From: hackbard <hackbard@staubsauger.localdomain>
Date: Fri, 31 Aug 2007 18:17:38 +0000 (+0200)
Subject: still some bugs, though by setting pll mult -> br of 115200
X-Git-Url: https://hackdaworld.org/gitweb/?p=my-code%2Farm.git;a=commitdiff_plain;h=ed474ffa00e2e35babccb09d039a7a65939097a0

still some bugs, though by setting pll mult -> br of 115200
---

diff --git a/betty/fwflash.c b/betty/fwflash.c
index 4fa0479..3023789 100644
--- a/betty/fwflash.c
+++ b/betty/fwflash.c
@@ -22,7 +22,7 @@
 #define BANK2			0x82000000
 #define BANK_SIZE		0x00100000
 #define BOOTLOADER		0x7fffe000
-#define BL_SIZE			0x00000800
+#define BL_SIZE			0x00002000
 
 /* flash cmd addresses - flash[0-18] <--> arm[1-19]*/
 #define B0F555	(*((volatile unsigned long *)(BANK0|0xaaa)))	// 0x555
@@ -54,12 +54,24 @@ void mmap_init(u8 memtype) {
 	MEMMAP=memtype;
 }
 
+void pll_init(void) {
+
+	/* configuration */
+	PLLCFG=0x02;		// multiplier = 2
+	PLLCON=0x03;		// enable and set as clk source for the lpc
+	/* feed sequence */
+	PLLFEED=0xaa;
+	PLLFEED=0x55;
+	/* wait for lock */
+	while(!(PLLSTAT&(1<<10)))
+		continue;
+}
+
 void uart0_init(void) {
 
 	PINSEL0=0x05;			// pin select -> tx, rx
 	UART0_FCR=0x07;			// enable fifo
 	UART0_LCR=0x83;			// set dlab + word length
-	//UART0_DLL=0x10;			// br: 9600 @ 10/4 mhz
 	UART0_DLL=0x04;			// br: 38400 @ 10/4 mhz
 	UART0_DLM=0x00;
 	UART0_LCR=0x03;			// unset dlab
@@ -161,6 +173,9 @@ int main(void) {
 	/* memory mapping of interrupt vectors to static ram */
 
 	//mmap_init(MMAP_RAM);
+	
+	/* pll initialization */
+	pll_init();
 
 	/* uart initialization */
 	uart0_init();
diff --git a/betty/lpcload.c b/betty/lpcload.c
index f7911a8..19d5a5b 100644
--- a/betty/lpcload.c
+++ b/betty/lpcload.c
@@ -26,7 +26,7 @@
 #define BANK2_ADDR		0x82000000
 #define BANK_SIZE		0x00100000
 #define BL_ADDR			0x7fffe000
-#define BL_SIZE			0x00000800
+#define BL_SIZE			0x00002000
 
 #define CMD_READ		'R'		// stay compatible to fwflash!
 
@@ -128,7 +128,6 @@ int open_serial_device(t_lpc *lpc) {
 
 	// input options -> enable flow control
 	
-	//term.c_iflag&=~(IXON|IXOFF|IXANY|INLCR|ICRNL);
 	term.c_iflag&=~(INLCR|ICRNL|IXANY);
 	term.c_iflag|=(IXON|IXOFF);
 	
@@ -139,15 +138,38 @@ int open_serial_device(t_lpc *lpc) {
 	// more control options -> timeout / flow control
 	
 	term.c_cc[VMIN]=0;
-	term.c_cc[VTIME]=10;	// 1 second timeout
-	term.c_cc[VSTART]=0x11;
-	term.c_cc[VSTOP]=0x13;
+	term.c_cc[VTIME]=20;	// 2 seconds timeout
+	//term.c_cc[VSTART]=0x11;
+	//term.c_cc[VSTOP]=0x13;
 
 	tcsetattr(lpc->sfd,TCSANOW,&term);
 
 	return lpc->sfd;
 }
 
+int reconfig_serial_device(t_lpc *lpc) {
+
+	struct termios term;
+	int ret;
+
+	/* reconfigure the serial device for our lousy loader tool */
+
+	tcgetattr(lpc->sfd,&term);
+
+	// disable flow control
+	
+	term.c_iflag&=~(IXON|IXOFF|IXANY|INLCR|ICRNL);
+
+	// change baudrate
+
+	cfsetispeed(&term,B115200);
+	cfsetospeed(&term,B115200);
+
+	ret=tcsetattr(lpc->sfd,TCSANOW,&term);
+
+	return ret;
+}
+
 int open_firmware(t_lpc *lpc) {
 
 	/* open firmware file */
@@ -670,7 +692,7 @@ int main(int argc,char **argv) {
 					break;
 				}
 				else if(argv[i][2]=='b') {
-					lpc.info|=BANK0;
+					lpc.info|=BL;
 					strncpy(lpc.bl,argv[++i],127);
 					break;
 				}
@@ -724,6 +746,10 @@ int main(int argc,char **argv) {
 	/* flush the lpc2220 tx buf */
 	lpc_txbuf_flush(&lpc);
 
+	/* reconfigure the serial port */
+	if(reconfig_serial_device(&lpc)<0)
+		goto end;
+
 	/* download flash/bootloader content */
 	if(lpc.info&BANK0)
 		dump_files(lpc.sfd,lpc.b0fd,BANK0_ADDR,BANK_SIZE);