The interstitial atom positions are displayed in figure \ref{fig:defects:ins_pos}.
In seperated simulation runs the silicon or carbon atom is inserted at the
\begin{itemize}
- \item tetrahedral, $\vec{p}=(0,0,0)$, ({\color{red}$\bullet$})
- \item hexagonal, $\vec{p}=(-1/8,-1/8,1/8)$, ({\color{green}$\bullet$})
- \item nearly \hkl<1 0 0> dumbbell, $\vec{p}=(-1/4,-1/4,-1/8)$, ({\color{yellow}$\bullet$})
- \item nearly \hkl<1 1 0> dumbbell, $\vec{p}=(-1/8,-1/8,-1/4)$, ({\color{magenta}$\bullet$})
- \item bond-centered, $\vec{p}=(-1/8,-1/8,-3/8)$, ({\color{cyan}$\bullet$})
+ \item tetrahedral, $\vec{r}=(0,0,0)$, ({\color{red}$\bullet$})
+ \item hexagonal, $\vec{r}=(-1/8,-1/8,1/8)$, ({\color{green}$\bullet$})
+ \item nearly \hkl<1 0 0> dumbbell, $\vec{r}=(-1/4,-1/4,-1/8)$, ({\color{yellow}$\bullet$})
+ \item nearly \hkl<1 1 0> dumbbell, $\vec{r}=(-1/8,-1/8,-1/4)$, ({\color{magenta}$\bullet$})
+ \item bond-centered, $\vec{r}=(-1/8,-1/8,-3/8)$, ({\color{cyan}$\bullet$})
\end{itemize}
interstitial position.
For the dumbbell configurations the nearest silicon atom is displaced by $(0,0,-1/8)$ and $(-1/8,-1/8,0)$ respectively of the unit cell length to avoid too high forces.
\end{equation}
where $E$ is the free energy of the interstitial system and $N_i$ and $\mu_i$ are the amount of atoms and the chemical potential of species $i$.
The chemical potential is determined by the cohesive energy of the structure of the specific type in equilibrium at zero Kelvin.
-For a defect configuration of a single atom species equation \ref{eq:defects:ef2} is equivalent to equation \ref{eq:defects:ef1}.
+For a defect configuration of a single atom species equation \eqref{eq:defects:ef2} is equivalent to equation \eqref{eq:defects:ef1}.
\section{Silicon self-interstitials}
\hline
& T & H & \hkl<1 0 0> DB & \hkl<1 1 0> DB & V \\
\hline
- Erhard/Albe MD & 3.40 & unstable & 5.42 & 4.39 & 3.13 \\
+ Erhard/Albe MD & 3.40 & 4.48$^*$ & 5.42 & 4.39 & 3.13 \\
VASP & 3.77 & 3.42 & 4.41 & 3.39 & 3.63 \\
LDA \cite{leung99} & 3.43 & 3.31 & - & 3.31 & - \\
GGA \cite{leung99} & 4.07 & 3.80 & - & 3.84 & - \\
\hline
\end{tabular}
\end{center}
-\caption[Formation energies of silicon self-interstitials in crystalline silicon determined by classical potential molecular dynamics and density functional calculations.]{Formation energies of silicon self-interstitials in crystalline silicon determined by classical potential molecular dynamics and density functional calculations. The formation energies are given in eV. T denotes the tetrahedral, H the hexagonal, B the bond-centered and V the vacancy interstitial configuration. The dumbbell configurations are abbreviated by DB.}
+\caption[Formation energies of silicon self-interstitials in crystalline silicon determined by classical potential molecular dynamics and density functional calculations.]{Formation energies of silicon self-interstitials in crystalline silicon determined by classical potential molecular dynamics and density functional calculations. The formation energies are given in eV. T denotes the tetrahedral, H the hexagonal, B the bond-centered and V the vacancy interstitial configuration. The dumbbell configurations are abbreviated by DB. Formation energies for unstable configurations are marked by an asterisk and determined by using the low kinetic energy configuration shortly before the relaxation into the more favorable configuration starts.}
\label{tab:defects:si_self}
\end{table}
The final configurations obtained after relaxation are presented in figure \ref{fig:defects:conf}.
