From: hackbard <hackbard>
Date: Sun, 14 Jan 2007 19:36:21 +0000 (+0000)
Subject: added tiny 2313 definition
X-Git-Url: https://hackdaworld.org/gitweb/?a=commitdiff_plain;h=3ced418ab759e94d24d1a02d06789c644edd6461;p=my-code%2Fatmel.git

added tiny 2313 definition
---

diff --git a/include/tn2313def.inc b/include/tn2313def.inc
new file mode 100644
index 0000000..d27c821
--- /dev/null
+++ b/include/tn2313def.inc
@@ -0,0 +1,647 @@
+;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
+;***** Created: 2005-11-04 09:37 ******* Source: ATtiny2313.xml **********
+;*************************************************************************
+;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
+;* 
+;* Number            : AVR000
+;* File Name         : "tn2313def.inc"
+;* Title             : Register/Bit Definitions for the ATtiny2313
+;* Date              : 2005-11-04
+;* Version           : 2.21
+;* Support E-mail    : avr@atmel.com
+;* Target MCU        : ATtiny2313
+;* 
+;* DESCRIPTION
+;* When including this file in the assembly program file, all I/O register 
+;* names and I/O register bit names appearing in the data book can be used.
+;* In addition, the six registers forming the three data pointers X, Y and 
+;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
+;* SRAM is also defined 
+;* 
+;* The Register names are represented by their hexadecimal address.
+;* 
+;* The Register Bit names are represented by their bit number (0-7).
+;* 
+;* Please observe the difference in using the bit names with instructions
+;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
+;* (skip if bit in register set/cleared). The following example illustrates
+;* this:
+;* 
+;* in    r16,PORTB             ;read PORTB latch
+;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
+;* out   PORTB,r16             ;output to PORTB
+;* 
+;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
+;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
+;* rjmp  TOV0_is_set           ;jump if set
+;* ...                         ;otherwise do something else
+;*************************************************************************
+
+
+; ***** SPECIFY DEVICE ***************************************************
+.device ATtiny2313
+.equ	SIGNATURE_000	= 0x1e
+.equ	SIGNATURE_001	= 0x91
+.equ	SIGNATURE_002	= 0x0a
+
+
+
+; ***** I/O REGISTER DEFINITIONS *****************************************
+; NOTE:
+; Definitions marked "MEMORY MAPPED"are extended I/O ports
+; and cannot be used with IN/OUT instructions
+.equ	SREG	= 0x3f
+.equ	SPL	= 0x3d
+.equ	OCR0B	= 0x3c
+.equ	GIMSK	= 0x3b
+.equ	EIFR	= 0x3a
+.equ	TIMSK	= 0x39
+.equ	TIFR	= 0x38
+.equ	SPMCSR	= 0x37
+.equ	OCR0A	= 0x36
+.equ	MCUCR	= 0x35
+.equ	MCUSR	= 0x34
+.equ	TCCR0B	= 0x33
+.equ	TCNT0	= 0x32
+.equ	OSCCAL	= 0x31
