CROSS_TARGET = fwbc.hex fwflash.hex betty.hex
# betty deps
-BETTY_DEPS = buttons.o
+BETTY_DEPS = system.o uart.o buttons.o spi.o display.o
# all projects
all: $(HOST_TARGET) $(CROSS_TARGET)
*
*/
+/* includes */
#include "betty.h"
/*
* functions
*/
-void mmap_init(u8 memtype) {
-
- MEMMAP=memtype;
-}
-
-void pll_init(void) {
-
- /* configuration */
- PLLCFG=0x42; // multiplier = 3 (for cclk), dividor = 4 (for f_cco)
- PLLCON=0x03; // enable and set as clk source for the lpc
- /* feed sequence */
- PLLFEED=0xaa;
- PLLFEED=0x55;
- /* wait for lock */
- while(!(PLLSTAT&(1<<10)))
- continue;
-}
-
-void ext_mem_bank_init(void) {
-
- BCFG0=0x10000420; // flash 1
- BCFG1=0x00000c42; // lcd
- BCFG2=0x10000420; // flash 2
-}
-
-
-void pin_select_init() {
-
- /*
- * a[19:2] -> address lines
- */
-
- PINSEL2=0x0d6041d4;
-}
-
-void uart0_init(void) {
-
- /* select pins 0.0 and 0.1 as tx and rx */
- PINSEL0=(PINSEL0&~(0xf))|0x05; // pin select -> tx, rx
-
- /* configure uart0 */
- UART0_FCR=0x07; // enable fifo
- UART0_LCR=0x83; // set dlab + word length
- UART0_DLL=0x04; // br: 38400 @ 10/4 mhz
- UART0_DLM=0x00;
- UART0_LCR=0x03; // unset dlab
-}
-
-void uart0_send_string(char *txbuf) {
-
- int i;
-
- i=0;
-
- while(txbuf[i]) {
- UART0_THR=txbuf[i++];
- /* flush if tx buffer maximum reached */
- if(!(i%16))
- while(!(UART0_LSR&(1<<6)))
- continue;
- }
-
- /* flush if \n and \r do not fit in the tx buffer */
- if(i>14)
- while(!(UART0_LSR&(1<<6)))
- continue;
-
- UART0_THR='\n';
- UART0_THR='\r';
-
- /* flush uart0 anyways */
- while(!(UART0_LSR&(1<<6)))
- continue;
-}
-
-void uart0_send_buf16(u16 *buf,int len) {
-
- int i;
-
- i=0;
-
- for(i=0;i<len/2;i++) {
- if(!(i%8))
- while(!(UART0_LSR&(1<<6)))
- continue;
- UART0_THR=buf[i]&0xff;
- UART0_THR=(buf[i]>>8)&0xff;
- }
-}
-
-void uart0_send_buf32(u32 *buf,int len) {
-
- int i;
-
- i=0;
-
- for(i=0;i<len/4;i++) {
- if(!(i%4))
- while(!(UART0_LSR&(1<<6)))
- continue;
- UART0_THR=buf[i]&0xff;
- UART0_THR=(buf[i]>>8)&0xff;
- UART0_THR=(buf[i]>>16)&0xff;
- UART0_THR=(buf[i]>>24)&0xff;
- }
-}
-
-void uart0_send_byte(u8 send) {
-
- while(!(UART0_LSR&(1<<5)))
- continue;
-
- UART0_THR=send;
-}
-
-u8 uart0_get_byte(void) {
-
- u8 rx;
-
- while(!(UART0_LSR&(1<<0)))
- continue;
-
- rx=UART0_RBR;
-
- return rx;
-}
-
-void pause(int cnt) {
-
- while(cnt--)
- asm volatile ("nop");
-}
-
-void init_lcd(u8 s) {
-
- LCD_CMD=0xe1; // ?