\begin{figure}[h]
\begin{center}
-\hrule
-\vspace*{0.2cm}
+%\hrule
+%\vspace*{0.2cm}
+%\begin{flushleft}
+%\begin{minipage}{5cm}
+%\underline{\hkl<1 1 0> dumbbell}\\
+%$E_{\text{f}}=3.39\text{ eV}$\\
+%\includegraphics[width=3.0cm]{si_pd_vasp/110_2333.eps}
+%\end{minipage}
+%\begin{minipage}{5cm}
+%\underline{Hexagonal}\\
+%$E_{\text{f}}=3.42\text{ eV}$\\
+%\includegraphics[width=3.0cm]{si_pd_vasp/hex_2333.eps}
+%\end{minipage}
+%\begin{minipage}{5cm}
+%\underline{Tetrahedral}\\
+%$E_{\text{f}}=3.77\text{ eV}$\\
+%\includegraphics[width=3.0cm]{si_pd_vasp/tet_2333.eps}
+%\end{minipage}\\[0.2cm]
+%\begin{minipage}{5cm}
+%\underline{\hkl<1 0 0> dumbbell}\\
+%$E_{\text{f}}=4.41\text{ eV}$\\
+%\includegraphics[width=3.0cm]{si_pd_vasp/100_2333.eps}
+%\end{minipage}
+%\begin{minipage}{5cm}
+%\underline{Vacancy}\\
+%$E_{\text{f}}=3.63\text{ eV}$\\
+%\includegraphics[width=3.0cm]{si_pd_vasp/vac_2333.eps}
+%\end{minipage}
+%\begin{minipage}{5cm}
+%\begin{center}
+%VASP\\
+%calculations\\
+%\end{center}
+%\end{minipage}
+%\end{flushleft}
+%\vspace*{0.2cm}
+%\hrule
\begin{flushleft}
\begin{minipage}{5cm}
-\underline{\hkl<1 1 0> dumbbell}\\
-$E_{\text{f}}=3.39\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_vasp/110_2333.eps}
-\end{minipage}
-\begin{minipage}{5cm}
-\underline{Hexagonal}\\
-$E_{\text{f}}=3.42\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_vasp/hex_2333.eps}
-\end{minipage}
-\begin{minipage}{5cm}
\underline{Tetrahedral}\\
-$E_{\text{f}}=3.77\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_vasp/tet_2333.eps}
-\end{minipage}\\[0.2cm]
-\begin{minipage}{5cm}
-\underline{\hkl<1 0 0> dumbbell}\\
-$E_{\text{f}}=4.41\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_vasp/100_2333.eps}
+$E_{\text{f}}=3.40\text{ eV}$\\
+\includegraphics[width=4.0cm]{si_pd_albe/tet.eps}
\end{minipage}
-\begin{minipage}{5cm}
-\underline{Vacancy}\\
-$E_{\text{f}}=3.63\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_vasp/vac_2333.eps}
+\begin{minipage}{10cm}
+\underline{Hexagonal}\\[0.1cm]
+\begin{minipage}{4cm}
+$E_{\text{f}}^*=4.48\text{ eV}$\\
+\includegraphics[width=4.0cm]{si_pd_albe/hex_a.eps}
\end{minipage}
-\begin{minipage}{5cm}
+\begin{minipage}{0.8cm}
\begin{center}
-VASP\\
-calculations\\
+$\Rightarrow$
\end{center}
\end{minipage}
-\end{flushleft}
-\vspace*{0.2cm}
-\hrule
-\begin{flushleft}
-\begin{minipage}{5cm}
-\underline{\hkl<1 1 0> dumbbell}\\
-$E_{\text{f}}=3.39\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_albe/110.eps}
-\end{minipage}
-\begin{minipage}{5cm}
-\underline{Hexagonal}\\
-$E_{\text{f}}=3.42\text{ eV}$\\
+\begin{minipage}{4cm}
+$E_{\text{f}}=3.96\text{ eV}$\\
\includegraphics[width=4.0cm]{si_pd_albe/hex.eps}
\end{minipage}
-\begin{minipage}{5cm}
-\underline{Tetrahedral}\\
-$E_{\text{f}}=3.77\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_albe/tet.eps}
\end{minipage}\\[0.2cm]
\begin{minipage}{5cm}
\underline{\hkl<1 0 0> dumbbell}\\
-$E_{\text{f}}=4.41\text{ eV}$\\
+$E_{\text{f}}=5.42\text{ eV}$\\