+.equ	TCCR0A	= 0x30
+.equ	TCCR1A	= 0x2f
+.equ	TCCR1B	= 0x2e
+.equ	TCNT1L	= 0x2c
+.equ	TCNT1H	= 0x2d
+.equ	OCR1AL	= 0x2a
+.equ	OCR1AH	= 0x2b
+.equ	OCR1BL	= 0x28
+.equ	OCR1BH	= 0x29
+.equ	CLKPR	= 0x26
+.equ	ICR1L	= 0x24
+.equ	ICR1H	= 0x25
+.equ	GTCCR	= 0x23
+.equ	TCCR1C	= 0x22
+.equ	WDTCR	= 0x21
+.equ	PCMSK	= 0x20
+.equ	EEAR	= 0x1e
+.equ	EEDR	= 0x1d
+.equ	EECR	= 0x1c
+.equ	PORTA	= 0x1b
+.equ	DDRA	= 0x1a
+.equ	PINA	= 0x19
+.equ	PORTB	= 0x18
+.equ	DDRB	= 0x17
+.equ	PINB	= 0x16
+.equ	GPIOR2	= 0x15
+.equ	GPIOR1	= 0x14
+.equ	GPIOR0	= 0x13
+.equ	PORTD	= 0x12
+.equ	DDRD	= 0x11
+.equ	PIND	= 0x10
+.equ	USIDR	= 0x0f
+.equ	USISR	= 0x0e
+.equ	USICR	= 0x0d
+.equ	UDR	= 0x0c
+.equ	UCSRA	= 0x0b
+.equ	UCSRB	= 0x0a
+.equ	UBRRL	= 0x09
+.equ	ACSR	= 0x08
+.equ	UCSRC	= 0x03
+.equ	UBRRH	= 0x02
+.equ	DIDR	= 0x01
+
+
+; ***** BIT DEFINITIONS **************************************************
+
+; ***** PORTB ************************
+; PORTB - Port B Data Register
+.equ	PORTB0	= 0	; Port B Data Register bit 0
+.equ	PB0	= 0	; For compatibility
+.equ	PORTB1	= 1	; Port B Data Register bit 1
+.equ	PB1	= 1	; For compatibility
+.equ	PORTB2	= 2	; Port B Data Register bit 2
+.equ	PB2	= 2	; For compatibility
+.equ	PORTB3	= 3	; Port B Data Register bit 3
+.equ	PB3	= 3	; For compatibility
+.equ	PORTB4	= 4	; Port B Data Register bit 4
+.equ	PB4	= 4	; For compatibility
+.equ	PORTB5	= 5	; Port B Data Register bit 5
+.equ	PB5	= 5	; For compatibility
+.equ	PORTB6	= 6	; Port B Data Register bit 6
+.equ	PB6	= 6	; For compatibility
+.equ	PORTB7	= 7	; Port B Data Register bit 7
+.equ	PB7	= 7	; For compatibility
+
+; DDRB - Port B Data Direction Register
+.equ	DDB0	= 0	; Port B Data Direction Register bit 0
+.equ	DDB1	= 1	; Port B Data Direction Register bit 1
+.equ	DDB2	= 2	; Port B Data Direction Register bit 2
+.equ	DDB3	= 3	; Port B Data Direction Register bit 3
+.equ	DDB4	= 4	; Port B Data Direction Register bit 4
+.equ	DDB5	= 5	; Port B Data Direction Register bit 5
+.equ	DDB6	= 6	; Port B Data Direction Register bit 6
+.equ	DDB7	= 7	; Port B Data Direction Register bit 7
+
+; PINB - Port B Input Pins
+.equ	PINB0	= 0	; Port B Input Pins bit 0
+.equ	PINB1	= 1	; Port B Input Pins bit 1
+.equ	PINB2	= 2	; Port B Input Pins bit 2
+.equ	PINB3	= 3	; Port B Input Pins bit 3
+.equ	PINB4	= 4	; Port B Input Pins bit 4
+.equ	PINB5	= 5	; Port B Input Pins bit 5
+.equ	PINB6	= 6	; Port B Input Pins bit 6
+.equ	PINB7	= 7	; Port B Input Pins bit 7
+
+
+; ***** TIMER_COUNTER_0 **************
+; TIMSK - Timer/Counter Interrupt Mask Register
+.equ	OCIE0A	= 0	; Timer/Counter0 Output Compare Match A Interrupt Enable
+.equ	TOIE0	= 1	; Timer/Counter0 Overflow Interrupt Enable
+.equ	OCIE0B	= 2	; Timer/Counter0 Output Compare Match B Interrupt Enable
+
+; TIFR - Timer/Counter Interrupt Flag register
