From: hackbard <hackbard>
Date: Fri, 23 Jan 2004 03:09:14 +0000 (+0000)
Subject: etwas zu prall ..
X-Git-Url: https://hackdaworld.org/gitweb/?a=commitdiff_plain;h=fe1a3b3896f1f119cdde663e02a709531dffc26d;p=my-code%2Fatmel.git

etwas zu prall ..
---

diff --git a/beginners/season_junior.asm b/beginners/season_junior.asm
index 703b29f..6ed66de 100644
--- a/beginners/season_junior.asm
+++ b/beginners/season_junior.asm
@@ -46,6 +46,10 @@
 .define etu_h 312
 .define baudrate 5 ; UBRR value for 76800 bits/s (8mhz clock)
 
+; sizes
+.define uart_data_len 4
+.define uart_data_len_f 3
+
 ; names for registers
 .define tmp r16
 .define bitcount r17
@@ -60,6 +64,8 @@
 .define mode r26
 .define counter_l_tmp r27
 .define counter_h_tmp r28
+.define address_h r31
+.define address_l r30
 .define one r1
 .define zero r0
 
@@ -166,6 +172,7 @@ ldi state_m,0x03
 ldi mode,(STUPID|COOL)
 ldi counter_l_tmp,0
 ldi counter_h_tmp,0
+ldi address_h,SRAM_START_H
 ldi tmp,1
 mov one,tmp
 ldi tmp,0
@@ -193,7 +200,7 @@ rjmp MAIN
 REC_CARD:
 
 ; save counter
-in counter_l,ICR1L
+In counter_l,ICR1L
 in counter_h,ICR1H
 
 ; toggle state
@@ -212,7 +219,7 @@ rcall CALC_DELTA_CLOCK ; -> calc delta, store to counter_l_tmp, counter_h_tmp
 
 ; send time and state via uart
 sbrc mode,COOL_F
-rcall SEND_TO_UART ; -> prepare date & enable uart dre interrupt (sbi UCR,UDRIE)
+rcall PREPARE_UART
 
 ; return
 reti
@@ -224,9 +231,11 @@ reti
 TOGGLE_ICP_SENSE:
 
 ; toggle according to state
-cbi TCCR1B,ICES1
-sbrs state,HIGH
-sbi TCCR1B,ICES1
+in tmp,TCCR1B
+cbi tmp,ICES1
+sbrs state,HIGH ; maybe toggle according to TCCR1B?
+sbi tmp,ICES1
+out TCCR1B,tmp
 
 ; return 
 ret
@@ -235,105 +244,126 @@ ret
 ; fwd_to_cam routine
 ; ------------------
 
+FWD_TO_CAM:
+
+; disable external interrupt 1 while toggling edge
+in tmp,GIMSK
+cbr tmp,INT1
+out GIMSK,tmp
+
 ; output state on port to cam
-mov tmp,state
-andi tmp,HIGH
-lsl tmp ; as we have to set pd3 (dirty, shorter way?)
+in tmp1,PORTD
+sbr tmp1,PD3
+sbrs state,HIGH_F
+cbr tmp1,PD3
+
+; configure as output and push-pull low/high
 sbi DDRD,DDD3
-out PORTD,tmp ; <- hunz: low or high if pd3 bit is set ?
+out PORTD,tmp1;
+
+; reenable external interrupt 1
+cbr tmp,INT1
+out GIMSK,tmp
 
 ; return
 ret
 
+; --------------------
+; prepare_uart routine
+; --------------------
 
-; zzZZzZzZZZ .... hier gehts weiter !!!
+PREPARE_UART:
 
-;
-; rec_cam routines
-;
+; by now just send state and  counter, so there is no data to prepare
+
+; enable uart data register empty interrupt
+sbi UCR,UDRIE
+
+; return
+ret
+
+
+; ---------------
+; rec_cam routine
+; ---------------
 
 REC_CAM:
 
-; decide what to do
-sbic PORTD,PD3
-rjmp REC_CAM_HIGH
-rjmp REC_CAM_LOW
+; first thing - pullup on
+cbi DDRD,DDD3
+sbi DDRD,PD3
 
-REC_CAM_HIGH:
+; save counter
+in counter_l,ICR1L
+in counter_h,ICR1H
 
-; output high on port to card
-sbi PORTD,PD6
+; toggle state
+eor state,state_m
+
+; toggle int sense
+rcall TOGGLE_INT_SENSE
 
-; toggle int1 sense
-in r16,MCUCR
-cbr r16,ISC10
-out MCUCR,r16
+HIER FEHLT NOCH VIEL ...
 
+; return
 reti
 
-REC_CAM_LOW:
+; ------------------------
+: toggle_int_sense routine
+; ------------------------
 
-; output low on port to card
-cbi PORTD,PD6
+TOGGLE_INT_SENSE:
 
-; toggle int 1 sense
-in r16,MCUCR
-sbr r16,ISC10
-out MCUCR,r16
+in tmp,MCUCR
+cbr tmp,ISC10
+sbis state,HIGH_F
+sbr tmp,ISC10
+out MCUCR,tmp
 
-reti
+; return
+ret
 
-;
+; -------------------
 ; t1_overflow routine
-;
+; -------------------
 
 T1_OVERFLOW:
 
-add r22,r1 ; inc counter overflow register
+; increment counter overflow
+add overflow_counter,one
 
+; return
 reti
 
-;
+; ---------------
 ; rst_cam routine
-;
+; ---------------
 
 RST_CAM:
 
-; decide what to do
-sbic PORTD,PD2
-rjmp RST_CAM_HIGH
-rjmp RST_CAM_LOW
-
-RST_CAM_HIGH:
+; pull down rst from card
+sbi DDRD,DDD4
+cbi PORTD,PD4
 
-; output high on rst port to card
-sbi PORTD,PD4
+; jump to init
+rjmp INIT
 
-; toggle int0 sense
-in r16,MCUCR
-cbr r16,ISC00
-out MCUCR,r16
+; ----------------
+; uart_out routine
+; ----------------
 
-reti
+UART_OUT:
 
-RST_CAM_LOW:
+; disable uart data register empty interrupt
+cbi UCR,UDRIE
 
-; output low on rst port to cam
-cbi PORTD,PD4
+; init counter
+mov address_l,zero
 
-; toggle int0 sense
-in r16,MCUCR
-sbr r16,ISC00
-out MCUCR,r16
+; send the data
+rcall UART_SEND
 
+; return
 reti
 
-;
-; uart_out routines
-;
-
-UART_OUT:
-
-;
-; hier weiter ...
-;
+.... wahhh ! zzZz