From: hackbard <hackbard@sage.physik.uni-augsburg.de>
Date: Wed, 16 Feb 2011 15:24:54 +0000 (+0100)
Subject: more control
X-Git-Url: https://hackdaworld.org/gitweb/?a=commitdiff_plain;h=e9e711fa8f239e1ce03993cc2502a2d8df48cd9d;p=my-code%2Fatmel.git

more control
---

diff --git a/monolyzer/main.asm b/monolyzer/main.asm
index bcc6c1c..e17e9a7 100644
--- a/monolyzer/main.asm
+++ b/monolyzer/main.asm
@@ -35,7 +35,7 @@ reti
 reti
 
 ; T1 OVF1
-reti
+rjmp T1_OVF_IR
 
 ; T0 OVF0
 reti
@@ -104,23 +104,18 @@ INIT:
 
 	; more init
 	ldi count,0
-	ldi state,1
+	ldi state,0
 
 	; storage pointer
 	ldi ZL,low(STORAGE)
 	ldi ZH,high(STORAGE)
 
-	; counter
-	ldi tmp1,0
-	out TCNT1H,tmp1
-	out TCNT1L,tmp1
-
 	; signal ready output
 	ldi uart_rxtx,0x72
 	rcall UART_TX
 
 	; external interrupt enable
-	rcall INT0_IR_CONF
+	rcall INT0_IR_CONF_INIT
 	rcall INT0_IR_ENABLE
 
 	; global interrupt enable
@@ -131,11 +126,12 @@ MAIN:
 SAMPLE:
 
 	; sample as long as there is storage capacity
-	sbrc state,0
+	sbrs state,0
 	rjmp SAMPLE
 
-	; external interrupt enable
+	; disable interrupts
 	rcall INT0_IR_DISABLE
+	rcall TIMER1_INT_DISABLE
 
 	; signal finish
 	ldi uart_rxtx,0x66
@@ -159,7 +155,11 @@ TRANSFER:
 	; reset storage pointer
 	ldi ZL,low(STORAGE)
 	ldi ZH,high(STORAGE)
-	ldi count,0
+	ldi tmp1,0
+
+	; transmit number of sampled words
+	mov uart_rxtx,count
+	rcall UART_TX
 
 TRANSFER_LOOP:
 
@@ -168,10 +168,10 @@ TRANSFER_LOOP:
 	rcall UART_TX
 
 	; count sent data
-	add count,one
+	add tmp1,one
 
 	; check amount of sent data
-	cpi count,110
+	cp tmp1,count
 	breq IDLE
 
 	rjmp TRANSFER_LOOP
@@ -190,9 +190,29 @@ INT0_IR:
 	; debug output
 	; cbi PORTD,3
 
-	; write timer value into sram
+	; get timer value
 	in tmp1,TCNT1L
 	in tmp2,TCNT1H
+
+	; check for initial or running state
+	cpi state,0
+	brne INT0_RUN
+
+	; configure interrupt for running state
+	rcall INT0_IR_CONF_RUN
+	ldi state,1
+
+	; reset timer and start ovf interrupt
+	ldi tmp1,0
+	out TCNT1H,tmp1
+	out TCNT1L,tmp1
+	rcall TIMER1_INT_ENABLE
+
+	rjmp EXIT_IR
+
+INT0_RUN:
+
+	; write timer value into sram
 	st Z+,tmp2
 	st Z+,tmp1
 
@@ -213,6 +233,13 @@ EXIT_IR:
 
 	reti
 
+T1_OVF_IR:
+
+	; exit sampling
+	ldi state,0
+
+	reti
+
 
 ;
 ; sram
diff --git a/monolyzer/port.asm b/monolyzer/port.asm
index d3ea524..42c08fa 100644
--- a/monolyzer/port.asm
+++ b/monolyzer/port.asm
@@ -20,7 +20,17 @@ PORT_INIT:
 	ret
 
 
-INT0_IR_CONF:
+INT0_IR_CONF_INIT:
+
+	; trigger interrupt on rising edge
+	in tmp1,MCUCR
+	sbr tmp1,(1<<ISC01)
+	sbr tmp1,(1<<ISC00)
+	out MCUCR,tmp1
+
+	ret
+
+INT0_IR_CONF_RUN:
 
 	; trigger interrupt on falling and rising edge
 	in tmp1,MCUCR
diff --git a/monolyzer/timer.asm b/monolyzer/timer.asm
index 2f14b69..3327547 100644
--- a/monolyzer/timer.asm
+++ b/monolyzer/timer.asm
@@ -3,8 +3,29 @@
 TIMER1_INIT:
 
 	; clock select, prescaler 8
-	ldi tmp1,0x02
+	in tmp1,TCCR1B
+	cbr tmp1,(1<<CS12)
+	sbr tmp1,(1<<CS11)
+	cbr tmp1,(1<<CS10)
 	out TCCR1B,tmp1
 
 	ret
 
+TIMER1_INT_ENABLE:
+
+	; overflow interrupt enable
+	in tmp1,TIMSK
+	sbr tmp1,(1<<TOIE1)
+	out TIMSK,tmp1
+
+	ret
+
+TIMER1_INT_DISABLE:
+
+	; overflow interrupt disable
+	in tmp1,TIMSK
+	cbr tmp1,(1<<TOIE1)
+	out TIMSK,tmp1
+
+	ret
+