+.equ	OCF0A	= 0	; Timer/Counter0 Output Compare Flag 0A
+.equ	TOV0	= 1	; Timer/Counter0 Overflow Flag
+.equ	OCF0B	= 2	; Timer/Counter0 Output Compare Flag 0B
+
+; OCR0B - Timer/Counter0 Output Compare Register
+.equ	OCR0_0	= 0	; 
+.equ	OCR0_1	= 1	; 
+.equ	OCR0_2	= 2	; 
+.equ	OCR0_3	= 3	; 
+.equ	OCR0_4	= 4	; 
+.equ	OCR0_5	= 5	; 
+.equ	OCR0_6	= 6	; 
+.equ	OCR0_7	= 7	; 
+
+; OCR0A - Timer/Counter0 Output Compare Register
+;.equ	OCR0_0	= 0	; 
+;.equ	OCR0_1	= 1	; 
+;.equ	OCR0_2	= 2	; 
+;.equ	OCR0_3	= 3	; 
+;.equ	OCR0_4	= 4	; 
+;.equ	OCR0_5	= 5	; 
+;.equ	OCR0_6	= 6	; 
+;.equ	OCR0_7	= 7	; 
+
+; TCCR0A - Timer/Counter  Control Register A
+.equ	WGM00	= 0	; Waveform Generation Mode
+.equ	WGM01	= 1	; Waveform Generation Mode
+.equ	COM0B0	= 4	; Compare Match Output B Mode
+.equ	COM0B1	= 5	; Compare Match Output B Mode
+.equ	COM0A0	= 6	; Compare Match Output A Mode
+.equ	COM0A1	= 7	; Compare Match Output A Mode
+
+; TCNT0 - Timer/Counter0
+.equ	TCNT0_0	= 0	; 
+.equ	TCNT0_1	= 1	; 
+.equ	TCNT0_2	= 2	; 
+.equ	TCNT0_3	= 3	; 
+.equ	TCNT0_4	= 4	; 
+.equ	TCNT0_5	= 5	; 
+.equ	TCNT0_6	= 6	; 
+.equ	TCNT0_7	= 7	; 
+
+; TCCR0B - Timer/Counter Control Register B
+.equ	TCCR0	= TCCR0B	; For compatibility
+.equ	CS00	= 0	; Clock Select
+.equ	CS01	= 1	; Clock Select
+.equ	CS02	= 2	; Clock Select
+.equ	WGM02	= 3	; 
+.equ	FOC0B	= 6	; Force Output Compare B
+.equ	FOC0A	= 7	; Force Output Compare B
+
+
+; ***** TIMER_COUNTER_1 **************
+; TIMSK - Timer/Counter Interrupt Mask Register
+.equ	ICIE1	= 3	; Timer/Counter1 Input Capture Interrupt Enable
+.equ	TICIE	= ICIE1	; For compatibility
+.equ	OCIE1B	= 5	; Timer/Counter1 Output CompareB Match Interrupt Enable
+.equ	OCIE1A	= 6	; Timer/Counter1 Output CompareA Match Interrupt Enable
+.equ	TOIE1	= 7	; Timer/Counter1 Overflow Interrupt Enable
+
+; TIFR - Timer/Counter Interrupt Flag register
+.equ	ICF1	= 3	; Input Capture Flag 1
+.equ	OCF1B	= 5	; Output Compare Flag 1B
+.equ	OCF1A	= 6	; Output Compare Flag 1A
+.equ	TOV1	= 7	; Timer/Counter1 Overflow Flag
+
+; TCCR1A - Timer/Counter1 Control Register A
+.equ	WGM10	= 0	; Pulse Width Modulator Select Bit 0
+.equ	PWM10	= WGM10	; For compatibility
+.equ	WGM11	= 1	; Pulse Width Modulator Select Bit 1
+.equ	PWM11	= WGM11	; For compatibility
+.equ	COM1B0	= 4	; Comparet Ouput Mode 1B, bit 0
+.equ	COM1B1	= 5	; Compare Output Mode 1B, bit 1
+.equ	COM1A0	= 6	; Comparet Ouput Mode 1A, bit 0
+.equ	COM1A1	= 7	; Compare Output Mode 1A, bit 1
+
+; TCCR1B - Timer/Counter1 Control Register B
+.equ	CS10	= 0	; Clock Select bit 0
+.equ	CS11	= 1	; Clock Select 1 bit 1
+.equ	CS12	= 2	; Clock Select1 bit 2
+.equ	WGM12	= 3	; Waveform Generation Mode Bit 2
+.equ	CTC1	= WGM12	; For compatibility
+.equ	WGM13	= 4	; Waveform Generation Mode Bit 3
+.equ	ICES1	= 6	; Input Capture 1 Edge Select
+.equ	ICNC1	= 7	; Input Capture 1 Noise Canceler
