\centerslidesfalse
% skip for preparation
-\ifnum1=0
+%\ifnum1=0
% intro
\end{tabular}
\begin{pspicture}(0,0)(0,0)
-\psellipse[linecolor=green](5.7,2.10)(0.4,0.5)
+\psellipse[linecolor=green](5.7,2.10)(0.4,0.53)
\end{pspicture}
\begin{pspicture}(0,0)(0,0)
-\psellipse[linecolor=green](5.6,0.92)(0.4,0.2)
+\psellipse[linecolor=green](5.6,0.92)(0.4,0.23)
\end{pspicture}
\begin{pspicture}(0,0)(0,0)
-\psellipse[linecolor=red](10.45,0.45)(0.4,0.2)
+\psellipse[linecolor=red](10.45,0.45)(0.4,0.23)
\end{pspicture}
\end{slide}
-\fi
+%\fi
% fabrication
\begin{picture}(0,0)(-310,-20)
\includegraphics[width=2.0cm]{cree.eps}
\end{picture}
-{\color{red}\scriptsize Mismatch in thermal expansion coeefficient
- and lattice paramater}
-\vspace{-0.2cm}
+\vspace{-0.5cm}
+
+\begin{center}
+\color{red}
+\framebox{
+{\footnotesize\color{black}
+ Mismatch in \underline{thermal expansion coeefficient}
+ and \underline{lattice parameter} w.r.t. substrate
+}
+}
+\end{center}
+
+\vspace{0.1cm}
{\bf Alternative approach}\\
Ion beam synthesis (IBS) of burried 3C-SiC layers in Si\hkl(1 0 0)
}
\begin{minipage}{5.5cm}
\begin{center}
-{\small
+{\footnotesize
No surface bending effects\\
-$\Rightarrow$ Synthesis of large area SiC films possible
+High areal homogenity\\[0.1cm]
+$\Downarrow$\\[0.1cm]
+Synthesis of large area SiC films possible
}
\end{center}
\end{minipage}
\end{slide}
-\end{document}
+%\end{document}
% temp
-\ifnum1=0
+%\ifnum1=0
% contents
\end{document}
-\fi
+%\fi
welcome everybody to the the defense of my doctor's thesis entitled ...
as usual, i would like to start with a small motivation,
which in this case focuses on the materials system, SiC.
+and, thereby, approach the problem to be investigated within this study.
slide 2
however, nowadays, much progress has been achieved in SiC thin film growth.
indeed, commerically available semiconductor devices based on alpha SiC exist,
although these are still extremely expensive.
-However, production of the advantageous 3c polytype material is less advanced.
+however, production of the advantageous cubic polytype material is less advanced.
mismatches in the thermal expansion coefficient and the lattice parameter
(with respect to the substrate) cause a considerable amount of defects,
which is responsible for structural and electrical qualities
that are not yet satisfactory.
next to CVD and MBE, the ion beam synthesis technique, which consists of
-high dose ion implantation foolowed by a high-temperature annealing step
-turned out to constitute a promising method to form buried layers of SiC in Si.
-...
+high dose ion implantation followed by a high-temperature annealing step
+turned out to constitute a promising method to form buried layers of SiC in Si
+as indicated in this sketch.
+due to the high areal homogenity achieved in ibs
+the size is only limited by the beam scanning equipment
+and sythesized films do not exhibit surface bending effects
+in contrast these formed by cvd and mbe.
+this enables the synthesis of large are SiC films.
slide 5
-...
+the ibs synthesis of ...
and the task of this work is to gain insight into SiC precipitation in silicon.
slide 6
-this (insight) is achieved by atomistic simulations, which are explained after the assumed precipitation mechnisms present in literature are presented ...
+supposed conv mech
+
slide 7
+
+however, controversial ... exists in literature
+
slide 8
+
+this (insight) is achieved by atomistic simulations, which are explained after the assumed precipitation mechnisms present in literature are presented ...
+
slide 9
slide 10
slide 11