+3 WaveLAN unter Linux
+ # http://www.seattlewireless.net/index.cgi/HardwareComparison
+ 3.1 Vorraussetzungen
+ + Kernel
+ http://www.kernel.org (>=2.4.20 - nicht unbedingt pre/testing/2.5)
+ hier: kein PCMCIA Support im Kernel sondern pcmcia_cs
+ Network device support --->
+ [*] Network device support
+ ...
+ Wireless LAN (non-hamradio) --->
+ [*] Wireless LAN (non-hamradio)
+ für PCI Karten auch:
+ <M> Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)
+ <M> Hermes in PLX9052 based PCI adaptor support
+ <M> Prism 2.5 PCI 802.11b adaptor support
+ + wireless_tools
+ http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
+ + linux/wireless.h installen
+ entweder wireless.h über /usr/include/linux/wireless.h kopieren oder
+ bei neuem kernel /usr/include/linux nach /usr/src/linux/include/linux linken
+ + compilen
+ make
+ sudo make install
+ /etc/ld.so.conf: /usr/local/lib/ (falls nötig) && ldconfig
+ + pcmcia-cs (hier - weil nicht im Kernel)
+ http://pcmcia-cs.sourceforge.net
+# TODO: config / install ...
+ 3.2 Client Setup
+ + setzen des WEPkeys
+ Bsp.: iwconfig eth0 key s:123456789abcd
+ + Wireless device hochfahren
+ Bsp.: ifconfig eth0 192.168.1.5 up
+ 3.3 AP Setup
+ + hermesap
+ + hostap
+ http://hostap.epitest.fi/
+
+4 Sicherheit
+ 4.1 WEP
+ 4.2 ACL
+ 4.3 Hidden SSID