+
+; TCCR1C - Timer/Counter1 Control Register C
+.equ	FOC1B	= 6	; Force Output Compare for Channel B
+.equ	FOC1A	= 7	; Force Output Compare for Channel A
+
+
+; ***** WATCHDOG *********************
+; WDTCR - Watchdog Timer Control Register
+.equ	WDTCSR	= WDTCR	; For compatibility
+.equ	WDP0	= 0	; Watch Dog Timer Prescaler bit 0
+.equ	WDP1	= 1	; Watch Dog Timer Prescaler bit 1
+.equ	WDP2	= 2	; Watch Dog Timer Prescaler bit 2
+.equ	WDE	= 3	; Watch Dog Enable
+.equ	WDCE	= 4	; Watchdog Change Enable
+.equ	WDTOE	= WDCE	; For compatibility
+.equ	WDP3	= 5	; Watchdog Timer Prescaler Bit 3
+.equ	WDIE	= 6	; Watchdog Timeout Interrupt Enable
+.equ	WDIF	= 7	; Watchdog Timeout Interrupt Flag
+
+
+; ***** EXTERNAL_INTERRUPT ***********
+; GIMSK - General Interrupt Mask Register
+.equ	PCIE	= 5	; 
+.equ	INT0	= 6	; External Interrupt Request 0 Enable
+.equ	INT1	= 7	; External Interrupt Request 1 Enable
+
+; EIFR - Extended Interrupt Flag Register
+.equ	GIFR	= EIFR	; For compatibility
+.equ	PCIF	= 5	; 
+.equ	INTF0	= 6	; External Interrupt Flag 0
+.equ	INTF1	= 7	; External Interrupt Flag 1
+
+
+; ***** USART ************************
+; UDR - USART I/O Data Register
+.equ	UDR0	= 0	; USART I/O Data Register bit 0
+.equ	UDR1	= 1	; USART I/O Data Register bit 1
+.equ	UDR2	= 2	; USART I/O Data Register bit 2
+.equ	UDR3	= 3	; USART I/O Data Register bit 3
+.equ	UDR4	= 4	; USART I/O Data Register bit 4
+.equ	UDR5	= 5	; USART I/O Data Register bit 5
+.equ	UDR6	= 6	; USART I/O Data Register bit 6
+.equ	UDR7	= 7	; USART I/O Data Register bit 7
+
+; UCSRA - USART Control and Status Register A
+.equ	USR	= UCSRA	; For compatibility
+.equ	MPCM	= 0	; Multi-processor Communication Mode
+.equ	U2X	= 1	; Double the USART Transmission Speed
+.equ	UPE	= 2	; USART Parity Error
+.equ	PE	= UPE	; For compatibility
+.equ	DOR	= 3	; Data overRun
+.equ	FE	= 4	; Framing Error
+.equ	UDRE	= 5	; USART Data Register Empty
+.equ	TXC	= 6	; USART Transmitt Complete
+.equ	RXC	= 7	; USART Receive Complete
+
+; UCSRB - USART Control and Status Register B
+.equ	UCR	= UCSRB	; For compatibility
+.equ	TXB8	= 0	; Transmit Data Bit 8
+.equ	RXB8	= 1	; Receive Data Bit 8
+.equ	UCSZ2	= 2	; Character Size
+.equ	CHR9	= UCSZ2	; For compatibility
+.equ	TXEN	= 3	; Transmitter Enable
+.equ	RXEN	= 4	; Receiver Enable
+.equ	UDRIE	= 5	; USART Data register Empty Interrupt Enable
+.equ	TXCIE	= 6	; TX Complete Interrupt Enable
+.equ	RXCIE	= 7	; RX Complete Interrupt Enable
+
+; UCSRC - USART Control and Status Register C
+.equ	UCPOL	= 0	; Clock Polarity
+.equ	UCSZ0	= 1	; Character Size Bit 0
+.equ	UCSZ1	= 2	; Character Size Bit 1
+.equ	USBS	= 3	; Stop Bit Select
+.equ	UPM0	= 4	; Parity Mode Bit 0
+.equ	UPM1	= 5	; Parity Mode Bit 1
+.equ	UMSEL	= 6	; USART Mode Select
+
+.equ	UBRR	= UBRRL	; For compatibility
