From: hackbard <hackbard>
Date: Sun, 14 Nov 2004 11:29:07 +0000 (+0000)
Subject: fading lieghts, but strange behaviour with led_b
X-Git-Url: https://hackdaworld.org/gitweb/?a=commitdiff_plain;h=f46755da7a25916d0f212f02d8aafa5060440302;p=my-code%2Fatmel.git

fading lieghts, but strange behaviour with led_b
---

diff --git a/beginners/rgb_mali.asm b/beginners/rgb_mali.asm
index fc89777..ca83557 100644
--- a/beginners/rgb_mali.asm
+++ b/beginners/rgb_mali.asm
@@ -17,18 +17,18 @@
 .def tmp = r16
 .def uart_count = r17
 .def count = r18
-.def R = r19
-.def G = r20
-.def B = r21
-.def mode r22
-.equ cm 0
-.equ rgb 1
+.def RED = r19
+.def GREEN = r20
+.def BLUE = r21
+.def mode = r22
+.equ cm = 0
+.equ rgb = 1
 .def OUTR = r23
 .def FULLR = r24
-.equ LED_R PD2
-.equ LED_G PD3
-.equ LED_B PD4
-.equ LED_PORT PORTD
+.equ LED_R = PD2
+.equ LED_G = PD3
+.equ LED_B = PD4
+.equ LED_PORT = PORTD
 
 ;
 ; interrupt voctors
@@ -44,7 +44,7 @@ reti
 ; timer/counter compare
 reti
 ; timer/counter overflow 1
-reti
+rjmp INC_RGB
 ; timer/counter overflow 0
 reti
 ; uart rx complete
@@ -63,6 +63,12 @@ INIT:
 ; alloc stack pointer
 ldi r16,low(RAMEND)
 out SPL,r16
+; timer: clock/1024
+ldi tmp,((1<<CS11))
+out TCCR1B,tmp
+; enable timer overflow interrupt
+ldi tmp,(1<<TOIE1)
+out TIMSK,tmp
 ; enable uart + rx complete interrupt
 ldi tmp,51 ; 9600 baud, 0,2% error @ 8mhz
 out UBRR,tmp
@@ -75,17 +81,26 @@ ldi tmp,0
 mov zero,tmp
 ldi uart_count,0
 ldi count,0
-ldi R,0xff
-ldi G,0xff
-ldi B,0xff
+ldi RED,0x22
+ldi GREEN,0x77
+ldi BLUE,0xff
 ; led pins are outputs
 ldi tmp,((1<<LED_R)|(1<<LED_G)|(1<<LED_B))
 out DDRD,tmp
-; enable interrupts (global=
+; enable interrupts (global)
 sei
 ; jump to main
 rjmp MAIN
 
+;
+; increase rgb values
+;
+INC_RGB:
+add RED,one
+add BLUE,one
+add GREEN,one
+reti
+
 ;
 ; main routine
 ;
@@ -106,15 +121,15 @@ rjmp CHECK_RED
 ;
 ; reset leds
 ;
+RESET_LEDS:
 ldi OUTR,((1<<LED_R)|(1<<LED_G)|(LED_B))
-add count,one
-ret
+rjmp CHECK_RED
 
 ;
 ; check red + jump to green check
 ;
 CHECK_RED:
-cp count,R
+cp count,RED
 breq SWITCH_OFF_R
 rjmp CHECK_GREEN
 
@@ -129,7 +144,7 @@ rjmp CHECK_GREEN
 ; check green + jump to blue check
 ;
 CHECK_GREEN:
-cp count,G
+cp count,GREEN
 breq SWITCH_OFF_G
 rjmp CHECK_BLUE
 
@@ -144,15 +159,15 @@ rjmp CHECK_BLUE
 ; check blue + "do the light"
 ;
 CHECK_BLUE:
-cp count,B
+cp count,BLUE
 breq SWITCH_OFF_B
 rjmp LIGHT
 
 ;
 ; switch of blue led
 ;
-SWITCH_OFF_G:
-sub OUTR,(1<<LED_B)
+SWITCH_OFF_B:
+subi OUTR,(1<<LED_B)
 rjmp LIGHT
 
 ;
@@ -160,15 +175,15 @@ rjmp LIGHT
 ;
 LIGHT:
 ldi FULLR,0xff
-sub FULLR,OUTR
+eor FULLR,OUTR
 out LED_PORT,FULLR
-
 rjmp INC_COUNT
 
 ;
 ; increase counter + jump back to main loop
 ;
-add counter,one
+INC_COUNT:
+add count,one
 rjmp LOOP
 
 ;