- LCD_CMD=0xe2;
- pause(48000);
- LCD_CMD=0xab;
- LCD_CMD=0x27;
- LCD_CMD=0x81;
- LCD_CMD=0x3f;
- LCD_CMD=0x65;
- LCD_CMD=0x60;
- LCD_CMD=0x1c;
- LCD_CMD=0x61;
- LCD_CMD=0x0a;
- LCD_CMD=0x62;
- LCD_CMD=0x75;
- LCD_CMD=0x63;
- LCD_CMD=0x81;
- LCD_CMD=0x90;
- LCD_CMD=0x88;
- LCD_CMD=0x00;
- LCD_CMD=0x89;
- LCD_CMD=0x00;
- LCD_CMD=0x8a;
- LCD_CMD=0x33;
- LCD_CMD=0x8b;
- LCD_CMD=0x33;
- LCD_CMD=0x8c;
- LCD_CMD=0x66;
- LCD_CMD=0x8d;
- LCD_CMD=0x66;
- LCD_CMD=0x8e;
- LCD_CMD=0x99;
- LCD_CMD=0x8f;
- LCD_CMD=0x99;
- if(s) {
- LCD_CMD=0xa1;
- LCD_CMD=0xc0;
- }
- else {
- LCD_CMD=0xa0;
- LCD_CMD=0xc8;
- }
- LCD_CMD=0x2e;
- pause(48000);
- LCD_CMD=0x2f;
- LCD_CMD=0xa4;
- LCD_CMD=0xa6;
-}
-
-/*
- * spi0 stuff (+ cc1100)
- */
-
-#define SLAVE 0
-#define MASTER 1
-
-void spi1_init(u8 width,u8 type,u8 div) {
-
- if((width<8)|(width>16))
- width=8;
- if(width==16)
- width=0;
-
- div&=0xfe;
- if(div<8)
- div=8;
-
- S1SPCR=(1<<2)|(width<<8)|(type<<5);
- S1SPCCR=div;
-}
-
-#define cc1100_init spi1_init(8,MASTER,8)
-
-void spi1_send(u16 data) {
-
- S1SPDR=data;
-
- while(!(S1SPSR&(1<<7)))
- continue;
-}
-
-void bl_init(void) {
-
- IODIR0|=(1<<4);
-}
-
-void bl_toggle(void) {
-
- if(IOPIN0&(1<<4))
- IOCLR0=(1<<4);
- else
- IOSET0=(1<<4);
-}
-
-void bl_on(void) {
-
- IOCLR0=(1<<4);
-}
-
-void bl_off(void) {
-
- IOSET0=(1<<4);
-}
+#define cc1100_init spi1_init(8,SPI_MASTER,8)
/*
* main function
char buf[]="betty - live from flash at 0x80000000! ;)\r\n";
t_button button;
+ /* system init */
pll_init();
+
+ /* uart init */
uart0_init();
- ext_mem_bank_init();
- pin_select_init();
- init_lcd(0);
+
+ /* display init */
bl_init();
+
+ /* button init */
button_init(&button);
button_set_retries(&button,100);
- pause(0xffffff);
+ /*
+ * start it ...
+ */
+ pause(0xffffff);
bl_toggle();
while(1) {
// processor
#include "lpc2xxx.h"
+// types
+#include "types.h"
+
// api
+#include "system.h"
+#include "uart.h"
#include "buttons.h"
-
+#include "spi.h"
+#include "display.h"
/*
* defines
#define LCD_CMD (*((volatile unsigned char *)(BANK1)))
#define LCD_DATA (*((volatile unsigned char *)(BANK1+1)))
-/*
- * type definitions
- */
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned int u32;
-typedef unsigned long long int u64;
-
/*
* function prototypes
*/
#define BUTTONS_H
/* includes */
-#include "betty.h"
+#include "lpc2xxx.h"
+#include "types.h"
/* defines */
#define BUTTON_MAX 8
--- /dev/null
+/*
+ * display.c - handling the display
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#include "display.h"
+
+/*
+ * functions
+ */
+
+void bl_init(void) {
+
+ PINSEL0&=~(1<<9|(1<<8));
+ IODIR0|=(1<<4);
+}
+
+void bl_toggle(void) {
+
+ if(IOPIN0&(1<<4))
+ IOCLR0=(1<<4);
+ else
+ IOSET0=(1<<4);
+}
+
+void bl_on(void) {
+
+ IOCLR0=(1<<4);
+}
+
+void bl_off(void) {
+
+ IOSET0=(1<<4);
+}
+
--- /dev/null
+/*
+ * display.h - header file for the display handling
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#ifndef DISPLAY_H
+#define DISPLAY_H
+
+#include "lpc2xxx.h"
+#include "types.h"
+
+/* function prototypes */
+void bl_init(void);
+void bl_toggle(void);
+void bl_on(void);
+void bl_off(void);
+
+#endif
--- /dev/null
+/*
+ * spi.c - serial peripheral interface 0/1
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#include "spi.h"
+
+/*
+ * functions
+ */
+
+void spi1_init(u8 width,u8 type,u8 div) {
+
+ if((width<8)|(width>16))
+ width=8;
+ if(width==16)
+ width=0;
+
+ div&=0xfe;
+ if(div<8)
+ div=8;