+
+; ***** ANALOG_COMPARATOR ************
+; ACSR - Analog Comparator Control And Status Register
+.equ	ACIS0	= 0	; Analog Comparator Interrupt Mode Select bit 0
+.equ	ACIS1	= 1	; Analog Comparator Interrupt Mode Select bit 1
+.equ	ACIC	= 2	; 
+.equ	ACIE	= 3	; Analog Comparator Interrupt Enable
+.equ	ACI	= 4	; Analog Comparator Interrupt Flag
+.equ	ACO	= 5	; Analog Compare Output
+.equ	ACBG	= 6	; Analog Comparator Bandgap Select
+.equ	ACD	= 7	; Analog Comparator Disable
+
+; DIDR - Digital Input Disable Register 1
+.equ	AIN0D	= 0	; AIN0 Digital Input Disable
+.equ	AIN1D	= 1	; AIN1 Digital Input Disable
+
+
+; ***** PORTD ************************
+; PORTD - Data Register, Port D
+.equ	PORTD0	= 0	; 
+.equ	PD0	= 0	; For compatibility
+.equ	PORTD1	= 1	; 
+.equ	PD1	= 1	; For compatibility
+.equ	PORTD2	= 2	; 
+.equ	PD2	= 2	; For compatibility
+.equ	PORTD3	= 3	; 
+.equ	PD3	= 3	; For compatibility
+.equ	PORTD4	= 4	; 
+.equ	PD4	= 4	; For compatibility
+.equ	PORTD5	= 5	; 
+.equ	PD5	= 5	; For compatibility
+.equ	PORTD6	= 6	; 
+.equ	PD6	= 6	; For compatibility
+
+; DDRD
+.equ	DDD0	= 0	; 
+.equ	DDD1	= 1	; 
+.equ	DDD2	= 2	; 
+.equ	DDD3	= 3	; 
+.equ	DDD4	= 4	; 
+.equ	DDD5	= 5	; 
+.equ	DDD6	= 6	; 
+
+; PIND - Input Pins, Port D
+.equ	PIND0	= 0	; 
+.equ	PIND1	= 1	; 
+.equ	PIND2	= 2	; 
+.equ	PIND3	= 3	; 
+.equ	PIND4	= 4	; 
+.equ	PIND5	= 5	; 
+.equ	PIND6	= 6	; 
+
+
+; ***** EEPROM ***********************
+; EEAR - EEPROM Read/Write Access
+.equ	EEARL	= EEAR	; For compatibility
+.equ	EEAR0	= 0	; EEPROM Read/Write Access bit 0
+.equ	EEAR1	= 1	; EEPROM Read/Write Access bit 1
+.equ	EEAR2	= 2	; EEPROM Read/Write Access bit 2
+.equ	EEAR3	= 3	; EEPROM Read/Write Access bit 3
+.equ	EEAR4	= 4	; EEPROM Read/Write Access bit 4
+.equ	EEAR5	= 5	; EEPROM Read/Write Access bit 5
+.equ	EEAR6	= 6	; EEPROM Read/Write Access bit 6
+
+; EEDR - EEPROM Data Register
+.equ	EEDR0	= 0	; EEPROM Data Register bit 0
+.equ	EEDR1	= 1	; EEPROM Data Register bit 1
+.equ	EEDR2	= 2	; EEPROM Data Register bit 2
+.equ	EEDR3	= 3	; EEPROM Data Register bit 3
+.equ	EEDR4	= 4	; EEPROM Data Register bit 4
+.equ	EEDR5	= 5	; EEPROM Data Register bit 5
+.equ	EEDR6	= 6	; EEPROM Data Register bit 6
+.equ	EEDR7	= 7	; EEPROM Data Register bit 7
+
+; EECR - EEPROM Control Register
+.equ	EERE	= 0	; EEPROM Read Enable
+.equ	EEPE	= 1	; EEPROM Write Enable
+.equ	EEWE	= EEPE	; For compatibility
+.equ	EEMPE	= 2	; EEPROM Master Write Enable
+.equ	EEMWE	= EEMPE	; For compatibility
+.equ	EERIE	= 3	; EEProm Ready Interrupt Enable
+.equ	EEPM0	= 4	; 
+.equ	EEPM1	= 5	; 
+
+
+; ***** PORTA ************************
+; PORTA - Port A Data Register
+.equ	PORTA0	= 0	; Port A Data Register bit 0
+.equ	PA0	= 0	; For compatibility
+.equ	PORTA1	= 1	; Port A Data Register bit 1
+.equ	PA1	= 1	; For compatibility
