xy-=temp2.x*dist_jk.y;
- ai->virial.xz-=temp2.x*dist_jk.z;
- ai->virial.yz-=temp2.y*dist_jk.z;
-
-#ifdef DEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVjk (3bp) contrib:\n");
- printf("%f | %f\n",temp2.x,ai->f.x);
- printf("%f | %f\n",temp2.y,ai->f.y);
- printf("%f | %f\n",temp2.z,ai->f.z);
-}
-#endif
-#ifdef VDEBUG
-if(ai==&(moldyn->atom[0])) {
- printf("dVjk (3bp) contrib:\n");
- printf("%f | %f\n",temp2.x*dist_jk.x,ai->virial.xx);
- printf("%f | %f\n",temp2.y*dist_jk.y,ai->virial.yy);
- printf("%f | %f\n",temp2.z*dist_jk.z,ai->virial.zz);
-}
-#endif
-
+ if(moldyn->status&MOLDYN_STAT_PBZ) {
+ if(a->z>=z) a->z-=dim->z;
+ else if(-a->z>z) a->z+=dim->z;
}
return 0;
}
-
-
+
/*
* debugging / critical check functions
*/
return 0;
}
+
+/*
+ * post processing functions
+ */
+
+int get_line(int fd,char *line,int max) {
+
+ int count,ret;
+
+ count=0;
+
+ while(1) {
+ if(count==max) return count;
+ ret=read(fd,line+count,1);
+ if(ret<=0) return ret;
+ if(line[count]=='\n') {
+ line[count]='\0';
+ return count+1;
+ }
+ count+=1;
+ }
+}
+