+
+ S1SPCR=(1<<2)|(width<<8)|(type<<5);
+ S1SPCCR=div;
+}
+
+void spi1_send(u16 data) {
+
+ S1SPDR=data;
+
+ while(!(S1SPSR&(1<<7)))
+ continue;
+}
--- /dev/null
+/*
+ * spi-h - spi header file
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#ifndef SPI_H
+#define SPI_H
+
+#include "lpc2xxx.h"
+#include "types.h"
+
+/* defines */
+#define SPI_MASTER (1<<0)
+#define SPI_SLAVE (1<<1)
+
+/* function prototypes */
+void spi1_init(u8 width,u8 type,u8 div);
+void spi1_send(u16 data);
+
+#endif
--- /dev/null
+/*
+ * system.c - misc system specific stuff
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#include "system.h"
+
+/*
+ * functions
+ */
+
+void mmap_init(u8 memtype) {
+
+ MEMMAP=memtype;
+}
+
+void pll_init(void) {
+
+ /* configuration */
+ PLLCFG=0x42; // multiplier = 3 (for cclk), dividor = 4 (for f_cco)
+ PLLCON=0x03; // enable and set as clk source for the lpc
+
+ /* feed sequence */
+ PLLFEED=0xaa;
+ PLLFEED=0x55;
+
+ /* wait for lock */
+ while(!(PLLSTAT&(1<<10)))
+ continue;
+}
+
+void pause(int cnt) {
+
+ while(cnt--)
+ asm volatile ("nop");
+}
+
--- /dev/null
+/*
+ * system.h - header file for misc system specific stuff
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#ifndef SYSTEM_H
+#define SYSTEM_H
+
+#include "lpc2xxx.h"
+#include "types.h"
+
+/* function prototypes */
+void mmap_init(u8 memtype);
+void pll_init(void);
+void pause(int cnt);
+
+#endif
--- /dev/null
+/*
+ * uart.c - uart0/1 api
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#include "uart.h"
+
+/*
+ * functions
+ */
+
+void uart0_init(void) {
+
+ /* select pins 0.0 and 0.1 as tx and rx */
+ PINSEL0=(PINSEL0&~(0xf))|0x05;
+
+ /* configure uart 0 */
+ UART0_FCR=0x07; // enable fifo
+ UART0_LCR=0x83; // set dlab + word length
+ UART0_DLL=0x04; // br: 115200
+ UART0_DLM=0x00;
+ UART0_LCR=0x03; // unset dlab
+}
+
+void uart0_send_string(char *txbuf) {
+
+ int i;
+
+ i=0;
+
+ while(txbuf[i]) {
+ UART0_THR=txbuf[i++];
+ /* flush if tx buffer maximum reached */
+ if(!(i%16))
+ while(!(UART0_LSR&(1<<6)))
+ continue;
+ }
+
+ /* flush if \n and \r do not fit in the tx buffer */
+ if(i>14)
+ while(!(UART0_LSR&(1<<6)))
+ continue;
+
+ UART0_THR='\n';
+ UART0_THR='\r';
+
+ /* flush uart0 anyways */
+ while(!(UART0_LSR&(1<<6)))
+ continue;
+}
+
+void uart0_send_buf16(u16 *buf,int len) {
+
+ int i;
+
+ i=0;
+
+ for(i=0;i<len/2;i++) {
+ if(!(i%8))
+ while(!(UART0_LSR&(1<<6)))
+ continue;
+ UART0_THR=buf[i]&0xff;
+ UART0_THR=(buf[i]>>8)&0xff;
+ }
+}
+
+void uart0_send_buf32(u32 *buf,int len) {
+
+ int i;
+
+ i=0;
+
+ for(i=0;i<len/4;i++) {
+ if(!(i%4))
+ while(!(UART0_LSR&(1<<6)))
+ continue;
+ UART0_THR=buf[i]&0xff;
+ UART0_THR=(buf[i]>>8)&0xff;
+ UART0_THR=(buf[i]>>16)&0xff;
+ UART0_THR=(buf[i]>>24)&0xff;
+ }
+}
+
+void uart0_send_byte(u8 send) {
+
+ while(!(UART0_LSR&(1<<5)))
+ continue;
+
+ UART0_THR=send;
+}
+
+u8 uart0_get_byte(void) {
+
+ u8 rx;
+
+ while(!(UART0_LSR&(1<<0)))
+ continue;
+
+ rx=UART0_RBR;
+
+ return rx;
+}
+
--- /dev/null
+/*
+ * uart.h - uart0/1 api header file
+ *
+ * author: hackbard@hackdaworld.org
+ *
+ */
+
+#ifndef UART_H
+#define UART_H
+
+#include "lpc2xxx.h"
+#include "types.h"
+
+/* function prototypes */
+void uart0_init(void);
+void uart0_send_string(char *txbuf);
+void uart0_send_buf16(u16 *buf,int len);
+void uart0_send_buf32(u32 *buf,int len);
+void uart0_send_byte(u8 send);
+u8 uart0_get_byte(void);
+
+#endif
projects / my-code / arm.git / commitdiff