+.equ	PORTA2	= 2	; Port A Data Register bit 2
+.equ	PA2	= 2	; For compatibility
+
+; DDRA - Port A Data Direction Register
+.equ	DDA0	= 0	; Data Direction Register, Port A, bit 0
+.equ	DDA1	= 1	; Data Direction Register, Port A, bit 1
+.equ	DDA2	= 2	; Data Direction Register, Port A, bit 2
+
+; PINA - Port A Input Pins
+.equ	PINA0	= 0	; Input Pins, Port A bit 0
+.equ	PINA1	= 1	; Input Pins, Port A bit 1
+.equ	PINA2	= 2	; Input Pins, Port A bit 2
+
+
+; ***** CPU **************************
+; SREG - Status Register
+.equ	SREG_C	= 0	; Carry Flag
+.equ	SREG_Z	= 1	; Zero Flag
+.equ	SREG_N	= 2	; Negative Flag
+.equ	SREG_V	= 3	; Two's Complement Overflow Flag
+.equ	SREG_S	= 4	; Sign Bit
+.equ	SREG_H	= 5	; Half Carry Flag
+.equ	SREG_T	= 6	; Bit Copy Storage
+.equ	SREG_I	= 7	; Global Interrupt Enable
+
+; SPMCSR - Store Program Memory Control and Status register
+.equ	SPMEN	= 0	; Store Program Memory Enable
+.equ	PGERS	= 1	; Page Erase
+.equ	PGWRT	= 2	; Page Write
+.equ	RFLB	= 3	; Read Fuse and Lock Bits
+.equ	CTPB	= 4
+
+; MCUCR - MCU Control Register
+.equ	ISC00	= 0	; Interrupt Sense Control 0 bit 0
+.equ	ISC01	= 1	; Interrupt Sense Control 0 bit 1
+.equ	ISC10	= 2	; Interrupt Sense Control 1 bit 0
+.equ	ISC11	= 3	; Interrupt Sense Control 1 bit 1
+.equ	SM0	= 4	; Sleep Mode Select Bit 0
+.equ	SM	= SM0	; For compatibility
+.equ	SE	= 5	; Sleep Enable
+.equ	SM1	= 6	; Sleep Mode Select Bit 1
+.equ	PUD	= 7	; Pull-up Disable
+
+; CLKPR - Clock Prescale Register
+.equ	CLKPS0	= 0	; Clock Prescaler Select Bit 0
+.equ	CLKPS1	= 1	; Clock Prescaler Select Bit 1
+.equ	CLKPS2	= 2	; Clock Prescaler Select Bit 2
+.equ	CLKPS3	= 3	; Clock Prescaler Select Bit 3
+.equ	CLKPCE	= 7	; Clock Prescaler Change Enable
+
+; MCUSR - MCU Status register
+.equ	PORF	= 0	; Power-On Reset Flag
+.equ	EXTRF	= 1	; External Reset Flag
+.equ	BORF	= 2	; Brown-out Reset Flag
+.equ	WDRF	= 3	; Watchdog Reset Flag
+
+; OSCCAL - Oscillator Calibration Register
+.equ	CAL0	= 0	; Oscillatro Calibration Value Bit 0
+.equ	CAL1	= 1	; Oscillatro Calibration Value Bit 1
+.equ	CAL2	= 2	; Oscillatro Calibration Value Bit 2
+.equ	CAL3	= 3	; Oscillatro Calibration Value Bit 3
+.equ	CAL4	= 4	; Oscillatro Calibration Value Bit 4
+.equ	CAL5	= 5	; Oscillatro Calibration Value Bit 5
+.equ	CAL6	= 6	; Oscillatro Calibration Value Bit 6
+
+; GTCCR - General Timer Counter Control Register
+.equ	SFIOR	= GTCCR	; For compatibility
+.equ	PSR10	= 0	; 
+
+; PCMSK - Pin-Change Mask register
+.equ	PCINT0	= 0	; Pin-Change Interrupt 0
+.equ	PCINT1	= 1	; Pin-Change Interrupt 1
+.equ	PCINT2	= 2	; Pin-Change Interrupt 2
+.equ	PCINT3	= 3	; Pin-Change Interrupt 3
+.equ	PCINT4	= 4	; Pin-Change Interrupt 4
+.equ	PCINT5	= 5	; Pin-Change Interrupt 5
+.equ	PCINT6	= 6	; Pin-Change Interrupt 6
+.equ	PCINT7	= 7	; Pin-Change Interrupt 7
+