\includegraphics[width=4.0cm]{si_pd_albe/100.eps}
\end{minipage}
\begin{minipage}{5cm}
-\underline{Vacancy}\\
-$E_{\text{f}}=3.63\text{ eV}$\\
-\includegraphics[width=4.0cm]{si_pd_albe/vac.eps}
+\underline{\hkl<1 1 0> dumbbell}\\
+$E_{\text{f}}=4.39\text{ eV}$\\
+\includegraphics[width=4.0cm]{si_pd_albe/110.eps}
\end{minipage}
\begin{minipage}{5cm}
-\begin{center}
-Erhard/Albe potential\\
-calculations\\
-\end{center}
+\underline{Vacancy}\\
+$E_{\text{f}}=3.13\text{ eV}$\\
+\includegraphics[width=4.0cm]{si_pd_albe/vac.eps}
\end{minipage}
\end{flushleft}
-\hrule
+%\hrule
\end{center}
-\caption[Relaxed silicon self-interstitial defect configurations.]{Relaxed silicon self-interstitial defect configurations. The silicon atoms and the bonds (only for the interstitial atom) are illustrated by yellow spheres and blue lines.}
+\caption[Relaxed silicon self-interstitial defect configurations obtained by classical potential calculations.]{Relaxed silicon self-interstitial defect configurations obtained by classical potential calculations. The silicon atoms and the bonds (only for the interstitial atom) are illustrated by yellow spheres and blue lines.}
\label{fig:defects:conf}
\end{figure}
Among the established analytical potentials only the EDIP \cite{} and Stillinger-Weber \cite{} potential reproduce the correct order in energy of the defects.
However, these potenitals show shortcomings concerning the description of other physical properties and are unable to describe the C-C and C-Si interaction.
In fact the Erhard/Albe potential calculations favor the tetrahedral defect configuration.
-The hexagonal configuration is not stable opposed to results of the authors of the potential \cite{}.
-The Si interstitial atom moves towards an energetically more favorable position very close to the tetrahedral one but slightly displaced along the three coordinate axes.
-The formation energy of 3.96 eV for this type of interstitial is equal to the result for the hexagonal one in the original work \cite{}.
+The hexagonal configuration is not stable opposed to results of the authors of the potential \cite{albe_sic_pot}.
+In the first two pico seconds while kinetic energy is decoupled from the system the Si interstitial seems to condense at the hexagonal site.
+The formation energy of 4.48 eV is determined by this low kinetic energy configuration shortly before the relaxation process starts.
+The Si interstitial atom then begins to slowly move towards an energetically more favorable position very close to the tetrahedral one but slightly displaced along the three coordinate axes.
+The formation energy of 3.96 eV for this type of interstitial is equal to the result for the hexagonal one in the original work \cite{albe_sic_pot}.
Obviously the authors did not carefully check the relaxed results assuming a hexagonal configuration.
+In figure \ref{fig:defects:kin_si_hex} the relaxation process is shown on the basis of the kinetic energy plot.