+; GPIOR2 - General Purpose I/O Register 2
+.equ	GPIOR20	= 0	; General Purpose I/O Register 2 bit 0
+.equ	GPIOR21	= 1	; General Purpose I/O Register 2 bit 1
+.equ	GPIOR22	= 2	; General Purpose I/O Register 2 bit 2
+.equ	GPIOR23	= 3	; General Purpose I/O Register 2 bit 3
+.equ	GPIOR24	= 4	; General Purpose I/O Register 2 bit 4
+.equ	GPIOR25	= 5	; General Purpose I/O Register 2 bit 5
+.equ	GPIOR26	= 6	; General Purpose I/O Register 2 bit 6
+.equ	GPIOR27	= 7	; General Purpose I/O Register 2 bit 7
+
+; GPIOR1 - General Purpose I/O Register 1
+.equ	GPIOR10	= 0	; General Purpose I/O Register 1 bit 0
+.equ	GPIOR11	= 1	; General Purpose I/O Register 1 bit 1
+.equ	GPIOR12	= 2	; General Purpose I/O Register 1 bit 2
+.equ	GPIOR13	= 3	; General Purpose I/O Register 1 bit 3
+.equ	GPIOR14	= 4	; General Purpose I/O Register 1 bit 4
+.equ	GPIOR15	= 5	; General Purpose I/O Register 1 bit 5
+.equ	GPIOR16	= 6	; General Purpose I/O Register 1 bit 6
+.equ	GPIOR17	= 7	; General Purpose I/O Register 1 bit 7
+
+; GPIOR0 - General Purpose I/O Register 0
+.equ	GPIOR00	= 0	; General Purpose I/O Register 0 bit 0
+.equ	GPIOR01	= 1	; General Purpose I/O Register 0 bit 1
+.equ	GPIOR02	= 2	; General Purpose I/O Register 0 bit 2
+.equ	GPIOR03	= 3	; General Purpose I/O Register 0 bit 3
+.equ	GPIOR04	= 4	; General Purpose I/O Register 0 bit 4
+.equ	GPIOR05	= 5	; General Purpose I/O Register 0 bit 5
+.equ	GPIOR06	= 6	; General Purpose I/O Register 0 bit 6
+.equ	GPIOR07	= 7	; General Purpose I/O Register 0 bit 7
+
+
+; ***** USI **************************
+; USIDR - USI Data Register
+.equ	USIDR0	= 0	; USI Data Register bit 0
+.equ	USIDR1	= 1	; USI Data Register bit 1
+.equ	USIDR2	= 2	; USI Data Register bit 2
+.equ	USIDR3	= 3	; USI Data Register bit 3
+.equ	USIDR4	= 4	; USI Data Register bit 4
+.equ	USIDR5	= 5	; USI Data Register bit 5
+.equ	USIDR6	= 6	; USI Data Register bit 6
+.equ	USIDR7	= 7	; USI Data Register bit 7
+
+; USISR - USI Status Register
+.equ	USICNT0	= 0	; USI Counter Value Bit 0
+.equ	USICNT1	= 1	; USI Counter Value Bit 1
+.equ	USICNT2	= 2	; USI Counter Value Bit 2
+.equ	USICNT3	= 3	; USI Counter Value Bit 3
+.equ	USIDC	= 4	; Data Output Collision
+.equ	USIPF	= 5	; Stop Condition Flag
+.equ	USIOIF	= 6	; Counter Overflow Interrupt Flag
+.equ	USISIF	= 7	; Start Condition Interrupt Flag
+
+; USICR - USI Control Register
+.equ	USITC	= 0	; Toggle Clock Port Pin
+.equ	USICLK	= 1	; Clock Strobe
+.equ	USICS0	= 2	; USI Clock Source Select Bit 0
+.equ	USICS1	= 3	; USI Clock Source Select Bit 1
+.equ	USIWM0	= 4	; USI Wire Mode Bit 0
+.equ	USIWM1	= 5	; USI Wire Mode Bit 1
+.equ	USIOIE	= 6	; Counter Overflow Interrupt Enable
+.equ	USISIE	= 7	; Start Condition Interrupt Enable
+
+
+
+; ***** LOCKSBITS ********************************************************
+.equ	LB1	= 0	; Lockbit