+\begin{figure}[h]
+\begin{center}
+\includegraphics[width=10cm]{e_kin_si_hex.ps}
+\end{center}
+\caption{Kinetic energy plot of the relaxation process of the hexagonal silicon self-interstitial defect simulation using the Erhard/Albe classical potential.}
+\label{fig:defects:kin_si_hex}
+\end{figure}
To exclude failures in the implementation of the potential or the MD code itself the hexagonal defect structure was double-checked with the PARCAS MD code \cite{}.
The same type of interstitial arises using random insertions.
In addition, variations exist in which the displacement is only along two \hkl<1 0 0> axes ($E_\text{f}=3.8\text{ eV}$) or along a single \hkl<1 0 0> axes ($E_\text{f}=3.6\text{ eV}$) successively approximating the tetdrahedral configuration and formation energy.
-The existence of these local minima located near the tetrahedral configuration seems to be an artefact of the analytical potential without physical authenticity revealing basic problems of analytical potential models for describing defect structures.
+The existence of these local minima located near the tetrahedral configuration seems to be an artifact of the analytical potential without physical authenticity revealing basic problems of analytical potential models for describing defect structures.
However, the energy barrier is small (DAS MAL DURCHRECHNEN).
-Hence these artefacts should have a negligent influence in finite temperature simulations.
+Hence these artifacts should have a negligent influence in finite temperature simulations.
The bond-centered configuration is unstable and the \hkl<1 0 0> dumbbell interstitial is the most unfavorable configuration for both, the Erhard/Albe and VASP calculations.
+In the case of the classical potential simulations bonds between atoms are displayed if there is an interaction according to the potential model, that is if the distance of two atoms is within the cutoff region $S_{ij}$ introduced in equation \eqref{eq:basics:fc}.
+For the tetrahedral and the slightly displaced configurations four bonds to the atoms located in the center of the planes of the unit cell exist in addition to the four tetrahedral bonds.
+The length of these bonds are, however, close to the cutoff range and thus are weak interactions not constituting actual chemical bonds.
+The same applies to the bonds between the interstitial and the upper two atoms in the \hkl<1 1 0> dumbbell configuration.
+
+A more detailed description of the chemical bonding is achieved by quantum-mechanical calculations by investigating the accumulation of negative charge between the nuclei.
+Todo: Plot the electron density for these types of defect to derive conclusions of existing bonds ...
\section{Carbon related point defects}
+Carbon is a common and technologically important impurity in silicon.
+Concentrations as high as $10^{18}\text{ cm}^{-3}$ occur in Czochralski-grown silicon samples.
+It is well established that carbon and other isovalent impurities prefer to dissolve substitutionally in silicon.
+However, radiation damage can generate carbon interstitials \cite{watkins76} which have enough mobility at room temeprature to migrate and form defect complexes.
+
+Formation energies of the most common carbon point defects in crystalline silicon are summarized in table \ref{tab:defects:c_ints} and the relaxed configurations obtained by classical potential calculations visualized in figure \ref{fig:defects:c_conf}.
+The type of reservoir of the carbon impurity to determine the formation energy of the defect was chosen to be SiC.
+This is consistent with the methods used in the articles \cite{tersoff90,dal_pino93}, which the results are compared to in the following.
+Hence, the chemical potential of silicon and carbon is determined by the cohesive energy of silicon and silicon carbide.
+\begin{table}[h]
+\begin{center}
+\begin{tabular}{l c c c c c c}
+\hline
+\hline
+ & T & H & \hkl<1 0 0> DB & \hkl<1 1 0> DB & S & B \\
+\hline
+ Erhard/Albe MD & 6.09 & 9.05$^*$ & 3.88 & 5.18 & 0.75 & 5.59$^*$ \\
+ %VASP & unstable & unstable & 3.15 & 3.60 & 1.39 & 4.10 \\
+ VASP & unstable & unstable & 3.72 & 4.16 & 1.95 & 4.66 \\
+ Tersoff \cite{tersoff90} & 3.8 & 6.7 & 4.6 & 5.9 & 1.6 & 5.3 \\
+ ab initio & - & - & x & - & 1.89 \cite{dal_pino93} & x+2.1 \cite{capaz94} \\
+\hline
+\hline
+\end{tabular}
+\end{center}
+\caption[Formation energies of carbon point defects in crystalline silicon determined by classical potential molecular dynamics and density functional calculations.]{Formation energies of carbon point defects in crystalline silicon determined by classical potential molecular dynamics and density functional calculations. The formation energies are given in eV. T denotes the tetrahedral, H the hexagonal, B the bond-centered and S the substitutional interstitial configuration. The dumbbell configurations are abbreviated by DB. Formation energies for unstable configurations are marked by an asterisk and determined by using the low kinetic energy configuration shortly before the relaxation into the more favorable configuration starts.}
+\label{tab:defects:c_ints}
+\end{table}
+\begin{figure}[h]
+\begin{center}
+\begin{flushleft}
+\begin{minipage}{4cm}
+\underline{Hexagonal}\\
+$E_{\text{f}}^*=9.05\text{ eV}$\\
+\includegraphics[width=4.0cm]{c_pd_albe/hex.eps}
+\end{minipage}
+\begin{minipage}{0.8cm}
+\begin{center}
+$\Rightarrow$
+\end{center}
+\end{minipage}
+\begin{minipage}{4cm}
+\underline{\hkl<1 0 0>}\\
+$E_{\text{f}}=3.96\text{ eV}$\\
+\includegraphics[width=4.0cm]{c_pd_albe/100.eps}
+\end{minipage}
+\begin{minipage}{0.5cm}
+\hfill
+\end{minipage}
+\begin{minipage}{5cm}
+\underline{Tetrahedral}\\
+$E_{\text{f}}=6.09\text{ eV}$\\
+\includegraphics[width=4.0cm]{c_pd_albe/tet.eps}
+\end{minipage}\\[0.2cm]
+\begin{minipage}{4cm}
+\underline{Bond-centered}\\
+$E_{\text{f}}^*=5.59\text{ eV}$\\
+\includegraphics[width=4.0cm]{c_pd_albe/bc.eps}
+\end{minipage}
+\begin{minipage}{0.8cm}
+\begin{center}
+$\Rightarrow$
+\end{center}
+\end{minipage}
+\begin{minipage}{4cm}
+\underline{\hkl<1 1 0> dumbbell}\\
+$E_{\text{f}}=5.18\text{ eV}$\\
+\includegraphics[width=4.0cm]{c_pd_albe/110.eps}
+\end{minipage}
+\begin{minipage}{0.5cm}
+\hfill
+\end{minipage}
+\begin{minipage}{5cm}
+\underline{Substitutional}\\
+$E_{\text{f}}=0.75\text{ eV}$\\
+\includegraphics[width=4.0cm]{c_pd_albe/sub.eps}
+\end{minipage}
+\end{flushleft}
+\end{center}
+\caption[Relaxed carbon point defect configurations obtained by classical potential calculations.]{Relaxed carbon point defect configurations obtained by classical potential calculations. The silicon/carbon atoms and the bonds (only for the interstitial atom) are illustrated by yellow/grey spheres and blue lines.}
+\label{fig:defects:c_conf}
+\end{figure}
+
+Substitutional carbon in silicon is found to be the lowest configuration in energy for all potential models.
+An experiemntal value of the formation energy of substitutional carbon was determined by a fit to solubility data yielding a concentration of $3.5 \times 10^{24} \exp{(-2.3\text{ eV}/k_{\text{B}}T)} \text{ cm}^{-3}$ \cite{bean71}.
+However, there is no particular reason for treating the prefactor as a free parameter in the fit to the experimental data.
+It is simply given by the atomic density of pure silicon, which is $5\times 10^{22}\text{ cm}^{-3}$.
+Tersoff \cite{tersoff90} and Dal Pino et al. \cite{dal_pino93} pointed out that by combining this prefactor with the calculated values for the energy of formation ranging from 1.6 to 1.89 eV an excellent agreement with the experimental solubility data within the entire temeprature range of the experiment is obtained.