+.equ	LB2	= 1	; Lockbit
+
+
+; ***** FUSES ************************************************************
+; LOW fuse bits
+.equ	CKSEL0	= 0	; Select Clock Source
+.equ	CKSEL1	= 1	; Select Clock Source
+.equ	CKSEL2	= 2	; Select Clock Source
+.equ	CKSEL3	= 3	; Select Clock Source
+.equ	SUT0	= 4	; Select start-up time
+.equ	SUT1	= 5	; Select start-up time
+.equ	CKOUT	= 6	; Clock output
+.equ	CKDIV8	= 7	; Divide clock by 8
+
+; HIGH fuse bits
+.equ	BODLEVEL0	= 0	; Brown-out Detector trigger level
+.equ	BODLEVEL1	= 1	; Brown-out Detector trigger level
+.equ	BODLEVEL2	= 2	; Brown-out Detector trigger level
+.equ	EESAVE	= 3	; EEPROM memory is preserved through chip erase
+.equ	WDTON	= 4	; Watchdog Timer Always On
+.equ	SPIEN	= 5	; Enable Serial programming and Data Downloading
+.equ	DWEN	= 6	; debugWIRE Enable
+.equ	RSTDISBL	= 7	; External reset disable
+
+; EXTENDED fuse bits
+.equ	SELFPRGEN	= 0	; Self Programming Enable
+
+
+
+; ***** CPU REGISTER DEFINITIONS *****************************************
+.def	XH	= r27
+.def	XL	= r26
+.def	YH	= r29
+.def	YL	= r28
+.def	ZH	= r31
+.def	ZL	= r30
+
+
+
+; ***** DATA MEMORY DECLARATIONS *****************************************
+.equ	FLASHEND	= 0x03ff	; Note: Word address
+.equ	IOEND	= 0x003f
+.equ	SRAM_START	= 0x0060
+.equ	SRAM_SIZE	= 128
+.equ	RAMEND	= 0x00df
+.equ	XRAMEND	= 0x0000
+.equ	E2END	= 0x007f
+.equ	EEPROMEND	= 0x007f
+.equ	EEADRBITS	= 7
+
+
+
+; ***** BOOTLOADER DECLARATIONS ******************************************
+.equ	NRWW_START_ADDR	= 0x0
+.equ	NRWW_STOP_ADDR	= 0x3ff
+.equ	RWW_START_ADDR	= 0x0
+.equ	RWW_STOP_ADDR	= 0x0
+.equ	PAGESIZE	= 16
+
+
+
+; ***** INTERRUPT VECTORS ************************************************
+.equ	INT0addr	= 0x0001	; External Interrupt Request 0
+.equ	INT1addr	= 0x0002	; External Interrupt Request 1
+.equ	ICP1addr	= 0x0003	; Timer/Counter1 Capture Event
+.equ	OC1Aaddr	= 0x0004	; Timer/Counter1 Compare Match A
+.equ	OC1addr	= 0x0004	; For compatibility
+.equ	OVF1addr	= 0x0005	; Timer/Counter1 Overflow
+.equ	OVF0addr	= 0x0006	; Timer/Counter0 Overflow
+.equ	URXCaddr	= 0x0007	; USART, Rx Complete
+.equ	URXC0addr	= 0x0007	; For compatibility
+.equ	UDREaddr	= 0x0008	; USART Data Register Empty
+.equ	UDRE0addr	= 0x0008	; For compatibility
+.equ	UTXCaddr	= 0x0009	; USART, Tx Complete
+.equ	UTXC0addr	= 0x0009	; For compatibility
+.equ	ACIaddr	= 0x000a	; Analog Comparator
+.equ	PCIaddr	= 0x000b	; 
+.equ	OC1Baddr	= 0x000c	; 
+.equ	OC0Aaddr	= 0x000d	; 
+.equ	OC0Baddr	= 0x000e	; 
+.equ	USI_STARTaddr	= 0x000f	; USI Start Condition
+.equ	USI_OVFaddr	= 0x0010	; USI Overflow
+.equ	ERDYaddr	= 0x0011	; 
+.equ	WDTaddr	= 0x0012	; Watchdog Timer Overflow
+
+.equ	INT_VECTORS_SIZE	= 19	; size in words
+
+
+; ***** END OF FILE ******************************************************