+This reinterpretation of the solubility data, first proposed by Tersoff and later on reinforced by Dal Pino et al. is in good agreement with the results of the quantum-mechanical calculations performed in this work.
+Unfortunately the Erhard/Albe potential undervalues the formation energy roughly by a factor of two.
+
+Except for Tersoff's tedrahedral configuration results the \hkl<1 0 0> dumbbell is the energetically most favorable interstital configuration.
+The low energy of formation for the tetrahedral interstitial in the case of the Tersoff potential is believed to be an artifact of the abrupt cutoff set to 2.5 \AA{} (see ref. 11 and 13 in \cite{tersoff90}) and the real formation energy is, thus, supposed to be located between 3 and 10 eV.
+Keeping these considerations in mind, the \hkl<1 0 0> dumbbell is the most favorable interstitial configuration for all interaction models.
+In addition to the theoretical results compared to in table \ref{tab:defects:c_ints} there is experimental evidence of the existence of this configuration \cite{watkins76}.
+It is frequently generated in the classical potential simulation runs in which carbon is inserted at random positions in the c-Si matrix.
+In quantum-mechanical simulations the unstable tetrahedral and hexagonal configurations undergo a relaxation into the \hkl<1 0 0> dumbbell configuration.
+Thus, this configuration is of great importance and discussed in more detail in section \ref{subsection:100db}.
+
+The highest energy is observed for the hexagonal interstitial configuration using classical potentials.
+Quantum-mechanical calculations reveal this configuration to be unstable, which is also reproduced by the Erhard/Albe potential.
+In both cases a relaxation towards the \hkl<1 0 0> dumbbell configuration is observed.
+In fact the stability of the hexagonal interstitial could not be reproduced in simulations performed in this work using the unmodifed Tersoff potential parameters.
+Unfortunately, apart from the modified parameters, no more conditions specifying the relaxation process are given in Tersoff's study on carbon point defects in silicon \cite{tersoff90}.
+
+The tetrahedral is the second most unfavorable interstitial configuration using classical potentials and keeping in mind the abrupt cutoff effect in the case of the Tersoff potential as discussed earlier.
+Again, quantum-mechanical results reveal this configuration unstable.
+The fact that the tetrahedral and hexagonal configurations are the two most unstable configurations in classical potential calculations and, thus, are less likely to arise in MD simulations acts in concert with the fact that these configurations are found to be unstable in the more accurate quantum-mechanical calculations.
+
+Just as for the Si self-interstitial a carbon \hkl<1 1 0> dumbbell configuration exists.
+For the Erhard/Albe potential the formation energy is situated in the same order as found by quantum-mechanical results.
+Similar structures arise in both types of simulations with the silicon and carbon atom sharing a silicon lattice site aligned along \hkl[1 1 0] where the carbon atom is localized slightly closer to the next nearest silicon atom located in the opposite direction to the site-sharing silicon atom even forming a bond to the next but one silicon atom in this direction.
+
+The bond-centered configuration is unstable for the Erhard/Albe potential.
+The system moves into the \hkl<1 1 0> interstitial configuration.
+This, like in the hexagonal case, is also true for the unmodified Tersoff potential and the given relaxation conditions.
+Quantum-mechanical results of this configuration are discussed in more detail in section \ref{subsection:bc}.
+In another ab inito study Capaz et al. \cite{capaz94} determined this configuration as an intermediate saddle point structure of a possible migration path, which is 2.1 eV higher than the \hkl<1 0 0> dumbbell configuration.
+In calculations performed in this work the bond-centered configuration in fact is a real local minimum and an energy barrier is needed to reach this configuration starting from the \hkl<1 0 0> dumbbell configuration, which is discussed in section \ref{subsection:100mig}.
+
+\subsection[\hkl<1 0 0> dumbbell interstitial configuration]{\boldmath\hkl<1 0 0> dumbbell interstitial configuration}
+\label{subsection:100db}
+
+As the \hkl<1 0 0> dumbbell interstitial is the lowest configuration in energy it is the most probable hence important interstitial configuration of carbon in silicon.
+It was first identified by infra-red (IR) spectroscopy \cite{bean70} and later on by electron paramagnetic resonance (EPR) spectroscopy \cite{watkins76}.
+
+Figure \ref{fig:defects:100db_cmp} schematically shows the \hkl<1 0 0> dumbbell structure and table \ref{tab:defects:100db_cmp} lists the details of the atomic displacements, distances and bond angles obtained by analytical potential and quantum-mechanical calculations.
+For comparison, the obtained structures for both methods visualized out of the atomic position data are presented in figure \ref{fig:defects:100db_vis_cmp}.
+\begin{figure}[h]
+\begin{center}
+\includegraphics[width=12cm]{100-c-si-db_cmp.eps}
+\end{center}
+\caption[Sketch of the \hkl<1 0 0> dumbbell structure.]{Sketch of the \hkl<1 0 0> dumbbell structure. Atomic displacements, distances and bond angles are listed in table \ref{tab:defects:100db_cmp}.}
+\label{fig:defects:100db_cmp}
+\end{figure}
+%
+\begin{table}[h]
+\begin{center}
+Displacements\\
+\begin{tabular}{l c c c c c c c c c}
+\hline
+\hline
+ & & & & \multicolumn{3}{c}{Atom 2} & \multicolumn{3}{c}{Atom 3} \\
+ & $a$ & $b$ & $|a|+|b|$ & $\Delta x$ & $\Delta y$ & $\Delta z$ & $\Delta x$ & $\Delta y$ & $\Delta z$ \\
+\hline
+Erhard/Albe & 0.084 & -0.091 & 0.175 & -0.015 & -0.015 & -0.031 & -0.014 & 0.014 & 0.020 \\
+VASP & 0.109 & -0.065 & 0.174 & -0.011 & -0.011 & -0.024 & -0.014 & 0.014 & 0.025 \\
+\hline
+\hline
+\end{tabular}\\[0.5cm]
+\end{center}
+\begin{center}
+Distances\\
+\begin{tabular}{l c c c c c c c c r}
+\hline
+\hline
+ & $r(1C)$ & $r(2C)$ & $r(3C)$ & $r(12)$ & $r(13)$ & $r(34)$ & $r(23)$ & $r(25)$ & $a_{\text{Si}}^{\text{equi}}$\\
+\hline
+Erhard/Albe & 0.175 & 0.329 & 0.186 & 0.226 & 0.300 & 0.343 & 0.423 & 0.425 & 0.543 \\
+VASP & 0.174 & 0.341 & 0.182 & 0.229 & 0.286 & 0.347 & 0.422 & 0.417 & 0.548 \\
+\hline
+\hline
+\end{tabular}\\[0.5cm]
+\end{center}
+\begin{center}
+Angles\\
+\begin{tabular}{l c c c c }
+\hline
+\hline
+ & $\theta_1$ & $\theta_2$ & $\theta_3$ & $\theta_4$ \\
+\hline
+Erhard/Albe & 140.2 & 109.9 & 134.4 & 112.8 \\
+VASP & 130.7 & 114.4 & 146.0 & 107.0 \\
+\hline
+\hline
+\end{tabular}\\[0.5cm]
+\end{center}
+\caption[Atomic displacements, distances and bond angles of the \hkl<1 0 0> dumbbell structure obtained by the Erhard/Albe potential and VASP calculations.]{Atomic displacements, distances and bond angles of the \hkl<1 0 0> dumbbell structure obtained by the Erhard/Albe potential and VASP calculations. The displacements and distances are given in nm and the angles are given in degrees. Displacements, distances and angles are schematically displayed in figure \ref{fig:defects:100db_cmp}. In addition, the equilibrium lattice constant for crystalline silicon is listed.}
+\label{tab:defects:100db_cmp}
+\end{table}
+\begin{figure}[h]
+\begin{center}
+\begin{minipage}{6cm}
+\begin{center}
+\underline{Erhard/Albe}
+\includegraphics[width=5cm]{c_pd_albe/100_cmp.eps}
+\end{center}
+\end{minipage}
+\begin{minipage}{6cm}
+\begin{center}
+\underline{VASP}
+\includegraphics[width=5cm]{c_pd_vasp/100_cmp.eps}
+\end{center}
+\end{minipage}
+\end{center}
+\caption{Comparison of the visualized \hkl<1 0 0> dumbbel structures obtained by Erhard/Albe potential and VASP calculations.}
+\label{fig:defects:100db_vis_cmp}
+\end{figure}
+\begin{figure}[h]
+\begin{center}
+\includegraphics[height=10cm]{c_pd_vasp/eden.eps}
+\includegraphics[height=12cm]{c_pd_vasp/100_2333_ksl.ps}
+\end{center}
+\caption[Charge density isosurface and Kohn-Sham levels of the C \hkl<1 0 0> dumbbell structure obtained by VASP calculations.]{Charge density isosurface and Kohn-Sham levels of the C \hkl<1 0 0> dumbbell structure obtained by VASP calculations. Yellow and grey spheres correspond to silicon and carbon atoms. The blue surface is the charge density isosurface. In the energy level diagram red and green lines and dots mark occupied and unoccupied states.}
+\label{img:defects:charge_den_and_ksl}
+\end{figure}
+The silicon atom numbered '1' and the C atom compose the dumbbell structure.
+They share the lattice site which is indicated by the dashed red circle and which they are displaced from by length $a$ and $b$ respectively.
+The atoms no longer have four tetrahedral bonds to the silicon atoms located on the alternating opposite edges of the cube.
+Instead, each of the dumbbell atoms forms threefold coordinated bonds, which are located in a plane.
+One bond is formed to the other dumbbell atom.
+The other two bonds are bonds to the two silicon edge atoms located in the opposite direction of the dumbbell atom.
+The distance of the two dumbbell atoms is almost the same for both types of calculations.
+However, in the case of the VASP calculation, the dumbbell structure is pushed upwards compared to the Erhard/Albe results.
+This is easily identified by comparing the values for $a$ and $b$ and the two structures in figure \ref{fig:defects:100db_vis_cmp}.
+Thus, the angles of bonds of the silicon dumbbell atom ($\theta_1$ and $\theta_2$) are closer to $120^{\circ}$ signifying the predominance of $sp^2$ hybridization.
+On the other hand, the carbon atom forms an almost collinear bond ($\theta_3$) with the two silicon edge atoms implying the predominance of $p$ and $sp$ bonding.
+This is supported by the image of the charge density isosurface in figure \ref{img:defects:charge_den_and_ksl}.
+In the same figure the Kohn-Sham levels are shown.
+There is no magnetization density.
+An acceptor level arises resulting in a band gap of 0.35 eV compared to 0.75 eV as obtained for plain silicon.
+
+\subsection{Bond-centered interstitial configuration}
+\label{subsection:bc}
+
+In the bond-centerd insterstitial configuration the interstitial atom is located inbetween two next neighboured silicon atoms.
+In former studies this configuration is found to be an intermediate saddle point configuration determining the migration barrier of one possibe migration path of a \hkl<1 0 0> dumbbel configuration into another one \cite{capaz94}.
+Hier ist es aber ein echtes Minimum.
+Eine 'weitere' Barriere muss ueberschritten werden um dahin zu kommen.
+Genaueres in section \ref{subsection:100mig}.
+Die Konfiguration besitzt ein magnetisches Moment.
+Bild der spin-ladungen.
\section[Migration of the carbon \hkl<1 0 0> interstitial]{\boldmath Migration of the carbon \hkl<1 0 0> interstitial}
+\label{subsection:100mig}
+
+In the following the problem of interstitial carbon migration in silicon is considered.
\section{Combination of point defects}
projects / lectures / latex.git / blobdiff